Discover Media retrofit

[MOLNAR]

Change the language in ODIS

I changed but the descriptions for calibration and so are in English 😂

[kamold]

Change the language in ODIS

[MOLNAR]

I can sample data because I do not know where to enter it - I do not know English enough

[kamold]

You need to make the measurements.
Height of camera from ground, height of wheel arch, height of calibration board from ground.

[MOLNAR]

The other parameters you need to enter actual correct data.

the problem is I do not know what are the correct ones - you can write them to me

[kamold]

The other parameters you need to enter actual correct data.

[MOLNAR]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

I did as I wrote and I typed 1400 of the rest of the parameters I left at zero and I do not calibrate. Can you help me what to

[MOLNAR]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

I must first settle vas 5054a and odis software because I do not have it

[kamold]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

[MOLNAR]

Hello colleagues
I am new to the forum and I live in poland
I installed my batch dicsover media 2 in my passat and everything works beautifully. Recently I connected the RVC High camera with the modul 7n0907441B. The camera works but I have a camera calibration error - I did not calibrate it because I do not know how to do it.
I have a calibration mat, but I do not know how to calibrate.
Can someone from my friends tell me how to do it?
I have vcd and vac can pro.
Thank you for your help.

[kamold]

Yes, the first 3 bytes of 5f coding control the vehicle image.
Update your vcds to the current release and it will be in the drop down for coding.

[Delosk8]

I wanted to find out if you know how to change the logo of the car when you put it into reverse?
I have a Passat estate, but when i put the car into reverse it shows an Amarok (donor car). I know it can be done through VCDS and I have got connection via 5F module manualy as it doesn’t appear on gateway list. I don't know which byte and value use to make it display estate/kombi picture. That's actually minimum I would like to achieve... If anyone can help me get it fully coded that would be awesome.
My radio model is 5C0035680E

please see vcds scans attached

full vcds log:

Monday,01,July,2019,22:13:58:01249
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 15.7.1.0
Data version: 20150904
www.Ross-Tech.com




VIN: WVWZZZ3CZEE063712   License Plate: 
Mileage: 90050km-55954mi   Repair Order: 




Chassis Type: 3C (7N0)
Scan: 01 03 08 09 10 15 16 17 19 25 37 42 44 46 4C 4F 52 53 56 61
          62 72 77


VIN: WVWZZZ3CZEE067312   Mileage: 90050km-55954miles


01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Not registered 0001
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
4C-Tire Pressure II -- Status: Not registered 0001
4F-Centr. Electr. II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
56-Radio -- Status: Not registered 0001
61-Battery Regul. -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CFFB)       Labels: 03L-906-018-CFF.clb
   Part No SW: 03L 906 018 PR    HW: 03L 907 309 AE
   Component: R4 2.0l TDI   H28 9979  
   Revision: 41H28---    Serial number: 00000000000000
   Coding: 00190012042501080000
   Shop #: WSC 34555 001 1048576
   ASAM Dataset: EV_ECM20TDI01103L906018PR 003007
   ROD: EV_ECM20TDI01103L906018PR.rod
   VCID: 091E516FA83DA3760A-805C


No fault code found.


Address 10: Park/Steer Assist (J446)       Labels: 3AE-919-475.clb
   Part No SW: 3AE 919 475 C    HW: 7N0 919 475 
   Component: PARKHILFE 8K  H06 0018  
   Revision: --------    Serial number: 28231333400596
   Coding: 108002
   Shop #: WSC 99999 1023 2097151
   ASAM Dataset: EV_EPHVA18VW47X0000 001006
   ROD: EV_EPHVA18VW4280000.rod
   VCID: 3F8A8FB7A6795DC664-806A


No fault code found.


-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels: 3C0-953-569.clb
   Part No SW: 3C9 953 501 DA    HW: 5K0 953 569 BA
   Component: LENKS.MODUL   016 0140  
   Revision: FF010042    Serial number: 20131202200571
   Coding: 1182250000
   Shop #: WSC 00015 115 00001
   ASAM Dataset: EV_VW360SteerWheelUDS A03004
   ROD: EV_VW360SteerWheelUDS.rod
   VCID: 6BD20BE78281116698-803E


   Multi Function Steering Wheel Control Module: 
   Subsystem 1 - Part No SW: 3C8 959 537 D    HW: 3C8 959 537 D
   Component: E221__MFL-TK6  H07 0022 
   Coding: E20000


No fault code found.


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 3C8-920-xxx-17.clb
   Part No SW: 3AA 920 970 N    HW: 3AA 920 970 N
   Component: KOMBI         H04 0811  
   Serial number: 00000000000000
   Coding: 461F01
   Shop #: WSC 05314 115 00001
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04721
   ROD: EV_Kombi_UDS_VDD_RM09_SK35.rod
   VCID: 3E74F2B3A17354CE6F-806A


No fault code found.


