Discover Media retrofit

[kamold]

Discover media doesn't support DDP. Only bap. So you need to either upgrade to white/colour cluster or use a fislink to translate between bap and DDP.

[Delosk8]

I wanted to find out if you know how to change the logo of the car when you put it into reverse?
I have a Passat estate, but when i put the car into reverse it shows an Amarok (donor car). I know it can be done through VCDS and I have got connection via 5F module manualy as it doesn’t appear on gateway list. I don't know which byte and value use to make it display estate/kombi picture. That's actually minimum I would like to achieve... If anyone can help me get it fully coded that would be awesome.
My radio model is 5C0035680E

please see vcds scans attached

full vcds log:

Monday,01,July,2019,22:13:58:01249
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 15.7.1.0
Data version: 20150904
www.Ross-Tech.com




VIN: WVWZZZ3CZEE063712   License Plate: 
Mileage: 90050km-55954mi   Repair Order: 




Chassis Type: 3C (7N0)
Scan: 01 03 08 09 10 15 16 17 19 25 37 42 44 46 4C 4F 52 53 56 61
          62 72 77


VIN: WVWZZZ3CZEE067312   Mileage: 90050km-55954miles


01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Not registered 0001
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
4C-Tire Pressure II -- Status: Not registered 0001
4F-Centr. Electr. II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
56-Radio -- Status: Not registered 0001
61-Battery Regul. -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CFFB)       Labels: 03L-906-018-CFF.clb
   Part No SW: 03L 906 018 PR    HW: 03L 907 309 AE
   Component: R4 2.0l TDI   H28 9979  
   Revision: 41H28---    Serial number: 00000000000000
   Coding: 00190012042501080000
   Shop #: WSC 34555 001 1048576
   ASAM Dataset: EV_ECM20TDI01103L906018PR 003007
   ROD: EV_ECM20TDI01103L906018PR.rod
   VCID: 091E516FA83DA3760A-805C


No fault code found.


Address 10: Park/Steer Assist (J446)       Labels: 3AE-919-475.clb
   Part No SW: 3AE 919 475 C    HW: 7N0 919 475 
   Component: PARKHILFE 8K  H06 0018  
   Revision: --------    Serial number: 28231333400596
   Coding: 108002
   Shop #: WSC 99999 1023 2097151
   ASAM Dataset: EV_EPHVA18VW47X0000 001006
   ROD: EV_EPHVA18VW4280000.rod
   VCID: 3F8A8FB7A6795DC664-806A


No fault code found.


-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels: 3C0-953-569.clb
   Part No SW: 3C9 953 501 DA    HW: 5K0 953 569 BA
   Component: LENKS.MODUL   016 0140  
   Revision: FF010042    Serial number: 20131202200571
   Coding: 1182250000
   Shop #: WSC 00015 115 00001
   ASAM Dataset: EV_VW360SteerWheelUDS A03004
   ROD: EV_VW360SteerWheelUDS.rod
   VCID: 6BD20BE78281116698-803E


   Multi Function Steering Wheel Control Module: 
   Subsystem 1 - Part No SW: 3C8 959 537 D    HW: 3C8 959 537 D
   Component: E221__MFL-TK6  H07 0022 
   Coding: E20000


No fault code found.


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 3C8-920-xxx-17.clb
   Part No SW: 3AA 920 970 N    HW: 3AA 920 970 N
   Component: KOMBI         H04 0811  
   Serial number: 00000000000000
   Coding: 461F01
   Shop #: WSC 05314 115 00001
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04721
   ROD: EV_Kombi_UDS_VDD_RM09_SK35.rod
   VCID: 3E74F2B3A17354CE6F-806A


No fault code found.


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 7N0-907-530-V2.clb
   Part No SW: 7N0 907 530 AM    HW: 7N0 907 530 AM
   Component: J533  Gateway H55 1642  
   Revision:   H55       Serial number: 161013F2000357
   Coding: 462007
   Shop #: WSC 05314 123 00001
   VCID: 7BF23BA7FAE181E608-802E


1 Fault Found:
01044 - Control Module Incorrectly Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 90058 km
                    Time Indication: 0
                    Date: 2019.07.01
                    Time: 22:06:37




-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 3C0-959-433-25.clb
   Part No SW: 3AA 959 433 B    HW: 3AA 959 433 B
   Component:    IMMO         043 0407  
   Revision: 00043000    Serial number: VWZCZ000000000
   Shop #: WSC 131071 1023 2097151
   VCID: 3878E4AB4B576AFEA5-806C


   Subsystem 1 - Part No: 3C0 905 861 J
   Component:    ELV          029 0380
   3C0905861J     ELV          029 0380   


No fault code found.


