VCDS (VAG-COM) codes and programmable options for Golf Mk7

[Bizmo]

-------------------------------------------------------------------------------
Address 01: Engine (J623-CZEA)       Labels: 04E-907-309-V1.clb
   Part No SW: 04E 906 027 HF    HW: 04E 907 309 BJ
   Component: R4 1.4l TFS   H22 2326  
   Revision: R6H22---    
   Coding: 0119003223441D082000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM14TFS01104E906027HF 001004
   ROD: EV_ECM14TFS01104E906027HF.rod
   VCID: 6FC33DBAB624AD46B4-803A


Readiness: 0000 0000


-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 3Q0 907 379 AA    HW: 3Q0 907 379 F
   Component: ESC           H42 0623  
   Revision: 00000000    Serial number: 61735000000178
   Coding: 01FA8AA1242429750779060641CC2980512494E0608294F314205078C002
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
   ROD: EV_Brake1UDSContiMK100IPB_VW37.rod
   VCID: 79D703E2F860F3F61A-802C



-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 5G0-907-044.clb
   Part No SW: 5G0 907 044 BC    HW: 5G0 907 044 BC
   Component: Climatronic   H03 1001  
   Revision: 00001K08    
   Coding: 00120004100100011005004000101002
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACClimaBHBVW37X 004131
   ROD: EV_ACClimaBHBVW37X_SK37.rod
   VCID: 69F753A288C04376EA-803C


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: None
   Part No SW: 5Q0 937 084 AQ    HW: 5Q0 937 084 AL
   Component: BCM MQBAB M   H24 0173  
   Serial number: 01061517400714
   Coding: 03000842C24102FB0BA44080B10403281000000000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_BCMMQB 015001
   ROD: EV_BCMBOSCH_AU37.rod
   VCID: 0733751ABE9495061C-8052


   Slave 1: 
   Subsystem 1 - Part No SW: 5G2 955 119 A    HW: 5G2 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    150613  042 0551 
   Serial number:         150621004624
   Coding: 0E4DDD


   Slave 2: 
   Subsystem 2 - Part No SW: 5Q0 955 547 A    HW: 5Q0 955 547 A  Labels: 5Q0-955-547.CLB
   Component: RLHS  037 0059 
   Serial number: S5Y15M07D01H11M02S40
   Coding: 96A8DD


   Subsystem 3 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
   Component: Sensor, DWA  006 0326 
   Serial number: 000000000ZY151530JPD


   Subsystem 4 - Part No SW: 5Q0 951 605     HW: 5Q0 951 605 
   Component: Sirene, DWA  004 0311 
   Serial number: 00000000000062798780



-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 5Q0-919-294.clb
   Part No SW: 5Q0 919 294 K    HW: 5Q0 919 294 A
   Component: PARKHILFE 8K  H03 0054  
   Revision: --------    Serial number: 39331518005881
   Coding: 0071051001
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA18AU3700000 002026
   ROD: EV_EPHVA18AU3700000_SK48.rod
   VCID: 43ABA10ACA2C792600-8016



-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels: 5Q0-907-572.clb
   Part No SW: 5Q0 907 572 F    HW: 5Q0 907 572 F
   Component: ACC Bosch MQB H05 0400  
   Serial number: 27051503210263
   Coding: 00000300FE0739
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCMRRBoschVW372 001016
   ROD: EV_ACCMRRBoschVW372_AU37.rod
   VCID: 3A55DCEEBDE638EE53-806E



-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 AA    HW: 5Q0 959 655 AA
   Component: AirbagVW20    015 0388  
   Serial number: 003MLR0W7H77
   Coding: 98CCC000000000005C0000CF00C800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002130
   ROD: EV_AirbaVW20SMEVW37X_AU37.rod
   VCID: 7F23EDFAE644DDC624-802A


   Seat belt tensioner; left: 
   Subsystem 1 - Part No SW: 5G0 980 945 B    HW: 5G0 980 945 B
   Component: BeltPretRevFL  H36 0350 
   Serial number: 34169677B29061571106
   Coding: 333135


   Seat belt tensioner; right: 
   Subsystem 2 - Part No SW: 5G0 980 946 B    HW: 5G0 980 946 B
   Component: BeltPretRevFR  H36 0350 
   Serial number: 34169676B30061510105
   Coding: 333135


