Discover Media retrofit

[kamold]

Menu, screen settings.
Make sure it's set to auto for day/night

[kamold]

Should work, as should dimming using the dial for instrument cluster lighting.
I think there might be a setting for it to be turned on and off?
I'll have to check.

[lunghurts]

Thanks, I've also noticed that the auto day night setting doesn't work in the Nav screen either which also gets sent to Carplay nav as well. Otherwise all travelling well.

[kamold]

Did you get to the bottom of this and correct the issue of the missing Mhz arounf pg 13 of the post? I have a similar problem for AM radio and interested to see what the fix was.

Cluster software doesn't support the data being sent to it.
Only fix is to install a newer cluster.

[lunghurts]

Did you get to the bottom of this and correct the issue of the missing Mhz arounf pg 13 of the post? I have a similar problem for AM radio and interested to see what the fix was.

[kamold]

This is from a post from last year. Can you explain about the 6.5 or 8 in screens? It looks like the MIB2 is only 6.5. Why do you say the poster also needed a new screen?

MIB1 screen is lower resolution. If you upgrade to an MIB2 unit you need to install an MIB2 screen either 6.5 or 8 inch. If you upgrade to MIB2.5 you need a 9.2 inch screen
NOTE: these are ONLY applicable to MQB cars.
For earlier PQ platform cars (Golf 5/6, Passat B6/B7, tiguan Mk1 etc) you can only use 2DIN units like the 6.5inch Discover Media, RNS510, after market options etc

[mark4323]

Hi so i have a headunit from mk7 2013 golf with nav etc. Wondering what model units i can upgrade and fit in there as my current one has an annoying buzz coming from the screen.

You can retrofit an MQB MIB2 unit.
Will also need a new screen (you can use either the 6.5 in or upgrade to 8 inch if you get the surround trim and vents also)

This is from a post from last year. Can you explain about the 6.5 or 8 in screens? It looks like the MIB2 is only 6.5. Why do you say the poster also needed a new screen?

[kamold]

Can you check in adaptations that you don't have clock enabled in BAP features?
Should be set to disabled.

[1zero]

OK there is no date/time setting in the Discover like there was in the RNS510. It reads the time off the CAN from the cluster.
Do the steering wheel controls etc work ok?

I am having the same issue.
Steering wheel controls are still all working fine.
I will attempt a factory reset later and confirm the outcome.

After a factory reset, nothing has changed.
Super frustrating.

[1zero]

I am having the same issue.
Steering wheel controls are still all working fine.
I will attempt a factory reset later and confirm the outcome.

[kamold]

OK there is no date/time setting in the Discover like there was in the RNS510. It reads the time off the CAN from the cluster.
Do the steering wheel controls etc work ok?

[moda]

Haven't seen this behavior at all...odd.
Can you just set the clock in the MFD? It should immediately reflect the time change in the Discover Media.

Weird right. Setting the clock in the MFD doesn't change anything on the Discover Media, it looks like it's grabbing the time from the satellites and overriding whatever you set the time on the MFD to. It also impacts the Discover Media navigation, the time to destination etc is all wrong because it thinks the time is always 12:00. Can't seem to find any setting to adjust the time/date?

[kamold]

Haven't seen this behavior at all...odd.
Can you just set the clock in the MFD? It should immediately reflect the time change in the Discover Media.

[moda]

Ok so maybe dumb question, with the GPS week rollover a few weeks ago, the navigation on my discover media now shows the time as 12:00... I was under the impression that with modern GPS chips it would just sort itself out after a bit? Does it need a software update or something? Have the latest maps installed (Oct 201...

[grtuned]

[emoji106]


Sent from my iPhone using Tapatalk