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 7N0-907-530-V2.clb
   Part No SW: 7N0 907 530 AM    HW: 7N0 907 530 AM
   Component: J533  Gateway H55 1642  
   Revision:   H55       Serial number: 161013F2000357
   Coding: 462007
   Shop #: WSC 05314 123 00001
   VCID: 7BF23BA7FAE181E608-802E


1 Fault Found:
01044 - Control Module Incorrectly Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 90058 km
                    Time Indication: 0
                    Date: 2019.07.01
                    Time: 22:06:37




-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 3C0-959-433-25.clb
   Part No SW: 3AA 959 433 B    HW: 3AA 959 433 B
   Component:    IMMO         043 0407  
   Revision: 00043000    Serial number: VWZCZ000000000
   Shop #: WSC 131071 1023 2097151
   VCID: 3878E4AB4B576AFEA5-806C


   Subsystem 1 - Part No: 3C0 905 861 J
   Component:    ELV          029 0380
   3C0905861J     ELV          029 0380   


No fault code found.


-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached


-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K0 909 144 R
   Component: EPS_ZFLS Kl. 195    3501  
   Revision: 00H22000    
   Shop #: WSC 02069 000 90108
   VCID: 397EE1AF705D73F65A-806C


No fault code found.


-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 3C0-959-433-46.clb
   Part No SW: 3AA 959 433 B    HW: 3AA 959 433 B
   Component:    KSG PQ47 ELV 043 0645  
   Revision: 00043000    Serial number: VWZCZ000000000
   Coding: 0191020052830E76340494157C085FCE105C04
   Shop #: WSC 05311 000 00001
   VCID: 3878E4AB4B576AFEA5-806C


   Subsystem 1 - Part No: 1K0 951 605 C
   Component: LIN BACKUP HORN H05 1501


   Subsystem 2 - Part No: 3C0 951 171 C
   Component: Neigungssensor  004 0611


   Subsystem 3 - Part No: 3C0 951 171 C
   Component: Innenraumueberw.004 0611


No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached


-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840)       Labels: 1K0-907-534.clb
   Part No SW: 7N0 907 534     HW: 7N0 907 530 AM
   Component: Batt.regelung H55 1642  
   Serial number: 161013F2000357
   Coding: 030F1859
   Shop #: WSC 05314 123 00001
   VCID: 71EE198FA8ADFBB6A2-8024


   Subsystem 1 - Part No SW: 1K0 915 181 H    HW: 1K0 915 181 A
   Component: J367-BDM  H07 0180 


No fault code found.


-------------------------------------------------------------------------------
Address 77: Telephone
Cannot be reached


End-------------------------(Elapsed Time: 03:16)--------------------------

detailed 5F log:

Monday,01,July,2019,22:08:46:01249
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 15.7.1.0
Data version: 20150904
www.Ross-Tech.com




VIN: WVWZZZ3CZEE063712  License Plate: 






--------------------------------------------------------------------------------
--------------------------------------------------------------------------------




                Address 5F: Information Electr.       Labels: None
Control Module Part Number: 5C0 035 680 E    HW: 5C0 035 680 E
  Component and/or Version: MU-S-ND-ER    H31 0359
           Software Coding: 06180701BE00000011111101008808001F0100D4002001004F
            Work Shop Code: WSC 02739 790 50316
              ASAM Dataset: EV_MUStd4CTSAT 001022 (VW46)
                       ROD: EV_MUStd4CTSAT_VW26.rod
                      VCID: 234223C72AD1192660-8076
2 Faults Found:


6714 - Databus 
          U1121 00 [009] - Missing Message
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 54
                    Mileage: 90058 km
                    Date: 2019.07.01
                    Time: 22:06:40


1637 - Interface for External Media 
          U11B8 00 [009] - No Communications
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 54
                    Mileage: 90058 km
                    Date: 2019.07.01
                    Time: 22:06:36

current coding attached

[kamold]

Discover media doesn't support DDP. Only bap. So you need to either upgrade to white/colour cluster or use a fislink to translate between bap and DDP.

[tonci14]

Hello Im doing upgrade from RNS510 to Discover Media on Golf MK5 2009 Variant. After unit install everything seems to work fine, Rear OPS, Steering wheel buttons, climatronic (shows outside temp), time synced from cluster, BUT I cannot get menu on cluster (audio/ navigation even telephone) as I was used to while RNS510 was installed. Now I get only MDF and SETTINGS menu.

Gateway forced me to set Audio, Navigation and Telephone checked in instalation list. in this state I get no ERROR but only on 5F Infotaiment. I have no option for 5F in Instalation List.

Problem I am trying to solve is that I need that menu options and I want to see navigation instructions or actual song name and control telephone..

I have red maxidot as in attached picture

[lunghurts]

Thanks I'll check.