   Crash sensor for side airbag; driver side: 
   Subsystem 3 - Part No SW: -----------    HW: 480 002 606 15
   Component: SideSensor_Df  001 0887 
   Serial number: 35767000000DDA40C41%
   Coding: 2D2D2D


   Crash sensor for side airbag; front passenger side: 
   Subsystem 4 - Part No SW: -----------    HW: 480 002 506 15
   Component: SideSensor_Pf  001 0887 
   Serial number: 3586700000020749841L
   Coding: 2D2D2D


   Crash sensor for side airbag; rear; driver side: 
   Subsystem 5 - Part No SW: -----------    HW: 480 402 306 15
   Component: SideSensor_Dr  001 6149 
   Serial number: 35165029B1C52F3490CJ
   Coding: 2D2D2D


   Crash sensor for side airbag; rear; passenger side: 
   Subsystem 6 - Part No SW: -----------    HW: 480 402 206 15
   Component: SideSensor_Pr  001 6149 
   Serial number: 3526502A31B5A884914B
   Coding: 2D2D2D


   Crash sensor for front airbag; driver side: 
   Subsystem 7 - Part No SW: -----------    HW: 480 402 306 15
   Component: FrontSensor_D  001 6149 
   Serial number: 3556502C91C52F35C26O
   Coding: 2D2D2D



-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels: 5Q0-953-549.clb
   Part No SW: 5Q0 953 507 GK    HW: 5Q0 953 549 E
   Component: Lenks. Modul  003 0110  
   Revision: --------    Serial number: 26061504400352
   Coding: 0C00
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SMLSKLOMQB 017001
   ROD: EV_SMLSKLOMQB_SE37.rod
   VCID: 052F7F12849887166E-8050



-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5G0-920-XXX-17.clb
   Part No SW: 5G1 920 940 A    HW: 5G1 920 940 A
   Component: KOMBI         202 6420  
   Coding: 27A519002780260001886A011400000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009046
   ROD: EV_DashBoardVDDMQBAB_AU37.rod
   VCID: 266D189E595EAC0E07-8072



-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AF    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1223  
   Revision: --------    Serial number: 0003661951
   Coding: 030100043F085700FB00025C080F00010001050000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear.rod
   VCID: 75CF0FD2D47897967E-8020


   Alternator: 


   Multifunction unit control module: 
   Subsystem 2 - Part No SW: 5G0 959 442 K    HW: 5G0 959 442 K
   Component: E221__MFL-DC1  H16 0040 
   Serial number: 29150001361390025267
   Coding: 2CFFFF


   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 G    HW: 5Q0 915 181 G
   Component: J367-BDMHella  H04 8050 
   Serial number: 3568387103          



-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels: 5QX-959-X93-42.clb
   Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
   Component: TSG FS        020 0041  
   Serial number: 240615BFN16549
   Coding: 003B0220D001048000001000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
   ROD: EV_DCUDriveSideEWMAXCONT_AU37.rod
   VCID: 43ABA10ACA2C792600-8016


   Subsystem 1 - Part No SW: 5Q0 959 812     HW: 5Q0 959 812 
   Component: FOND_FHSG_DRV  005 0005 
   Serial number: 00000000000006623359
   Coding: 0D0000



-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels: 5Q0-909-144.clb
   Part No SW: 5Q0 909 144 R    HW: 5Q0 909 144 R
   Component: EPS_MQB_ZFLS  125 1061  
   Coding: 8103
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 012140
   ROD: EV_SteerAssisMQB.rod
   VCID: 43ABA10ACA2C792600-8016



-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels: 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041  
   Serial number: 170615BFG06812
   Coding: 003B0020DE01048000801000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT_AU37.rod
   VCID: 42A5A40ED536702E0B-8016


   Subsystem 1 - Part No SW: 5Q0 959 811     HW: 5Q0 959 811 
   Component: FOND_FHSG_PSG  005 0005 
   Serial number: 00000000000006536680
   Coding: 150000



-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels: None
   Part No SW: 3Q0 035 874 A    HW: 3Q0 035 874 A
   Component: MU-S-ND-ER    820 0611  
   Serial number:               
   Coding: 02730001FF00000051111101008808001F0100C601200100CF
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW26.rod
   VCID: 3041FEC66B9AF2BEED-8064


   Media Player Position 1: 
   Subsystem 1 - Part No SW: 3G0 919 605 D    HW: 3G0 919 605 D
   Component: ABT_Std-2_Nav  H43 4060 
   Serial number: VWZ6Z9R1810374      


   Engine Control Module 2: 
   Subsystem 2 - Part No SW: 3G0 919 866 H    HW: -----------
   Component: ECE 2015/16  --- 0430 
   Serial number: --------------------




End-------------------------(Elapsed Time: 03:26)--------------------------

While I am at it here is the link to the controller map for 5F information electronics (too big for post!) any chance someone with app connect enabled could do the same so we can compare!

