The_Hawk:OK, at the risk of monopolizing this thread -"keep it coming" I will!!
Does the new software have an UNDO function - some other car forums have this facility? If so, it is mighty helpful for those that tend to be more verbose in their posts (like someone whose identity...
DV52
Volkswagen Fanatic
Last Activity: Today, 08:57 AM
Joined: 23-09-2013
Location: Victoria
-
Sam: Yeah - the 1.8T 20V engine is ubiquitous across many car Brands albeit it's not an engine with which I'm familiar.
As for the specific questions in your post- let's start with terminology and let's give this unit its formal VAG name "Throttle Valve Module" - and let's...Last edited by DV52; 03-06-2025, 05:04 PM.Leave a comment:
-
@the_hawk: Excellent!!
I notice that you have restored both Signatures and Avatars from the old software. Well done - take $20 out of the Watercooled petty-cash tin (tell the accountant that I said that it is OK)!!
Just one further suggestion and I'll remain silent - the...Leave a comment:
-
I like it!! Very neat and a much closer "look" like other car forums on the electric internet (so easier to learn and navigate the forum features).
Not sure why "Grunge" was chosen as the default theme - probably because the decision was left to the code-cutter!!
...
Last edited by DV52; 01-06-2025, 10:33 AM.Leave a comment:
-
sambb: Hi.
Hmm..... very ambitious quest indeed!! I wish you luck finding out anything about the internal circuit specifications on ANY VAG module. These matters are almost certainly closely held commercial secrets by the deities on the VAG mother-ship and the module specs are likely ONLY...Last edited by DV52; 01-06-2025, 09:59 AM.Leave a comment:
-
FastMitch: the pleasure was mine!!Leave a comment:
-
@FastMitch: According to my information for Byte 23 on the 5F module:- Bit 1 = Initial Disclaimer
- Bit 2 = Legal Disclaimer
On you screenshot for Byte 23:- Bit 1 is activated - meaning that it's ticked and hence Initial Disclaimer is active
- Bit 2 is NOT activated - meaning no tick and
Last edited by DV52; 25-05-2025, 01:25 PM.Leave a comment:
-
FastMitch: Hi.
I've only used Veepeak once - so I'm not a confident user of this tool. However, my understanding is that this ELM327 device is sold as a dongle only - meaning there is NO Veepack specific software.
AFAIK, Veepeak uses third-party software from a other diagnostic...Leave a comment:
-
ImARocket: hi. A healthy sense of ego in your words - which is a good thing!
Hmmm...don't take offense because none is intended - but everything about your post (including your forum name and the thinly-veiled misogynist humor) screams loudly a young car owner (ain't nothing wrong...Last edited by DV52; 22-05-2025, 11:04 AM.Leave a comment:
-
@Sunny43.5: Hi.
I'm not familiar with the tail-light wiring on a Transporter - but this retrofit has been done many times on other VAG vehicles. The fundamental issue when fitting LED tail-lights to a car that was factory built with incandescent lamps in the tail-lights is the number of...Leave a comment:
-
clinton: OK - if you are sure that is the piece!
To access the Temperature flap control motor on a RHD car, you just need to remove the center console trim in the footwell (the trim on the side of the console body. Below is a picture of the trim on a LHD car (I couldn't find the equivalent...Leave a comment:
No activity results to display
Leave a comment: