Discover Media retrofit

[kamold]

Mic is mic it works

[aswigon]

Composition Media / RNS510 replacement

Further to this and it may be a really dumb question...

Does anyone know whether I can use the existing installed microphone and wiring or do I need to replace it with the one that came with the Composition? I understand the requirement to use the new cabling for the CarPlay capability but wondering whether the wiring for the microphone is different on that header / connector.

Hoping someone can assist with getting my retrofit working as I am having some issues.

MK6 R which has RNS510 but looking to put Composition Media (5K7035200D) and RVC in.

Struggling to get VCDS to see the Composition etc which I need to program for Dynaudio, bluetooth etc. Is this because my CAN Gateway needs to be upgraded / replaced?
Address 19: CAN Gateway (J533) Labels:. 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 M HW: 1K0 907 951
Component: J533 Gateway H42 1623
Revision: H42 Serial number: 040412F1003660
Coding: 350003
Shop #: WSC 01357 011 00200
VCID: 3A7B84E9B55F9E9ADB-806E

Any help is appreciated.

[kamold]

Not sure what else I can recommend...your RVC module is not detecting a video input.
Seeing as your camera was working with the RNS510 you'd like to think the camera itself is good.
Without another RVC module to rule out your 7N0 RVC module all you're left with is checking all your wiring is correct.

[malsageer]

Hello Kamold I got my harness from the below link and I used it exactly as described by connecting the camera and module!!

VW Wiring loom reversing camera High Line Camera 7N0907441B Camera TIGUAN I, Sharan. VW Kabelsatz Rückfahrkamera High Line Kamera 7N0907441B Camera TIGUAN I, SHARAN. | eBay

Module is also purchased from this:
VW Passat cc Facelift 1.4 TSI Control Unit Rear View Camera Rfk 7N0907441B VW Passat cc Facelift 1.4 TSI Control Unit Rear View Camera Rfk 7N0907441B | eBay

Still black screen for two seconds and then "the parkpilot is currently not available".
Any Idea on how to test the camera itself and how to remove the error messege from 5F module.

I'm sorry to bother you that much but I really spent like a week trying to find a solution but with no luck.

[kamold]

Hello Kamold, Do you know the camera that fits my golf mk6 without using a converter adapter? Passat CC and Golf mk7 sportsvan cameras are compatible, I wonder if you have information about this?

If you are connecting to a Discover Media, then you can use an aftermarket camera like this:
For VW VOLKSWAGEN Golf 6 7 MK7 MK6 Passat CC Polo Flip Logo Emblem Camera Badge Rotating Camera Dynamic Trajectory Line CCD-in Vehicle Camera from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group

[kamold]

Here are the pinout differences:
Discovwer PQ Camera Pinout - Google Sheets

[HKN]

Discover Media retrofit

Hello Kamold, Do you know the camera that fits my golf mk6 without using a converter adapter? Passat CC and Golf mk7 sportsvan cameras are compatible, I wonder if you have information about this?

[malsageer]

gray plug: Camera to module
2 pin plug: camera to module
Brown cable: ground
Red cable: +12v
Orange brown and orange violet cables to CAN-+
White and black cables to MIB pins 6 and 12

The module is having grey, green plugs connected as well as the red big plug with multipin.

[kamold]

Which input do you have your camera plugged into in the RVC module?
It still shows no video input.

[malsageer]

Hey Kamold,

sorry for my late response, it took sometime from me to figure out how to export the adaptation channel map it is HERE. and SA didn't work either for 6C module! it is showing error: "Controller refused the key! Error35: Invalid key"

below is my full auto-scan for your reference
Dropbox - autoscan.pdf - Simplify your life

waiting for your feedback

Thanks.

[kamold]

Try sa 20103 for rvc.
Yes there is adaptation required for park assist.
Take an adaptation channel map and post it.

[malsageer]

cannot code the RVC module, it gives error "coding rejected" does it require any security access or sumtheng to code it?


And what about the problem with 5F module: the parkpilot is currently not available"??
Any adaptation or coding to consider?

[malsageer]

I cannot code the RVC module, it gives error "coding rejected" does it require any security access or sumtheng to code it?

And what about the problem with 5F module: the parkpilot is currently not available"??
Any adaptation or coding to consider?


Sent from my iPhone using Tapatalk

[kamold]

The first 2 bytes of your coding are not documented in VCDS.
But my coding is:
01130608A201000700

Note I am RHD, don't have a flip badge camera or trailer.
I would try changing just your first 2 bytes to 0164 (passat CC) and see if that makes any difference.
But otherwise it looks like the video input to the RVC module is not correct.

[malsageer]

yes the camera is the flip badge type and yes it is opening once reverse without any error.

my car is 4 motion full automatic with VR6 engine.
the fault from 6C control module is below with software version and it came from CC as per the seller from eBay:

Saturday,27,July,2019,14:46:12:53651
VCDS Version: Release 17.1.0 Running on Windows 10 x64
Ross-Tech: Home
Address 6C: Back-up Cam. Labels: 5Q0-907-441.clb
Control Module Part Number: 7N0 907 441 B HW: 7N0 907 441 B
Component and/or Version: VW428 RVC Mid H04 0040
Software Coding: 01730001C301000300
Work Shop Code: WSC 12345 123 12345
ASAM Dataset: EV_CamSysRearPANAVW428 002002 (VW46)
ROD: EV_CamSysRearPANAAU914.rod
VCID: 306F76E56BF2C0C17F-8064
2 Faults Found:
9591825 - Video Signal Line
B125C 11 [009] - Short to Ground
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 185
Mileage: 73438 km
Date: 2072.14.00
Time: 23:00:05
active: waiting for return message
13705536 - Databus
U1121 40 [009] - Missing Message
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 185
Mileage: 73438 km
Date: 2072.14.00
Time: 23:00:09
active: waiting for return message


Thanks a lot for your time and assistance