[jonoz]

Not sure if this is the right place but randomly the auto open/close on the drivers side window does not function, where you press the button down and the window winds the whole way down?

I made some VCDS tweaks, like auto rain closing etc, just wondering if there is a way to reset everything to defaults to check nothing is messing with the window auto close/open?

[agentthumb]

Not sure if this is the right place but randomly the auto open/close on the drivers side window does not function, where you press the button down and the window winds the whole way down?

I made some VCDS tweaks, like auto rain closing etc, just wondering if there is a way to reset everything to defaults to check nothing is messing with the window auto close/open?

Jonoz, I have the same issue, but up to this point, have attributed it to the way the driver side button is tucked away in an awkward corner, and I just can't get a proper deep press in to trigger the auto open/close function.

What year model is yours? Mine is MY15.



Sent from my iPhone using Tapatalk

[jonoz]

Jonoz, I have the same issue, but up to this point, have attributed it to the way the driver side button is tucked away in an awkward corner, and I just can't get a proper deep press in to trigger the auto open/close function.

What year model is yours? Mine is MY15.



Sent from my iPhone using Tapatalk

Yeah MY15, I definitely feel it doing the deep press but it just dosent do anything both open and close.

[agentthumb]

Interesting. Have you got a scan of your driver side electric? Would be good to compare ours against a MY14 or 13 car just to see if the hardware and software changed.

Here's mine:

Address 42: Door Elect, Driver (J386)       Labels: 5QX-959-X93-42.clb
   Part No SW: 5Q4 959 593 C    HW: 5Q4 959 593 B
   Component: TSG FS        009 0015  
   Serial number: 0000140235596 
   Coding: 003A03208001028000000000
   Shop #: WSC 00028 028 00067
   ASAM Dataset: EV_DCUDriveSideEWMAXCONT 006001
   ROD: EV_DCUDriveSideEWMAXCONT_AU37.rod
   VCID: 45AFA0CAC4D9D21626-8011


   Subsystem 1 - Part No SW: 5Q4 959 812 A    HW: 5Q4 959 812 A
   Component: Fond FHSG DRV  007 0002 
   Serial number: 00000000000000974756
   Coding: 0D0000

Sent from my iPhone using Tapatalk

[DV52]

1. Not sure if this is the right place but randomly the auto open/close on the drivers side window does not function, where you press the button down and the window winds the whole way down?
   
   I made some VCDS tweaks, like auto rain closing etc, just wondering if there is a way to reset everything to defaults to check nothing is messing with the window auto close/open?

   Jonoz: Hi.
   
   Intermittent faults are a bitch to find and fix, but you might try the following:
   1. Check if convenience opening and closing is set correctly
   1. Press the CAR button on the RH side of the Discover media Unit
   2. Press the set-up panel on the bottom RH side of the screen
   3. Press the Opening and Closing panel
   4. Make sure that the settings for Convenience opening option is set to All windows
   5. Exit the screen

2. Check the codinglog.txt file on your laptop. This will enable you to validate the VCDS tweak changes that you have already (please don't be offended-I'm not suggesting that they were incorrectly made). If you are not aware of how to do this, I wrote a short primer on the process which you can find HERE

3. Reset
As for your question about how to reset everything, you can reset the MENU functions in the car using the following process:

1. Press the CAR button on the RH side of the Discover media Unit
2. Press the set-up panel on the bottom RH side of the screen
3. Select Factory Setting panel (it's the very last entry on the list)
4. On the Factory Setting screen, select Reset all Settings
5. Press the Reset panel

However, If your question was about how to reset the tweak changes that you previously made, you can use the information in the Codinglog.txt file to roll-back any modified coding, or adaptation channels.
Cheers and good luck
Don

PS: As I write in my paper, the codinglog.txt file can be a bit confusing if you have made lots of changes. If you post-up a copy where it can be downloaded, I'm sure that someone here will parse the data for you so that it is more readable

[jonoz]

1. 
   
