VCDS (VAG-COM) codes and programmable options for Golf Mk7

[Jap]

One more question;
What’s the long coding for disabling the overtaking in the left lane...my car slows down when I merge into traffic, and won’t go past a slow moving car iif it’s in the outside lane....

discussed in the other thread mate
i think it was worked out to be (on obdeleven)

acc
long coding
byte 02
overtaking_right_prevention set to not active

[Blackpaladin67]

discussed in the other thread mate
i think it was worked out to be (on obdeleven)

acc
long coding
byte 02
overtaking_right_prevention set to not active

Actually its active and needs to be not active

Sent from my SM-G935F using Tapatalk

[Jap]

Actually its active and needs to be not active

Sent from my SM-G935F using Tapatalk

i was saying set to not active

[sVWatt]

Actually its active and needs to be not active

Sent from my SM-G935F using Tapatalk

Much appreciated

[Blackpaladin67]

i was saying set to not active

This is what happens when you mix postings and red wine ...lol
Appoliges Jap...

Sent from my SM-G935F using Tapatalk

[Jap]

This is what happens when you mix postings and red wine ...lol
Appoliges Jap...

Sent from my SM-G935F using Tapatalk

no problem, just don’t mix programming with red wine, your car might be a bit wobbly and I darnt think what the sat nav would say

[bgroper]

VAG have lotsa TLA systems in their cars.
I hope they don't implement any AII system.

TLA = Three Letter Acronym
AII = Alcohol Ignition Interlock.

[sVWatt]

and with over take lane right 'deactivated' I enjoyed a smooth journey to work, merging without issue.
cheers.

this OBDeleven is awesome.

[Blackpaladin67]

and with over take lane right 'deactivated' I enjoyed a smooth journey to work, merging without issue.
cheers.

this OBDeleven is awesome.

Told ya it was good...its super good.Have the Passat & Golfs got the same issue?

Sent from my SM-G935F using Tapatalk

[ThatsMe]

Hi,
Is anyone able to give full OBDEleven instructions for the below on a 7.5 Golf R -

Enable Traffic Sign Recognition
Remove the drive safely nag screen on head unit at startup

Thanks

[DV52]

Hi,
Is anyone able to give full OBDEleven instructions for the below on a 7.5 Golf R -

Enable Traffic Sign Recognition
Remove the drive safely nag screen on head unit at startup

Thanks

That'sMe: Sure, but you have to promise not to tell Adam (the SuperModerator) that I've posted OBD11 tweak instructions in a VCDS thread -it's got to be our secret

TMC is done like this:



But you need to make sure that the RDS (Radio Data Service) is enabled on the car. I'm not sure if this is factory set by VW on a mk7.5 - some new model Tiggys don't have this enabled as default. So you have select coding in the second screen above and check this:



You need to check that the entry byte_14_RDS-deactivation is set to No and also (not highlighted in the picture above), make sure that byte13_Radio_Text_Plus is set to Activated
After you make these changes, I've sometimes found that a reset of the MIB unit is necessary (press and hold down the ON/OFF button until the MIB turns-off, then turns-on again)


For the nag screen delete, do this:



Don

[ThatsMe]

That'sMe: Sure, but you have to promise not to tell Adam (the SuperModerator) that I've posted OBD11 tweak instructions in a VCDS thread -it's got to be our secret

Don

Thanks Don, your a legend!!!

I disabled the nag screen which works fine, i already had the TMC enabled, but i was after the Traffic Sign Recognition, do you know how to enable this?

Cheers
Rik

P.S. Apologies for having this in the wrong thread.

[DV52]

Thanks Don, your a legend!!!

I disabled the nag screen which works fine, i already had the TMC enabled, but i was after the Traffic Sign Recognition, do you know how to enable this?

Cheers
Rik

P.S. Apologies for having this in the wrong thread.

Rik: I've not personally implemented the Traffic Sign Recognition tweak, but here's my understanding of the process (in OBD11 speak):

Note: multi-function camera must be installed.

Select module called Dashboard @ address hex17
Select coding
Navigate to Byte 5, enter tick in Bit 2

Select module called Information Control Unit 1 @ address hex5F
Select adaptation
Search for Car_Function_List_BAP_Gen2
Select traffic_sign_recognition_0x21 and change setting to enabled
Search for Car_Function_Adaptations_Gen2
Select menu_display_road_sign_identification and change setting to enabled
Select menu_display_road_sign_identification_over_thresho ld_high and change setting to enabled

Select module called Front Sensors Driver Assistance System (@ address hexA5)
Select coding
Navigate to Byte 1, enter tick in Bit 0
Select Adaptation
Search and select Display end of speed limit symbol and change to activated
Search and select Display valid additional signs and set value to 00100111

Note: if OBD11 asks for a security code for A5, or 5F modules - enter 20103

Don

[iant333]

I've tried (unsuccessfully) to get rid of the nag screen using VCDS (Ross-Tech V 18.1) but the info provided on this website about doing this process seems to be a bit old or maybe I'm just a bit dim? I am a newbie to this stuff but I have tried to follow the instructions and I don't see exactly the screens as provided. I don't have OBD2. I know it's boring but I have tried to find a clear explanation but have come up short. Is there anyone who could provide some screen shots of the process using the latest version. I have a 7.5R.

[Blackpaladin67]

I've tried (unsuccessfully) to get rid of the nag screen using VCDS (Ross-Tech V 18.1) but the info provided on this website about doing this process seems to be a bit old or maybe I'm just a bit dim? I am a newbie to this stuff but I have tried to follow the instructions and I don't see exactly the screens as provided. I don't have OBD2. I know it's boring but I have tried to find a clear explanation but have come up short. Is there anyone who could provide some screen shots of the process using the latest version. I have a 7.5R.

You cant rid of the screen as it is not fusion mode which is impossible to do with our maps for TSR

Sent from my SM-G935F using Tapatalk