Discover Media retrofit

[kamold]

The guy send me a non DAB version, 5C0 035 680 D and I asked for a C. Long story short, he misunderstood me. He said I needed a G version, I insisted I wanted a C but it turns out after I did some more research a G version is also good but harder to get. So i'm waiting to swap it.

Kamold 2 questions

1.About the soundsystem; why is it that everywhere I find those cables from old to new quadlock, there is a note that it won't work with cars that have the soundsystem? How did you get it to work?

2.Worst case scenario, he did use the hardware patch, what kind of cable with can filter am I looking for, and does it affect the radio in every day use?

Many thanks.

Sound system is just coding. Bytes 4-7 and byte 11.
Then adaptation channel for amplifier.
If it has a hardware patch then you need a can filter quadlock harness. PM me and I can put you in touch directly with a seller in Europe.

[jmd]

The guy send me a non DAB version, 5C0 035 680 D and I asked for a C. Long story short, he misunderstood me. He said I needed a G version, I insisted I wanted a C but it turns out after I did some more research a G version is also good but harder to get. So i'm waiting to swap it.

Kamold 2 questions

1.About the soundsystem; why is it that everywhere I find those cables from old to new quadlock, there is a note that it won't work with cars that have the soundsystem? How did you get it to work?

2.Worst case scenario, he did use the hardware patch, what kind of cable with can filter am I looking for, and does it affect the radio in every day use?

Many thanks.

Instrument cluster info:

Address 17: Instruments
Control Module Part Number: 5K6 920 883 L
Component and/or Version: KOMBI H03 0704
Software Coding: 170F01
Work Shop Code: WSC 01383
VCID: 408F79F0DB1A094A95-8014

[jmd]

Okay I got that part covered then. Now I'll wait until everything is my hands and I'll update when it is hopefully working. Thanks for now.

[kamold]

The current method for activation is with a software only patch.
The hardware patch which I have used in the past is now not neccessary.
So if you unit is unopened, it will have been patched via software only and therefor doesn't require a CAN filter.

[jmd]

Thank you for responding. I find your enthusiasm quite inspiring considering there are questions that are being asked multiple times ( bring it in different form )

What do you mean bij patched. The unit is completed cp free and every function is available.

Your link fails.
Edit: link works fine for some reason now. Maybe my phone was the problem.

[kamold]

Yes you can code correctly for Dynaudio amplifier.
Your gateway is fine.

Is your Discover Media already hardware or software patched?
If it is software patched there is no need for a CANbus filter.
If it is hardware patched it will need one.
USB cable you need a proper VW one that has 12v to 5v transformer to allow App Connect to work (same part as MQB) for example:
[url=https://www.ebay.com.au/itm/VW-Kabel-AUX-IN-und-USB-Carplay-fur-MIB-Radio-und-Navi-5G0035222E-1-5m-Cable/174332591078[/url]

[jmd]

I have no more eyeballs left after reading a lot of pages. To get things straight. I’m intending to buy a 5c0035680c discover media for my mk6 golf

I’m going for the simple yes/no answers because maybe I didn’t read the pages good enough and I don’t want to annoy everyone.

My dynaudio amp is from a 2015 scirocco being the:

Address 47: Sound System Labels: 3T0-035-456.clb
Control Module Part Number: 5C6 035 456 C HW: 5C6 035 456 C
Component and/or Version: KonzernAmp10K H08 6831

According to kamold: no problem getting into 5f and coding the unit to dynaudio?

I currently don’t own a RVC, but if I do want one I have to swap the pdc module if I want RVC image combined with OPS. Current module:

Address 10: Park/Steer Assist (J446) Labels: 3C8-919-475.clb
Part No SW: 5K0 919 475 E HW: 5K0 919 475 E
Component: PARKHILFE 8K H01 0012

I don’t exactly know if my gateway is oké. Revision BC I read, but is C a subrevision of B and is my 7N0907530C a higher revision and therefor good enough? (What if I decide not to swap)

And last but not least. My instrument cluster is from a 2016 mk6 golf R cabrio. It is color and sort of 3D. I’ll post that number later today. Unfortunately we are in different timezones. Where do I find a canfilter quadlock cable.

Forgot 1 thing. Mdi isn’t compatible so what usb cable do I need, I personally don’t like Ali for looking up things. It’s an annoying site.

Sorry if there is a lot that’s already been answered.

Gr. Jos

[moda]

Yea, I bought one from this place Atop International Holdings Co.,Limited - Amazing prodcuts with exclusive discounts on AliExpress which has dynamic guidelines, it was more expensive (~$250) than the ones without, but its brilliant.

[kamold]

You can get good aftermarket cameras with proper dynamic guidelines from steering angle data.

Sent from my SM-G960F using Tapatalk

[Fwi98]

RVC low has no 6C control module.
The converters are pretty poor quality.
Your best bet is to replace the RGBS camera with a CVBS camera. Then no converters involved.

I found this one , is it ok ?

€ 14,10 23％ Off | CCD HD Car Reverse Cam Trunk Handle Car Parking Rear View Camera Case for Audi/VW/Passat/Tiguan/Golf/Touran/Jetta/Sharan/Touareg
CCD HD Car Reverse Cam Trunk Handle Car Parking Rear View Camera Case for Audi/VW/Passat/Tiguan/Golf/Touran/Jetta/Sharan/Touareg - AliExpress

[Fwi98]

Ok, can i reuse the existing wire , plug the new composite cam and "rearange" the cable for the new camera or do i need to do a complete new wiring ?
Can you advise me a camera that's fit for Touran 2013. There is so much model , sometimes one detail make the product incompatible.
Thanks

[kamold]

RVC low has no 6C control module.
The converters are pretty poor quality.
Your best bet is to replace the RGBS camera with a CVBS camera. Then no converters involved.

[Fwi98]

If you have original camera I'm guessing you are using an RGBS to CVBS converter? They can be a bit hit and miss. You can replace the camera with a cheap aftermarket composite camera and go straight into the Discover media and get a better picture.

Hello ,
I reuse the original VW low camera with an RGB / CVBS « aliexpress « converter.
As you told somewhere in this thread I connect the « detect » wire to 12V and now I have the rear image on the DM.
But a really very bad image , moving up and down etc..
What is faulty ?
The adapter ?
NTSC/PAL option to change in Rear camera module ?
—> But another strange thing : VCDS can’t access to module 6C « rear camera « .
What can I do to recover access to it ?
thanks
Regards

[willywonkachocfactory]

This looks fantastic and a massive upgrade on RNS510.

Are you still able to kindly point to where I can get all the necessary parts to have this working?

I've got a 2008 MKV GTI, no RVC, no parking sensors

[kamold]

Oké the strange thing is that the offroad menu the think blue trainer and parkpilot menu works fine also the drivingschool functie and mfa info works. Vehicle menu and performance doesn't work. I have update my gateway bc to bl but there is no change. The 3aa A bcm to R.
I think the menu,s are missing som puls.

Performance monitor requires a swap code in mqb.
I don't believe such a thing exists for pq.

Sent from my SM-G960F using Tapatalk