-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached


-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K0 909 144 R
   Component: EPS_ZFLS Kl. 195    3501  
   Revision: 00H22000    
   Shop #: WSC 02069 000 90108
   VCID: 397EE1AF705D73F65A-806C


No fault code found.


-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 3C0-959-433-46.clb
   Part No SW: 3AA 959 433 B    HW: 3AA 959 433 B
   Component:    KSG PQ47 ELV 043 0645  
   Revision: 00043000    Serial number: VWZCZ000000000
   Coding: 0191020052830E76340494157C085FCE105C04
   Shop #: WSC 05311 000 00001
   VCID: 3878E4AB4B576AFEA5-806C


   Subsystem 1 - Part No: 1K0 951 605 C
   Component: LIN BACKUP HORN H05 1501


   Subsystem 2 - Part No: 3C0 951 171 C
   Component: Neigungssensor  004 0611


   Subsystem 3 - Part No: 3C0 951 171 C
   Component: Innenraumueberw.004 0611


No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached


-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840)       Labels: 1K0-907-534.clb
   Part No SW: 7N0 907 534     HW: 7N0 907 530 AM
   Component: Batt.regelung H55 1642  
   Serial number: 161013F2000357
   Coding: 030F1859
   Shop #: WSC 05314 123 00001
   VCID: 71EE198FA8ADFBB6A2-8024


   Subsystem 1 - Part No SW: 1K0 915 181 H    HW: 1K0 915 181 A
   Component: J367-BDM  H07 0180 


No fault code found.


-------------------------------------------------------------------------------
Address 77: Telephone
Cannot be reached


End-------------------------(Elapsed Time: 03:16)--------------------------

detailed 5F log:

Monday,01,July,2019,22:08:46:01249
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 15.7.1.0
Data version: 20150904
www.Ross-Tech.com




VIN: WVWZZZ3CZEE063712  License Plate: 






--------------------------------------------------------------------------------
--------------------------------------------------------------------------------




                Address 5F: Information Electr.       Labels: None
Control Module Part Number: 5C0 035 680 E    HW: 5C0 035 680 E
  Component and/or Version: MU-S-ND-ER    H31 0359
           Software Coding: 06180701BE00000011111101008808001F0100D4002001004F
            Work Shop Code: WSC 02739 790 50316
              ASAM Dataset: EV_MUStd4CTSAT 001022 (VW46)
                       ROD: EV_MUStd4CTSAT_VW26.rod
                      VCID: 234223C72AD1192660-8076
2 Faults Found:


6714 - Databus 
          U1121 00 [009] - Missing Message
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 54
                    Mileage: 90058 km
                    Date: 2019.07.01
                    Time: 22:06:40


1637 - Interface for External Media 
          U11B8 00 [009] - No Communications
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 54
                    Mileage: 90058 km
                    Date: 2019.07.01
                    Time: 22:06:36

current coding attached

[kamold]

Yes, the first 3 bytes of 5f coding control the vehicle image.
Update your vcds to the current release and it will be in the drop down for coding.

[MOLNAR]

Hello colleagues
I am new to the forum and I live in poland
I installed my batch dicsover media 2 in my passat and everything works beautifully. Recently I connected the RVC High camera with the modul 7n0907441B. The camera works but I have a camera calibration error - I did not calibrate it because I do not know how to do it.
I have a calibration mat, but I do not know how to calibrate.
Can someone from my friends tell me how to do it?
I have vcd and vac can pro.
Thank you for your help.

[kamold]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

[MOLNAR]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

I must first settle vas 5054a and odis software because I do not have it

[MOLNAR]

You need to apply a Tiguan parameter set then use ODIS S to run the calibration routine, using Tiguan 2016 as the vehicle project.
The board needs to be at around 1600mm from rear axle but enter 1400mm as measurement into ODIS.

I did as I wrote and I typed 1400 of the rest of the parameters I left at zero and I do not calibrate. Can you help me what to

[kamold]

The other parameters you need to enter actual correct data.

[MOLNAR]

The other parameters you need to enter actual correct data.

the problem is I do not know what are the correct ones - you can write them to me

[kamold]

You need to make the measurements.
Height of camera from ground, height of wheel arch, height of calibration board from ground.

[MOLNAR]

I can sample data because I do not know where to enter it - I do not know English enough

[kamold]

Change the language in ODIS

[MOLNAR]

Change the language in ODIS

I changed but the descriptions for calibration and so are in English 😂

[kamold]

Google translate is your friend

[MOLNAR]

Google translate is your friend

He gives such values and does not go. Does it need a code to calibrate the camera?