Discover Media retrofit

[kamold]

You don't need to replace the sensors, just the PDC module.

[cruzbdg]

Park Distance Controller
Original module 3C8919475 HW07 SW007.
This works fine for PDC display on its own however it won't allow the reverse camera image with the PDC overlay on the left hand side. This needs to be replaced with a newer 1k8919475b. This also requires an adapter wiring harness as the connectors changed.

Hi I have retrofitted RCD310 to Discover media 5c0 035 680C mib std2 pq35 + navi. I have the same sympthoms for RVC (when tailgate open, OPS visible and icon gray, when tailgate closed rvc video visible but without OPS and without icon on left toolbar). Images here OneDrive . I would like to ask you, did you have to replace your sensors or not?

I have 1k0 ... 475K bosch pds module and 7L5 919 275B sensors.
Do you know if I can replace covers and sensors keeping my bumper with current holes? Does diameter of hole is different or the same for both sensors? I know that sensors has different construction, but using rubber o-ring with cover from scirocco 2015 or jetta could do the work?

[lunghurts]

@kamold,

I have been reading your posts here with interest. I have a Mk6 2012 R that has RNS510, dynaudio, Reverse camera and bluetooth factory fitted. I am interested in upgrading to the Discover Media system but don't have the skillset or time to complete the upgrade. Wondering if you offer this service and can supply parts. I'ld like to replicate all functionality with the current setup with the addition of Carplay and DAB.

Cheers
Andrew

[kamold]

If you have original camera I'm guessing you are using an RGBS to CVBS converter? They can be a bit hit and miss. You can replace the camera with a cheap aftermarket composite camera and go straight into the Discover media and get a better picture.

[Devious]

I love my retrofitted MIB2 radio in my Passat. There is only one issue I've been having as of late. Whenever it is 2 degrees or lower (Celsius) the rear camera flakes out. When it was a little warmer, it would be black screen when I started the car first thing in the morning and on the way home (5pm so warmer out) it would be working just fine. The camera is original, and would always work, so thinking it is wiring into the MIB or the retrofit adapter for the RCA cable. Any thoughts or ideas to troubleshoot this one?

[Siema Sciema]

I have a 7n0 goal and I would like to mount in the Discaver Pro car. Please, verify the adapter from allxpress which will be correct.

Upgrade Quadlock Extension Adapter Kabel Do Audi A4 A6 Skoda SEAT OPEL BMW VW Golf VI Jetta 5 6 MK5 MK6 Passat B6 w Upgrade Quadlock Extension Adapter Kabel Do Audi A4 A6 Skoda SEAT OPEL BMW VW Golf VI Jetta 5 6 MK5 MK6 Passat B6 od Cables, Adapters & Sockets na Aliexpress.com | Grupa Alibaba

or

BODENLA RCD330 MIB RCD510 Wielofunkcyjne Kierownicy Sterowania Przycisk Symulator Adapter Do VW Golf 5 6 Jetta MK5 Touran Caddy w BODENLA RCD330 MIB RCD510 Wielofunkcyjne Kierownicy Sterowania Przycisk Symulator Adapter Do VW Golf 5 6 Jetta MK5 Touran Caddy od Cables, Adapters & Sockets na Aliexpress.com | Grupa Alibaba

Thank you.

[Siema Sciema]

Discaver Pro

Dobry dzień.

Mam Octavię II FL 2010

[kamold]

Hello, kamold!

Is there any way to check if cp is active or inactive for a mib2 unit? If there's CP active, can i disable it with any tools or sd card software instead of going to vw dealer? I had an issue with my rvc as i told you and when i went to vw dealer they told me that the camera wasn't installed by them and they don't even want to look at my car, even if it's retrofitted with OEM equipment. I don't want to go there again for the CP to tell me the same thing because they will make me angry.

When CP is active there is a message on the screen and it is also seen in diagnostics software

[c0stinn]

Hello, kamold!

Is there any way to check if cp is active or inactive for a mib2 unit? If there's CP active, can i disable it with any tools or sd card software instead of going to vw dealer? I had an issue with my rvc as i told you and when i went to vw dealer they told me that the camera wasn't installed by them and they don't even want to look at my car, even if it's retrofitted with OEM equipment. I don't want to go there again for the CP to tell me the same thing because they will make me angry.

[water_Jetta]

OEM highline camera doesn't work with the new discover media. They are just not compatible even with an rgbs to cvbs converter.
You can either use an aftermarket camera (which are available with moving guidelines that are based on an accelerometer, I have never seen one so can't vouch for them) or by replacing the control module and harness with a 7n0 Tiguan module.

Excellent, I'll have to start identifying my existing part numbers of my gateway and park distance controller. Cheers

[kamold]

OEM highline camera doesn't work with the new discover media. They are just not compatible even with an rgbs to cvbs converter.
You can either use an aftermarket camera (which are available with moving guidelines that are based on an accelerometer, I have never seen one so can't vouch for them) or by replacing the control module and harness with a 7n0 Tiguan module.

[water_Jetta]

Kamold,

Great write up, champion effort.

I installed a RCD330 & RVC in my MY08 Jetta a while back, which was great, but since recently upgrading to a newer Passat the RNS510 has been driving me nuts. I'm a little confused about the details of keeping the OEM highline camera with a new MIB 2 unit. Am I right in thinking that with a new harness, module and parametization I can keep full functionality and image quality? If that's the case I think I'll go ahead and do the upgrade. Are you still offering your services for patched units, map SDcards etc?

[prdriscoll]

Discover media question about volume levels:

In my case, the Android Auto media volume vs all other volumes (radio, BT audio, whatever...) is low. I.e. I always have to double the volume setting when I switch to Android Auto media, then turn it back down again if I switch back to FM radio, in order to get what sounds like consistent volume to my ears. I'm not sure whether the Android Auto media volume is low, or the rest of the volumes are high. My guess is that the rest of the volumes are high - even at only 25% volume, the radio volume is extremely loud.

I know there is a Quiet/Medium/Loud setting in the UI for BT audio (or Low/Medium/High, can't remember). I have to set it to High to be close to the radio volume, and even then the radio volume level is still noticeably louder.

Does anyone know if there is a way to change volume scales or do some other adjustment in VCDS or otherwise to help make the volume levels between different sources more consistent?

I wish/hope there were a volume Low/Medium/High setting for the radio like there is for BT audio...

I also do not know of a way to raise Android Auto media volume on the phone side. If someone knows of such a thing, that would be an effective (but still not optimal) solution too.

[kamold]

What exactly was your bluetooth module? Was it an OEM module or aftermarket?
Impedance on aftermarket mics may not match the OEM ones.
What head unit did you have previously and if RNS510 did you have SDS (speech recognition) working?

[Devious]

Hey agustinfx or others -- when you had to do some wiring in the bt module, can you describe it? Was your bt under the seat or in the armrest? My BT was in the armrest. I tried to follow what patrick did under the seat and I still can't get my mic to work with the mib2 stereo. Everything else is working so this is the last one and I would have thought the least complicated (vs audio, rear camera, integration with the MFI). Trying to figure out what options I have before replacing the mic and running dedicated wires from the mic location to the head unit.

Did anyone else do the mib2 upgrade with their bt unit in the armrest?