   Jonoz: Hi.
   
   Intermittent faults are a bitch to find and fix, but you might try the following:
   1. Check if convenience opening and closing is set correctly
   1. Press the CAR button on the RH side of the Discover media Unit
   2. Press the set-up panel on the bottom RH side of the screen
   3. Press the Opening and Closing panel
   4. Place a tick in the Automatic closing in rain panel as shown in the picture below.
   5. Make sure that the settings for Convenience opening option is set to All windows
   6. Exit the screen

2. Check the codinglog.txt file on your laptop. This will enable you to validate the VCDS tweak changes that you have already (please don't be offended-I'm not suggesting that they were incorrectly made). If you are not aware of how to do this, I wrote a short primer on the process which you can find HERE

3. Reset
As for your question about how to reset everything, you can reset the MENU functions in the car using the following process:

1. Press the CAR button on the RH side of the Discover media Unit
2. Press the set-up panel on the bottom RH side of the screen
3. Select Factory Setting panel (it's the very last entry on the list)
4. On the Factory Setting screen, select Reset all Settings
5. Press the Reset panel

However, If your question was about how to reset the tweak changes that you previously made, you can use the information in the Codinglog.txt file to roll-back any modified coding, or adaptation channels.
Cheers and good luck
Don

PS: the codinglog.txt file can be a bit confusing if you have made lots of changes. If you post-up a copy where it can be downloaded, I'm sure that someone here will parse the data for you so that it is more readable

Ah thats it! The reset settings option, might do that and see how I go.

Pretty sure I dont have the laptop I made the coding changes on anymore unfortunately [emoji26]

[sucnip]

Not sure if this is the right place but randomly the auto open/close on the drivers side window does not function, where you press the button down and the window winds the whole way down?

This is easy to fix and has nothing to do with VCDS. Simply hold the button down and wait till the window rolls down completely. Not roll the window up all the way in one go. Now one touch opening and closing should work fine.

Sucnip

[jonoz]

This is easy to fix and has nothing to do with VCDS. Simply hold the button down and wait till the window rolls down completely. Not roll the window up all the way in one go. Now one touch opening and closing should work fine.

Sucnip

Ill give it a shot! Funny thing is the settings don't seem to do anything as if I set Conven. Opening to Off all the other windows still auto open.

[DV52]

While I am at it here is the link to the controller map for 5F information electronics (too big for post!) any chance someone with app connect enabled could do the same so we can compare!

Bizmo: Sorry to read that your troubles continue.

But not sure that comparing auto-scan reports will add much value in solving your problem. Here is the auto scan report for address Hex17 from an aussie MY16 TSI Highline (thanks chendo)

Address 17: Instruments (J285) Labels: 5G0-920-XXX-17.clb
Part No SW: 5G1 920 740 A HW: 5G1 920 740 A
Component: KOMBI 207 7640
Coding: 27A419182F98000800886A095400000000000000
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_DashBoardJCIMQBAB 009005
ROD: EV_DashBoardJCIMQBAB_SK37.rod
VCID: 244C2BA02F2A581E11-8070

For reference, your same control module report was:
Address 17: Instruments (J285) Labels: 5G0-920-XXX-17.clb
Part No SW: 5G1 920 940 A HW: 5G1 920 940 A
Component: KOMBI 202 6420
Coding: 27A519002780260001886A011400000000000000
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_DashBoardVDDMQBAB 009046
ROD: EV_DashBoardVDDMQBAB_AU37.rod
VCID: 266D189E595EAC0E07-8072

The instrument control module in my car is a 5G0 series and yours is the 5G1 series.
I know that the security code works on 5G0 modules. And, a few pages back in this thread, agentthumb implemented the tweak and he didn't report a security code error. Agentthumb's control module details for address Hex17 are ;SW:5G1-920-740 HW:5G1-920-740. This suggests that the security code does work on series 5G1 modules

cheers
Don

PS: Thanks also for the Hex5F information. It was good to be able to compare your adaptation map for the new generation infotainment unit with it's Australian counterpart. VW's new MIBII certainly looks like a very impressive beast! It seems to be functionally rich where apps are concerned and very "hot-spot/WAN" friendly

[HPSOV]

Hi All,

I bought the Ross Tech cable and have enabled a few of the tweaks listed on this site. I would like to enable the Traffic Information, however both of the posts linked in the tweak reference thread refer to changing the default value of 0 to 1024. But my default value isn't 0, it is a 5 digit number, something like 16652. So I am hesitant to change it to 1024 as it doesn't match what other have seen, I wonder if this is a MY16 change as my car has the newer infotainment system.
When I am on the Nav screen there is a TP at the top, but when I press the traffic button there are no reports and TMC has a line through it. I assume this means traffic isn't enabled.
Am I safe to change the 16652 to 1024 and see what happens?

[agentthumb]

VCDS (VAG-COM) codes and programmable options for Golf Mk7

Hi All,

I bought the Ross Tech cable and have enabled a few of the tweaks listed on this site. I would like to enable the Traffic Information, however both of the posts linked in the tweak reference thread refer to changing the default value of 0 to 1024. But my default value isn't 0, it is a 5 digit number, something like 16652. So I am hesitant to change it to 1024 as it doesn't match what other have seen, I wonder if this is a MY16 change as my car has the newer infotainment system.
When I am on the Nav screen there is a TP at the top, but when I press the traffic button there are no reports and TMC has a line through it. I assume this means traffic isn't enabled.
Am I safe to change the 16652 to 1024 and see what happens?

Yes. My MY15 had 16652 as well. Worst case you can just change it back.


Sent from my iPhone using Tapatalk

[Bizmo]

Bizmo: Sorry to read that your troubles continue.

But not sure that comparing auto-scan reports will add much value in solving your problem. Here is the auto scan report for address Hex17 from an aussie MY16 TSI Highline (thanks chendo)

Address 17: Instruments (J285) Labels: 5G0-920-XXX-17.clb
Part No SW: 5G1 920 740 A HW: 5G1 920 740 A
Component: KOMBI 207 7640
Coding: 27A419182F98000800886A095400000000000000
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_DashBoardJCIMQBAB 009005
ROD: EV_DashBoardJCIMQBAB_SK37.rod
VCID: 244C2BA02F2A581E11-8070

For reference, your same control module report was:
Address 17: Instruments (J285) Labels: 5G0-920-XXX-17.clb
Part No SW: 5G1 920 940 A HW: 5G1 920 940 A
Component: KOMBI 202 6420
Coding: 27A519002780260001886A011400000000000000
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_DashBoardVDDMQBAB 009046
ROD: EV_DashBoardVDDMQBAB_AU37.rod
VCID: 266D189E595EAC0E07-8072

The instrument control module in my car is a 5G0 series and yours is the 5G1 series.
I know that the security code works on 5G0 modules. And, a few pages back in this thread, agentthumb implemented the tweak and he didn't report a security code error. Agentthumb's control module details for address Hex17 are ;SW:5G1-920-740 HW:5G1-920-740. This suggests that the security code does work on series 5G1 modules

cheers
Don

PS: Thanks also for the Hex5F information. It was good to be able to compare your adaptation map for the new generation infotainment unit with it's Australian counterpart. VW's new MIBII certainly looks like a very impressive beast! It seems to be functionally rich where apps are concerned and very "hot-spot/WAN" friendly

Hmm thanks anyway, will keep trying!

I was supplying the 5F coding, for a completly different tweak, sorry didn't make it very clear! I was wondering if it was possible to enable app connect via VCDS. I understand that the 5F module is difficult for VCDS to read for some reason and that's why it hasn't got the label files.

EDIT: On further examination in the mib2 menu by pressing and holding menu it would appear that the app connect is a software update like the voice control

[DV52]

Electric Parking Brake (EPB)- Open/close procedure for Pad Replacement

Just a heads-up that Ross-Tech have published a process for closing/opening the callipers on EPB versions of the mk7. Handy if you are contemplating the removal/replacement of the rear pads.

The link to the Ross-tech wiki-page is HERE
Cheers
Don

PS: I was asked to try out the procedure on my RoW vehicle before publication and I can vouch that it works perfectly on our Aussie cars!

[Ozram]

I'm trying to activate the TMS function in my daughters MY15 Golf Comfortline. I get the drop down menu for it in control module 5F and after clicking Adaption. When I select it the stored value window has "ERROR function not available" in it and I can't type 1024 as the new value.

Any ideas?