Originally posted by Transporter
View Post
We have also tried a number of times to read my ECU over the OBD port each time a new update for the various tools comes through. And only last week your Autologic could read my ECU

The major challenges I faced at the time were (and still are):
- Tiguan MED17 ECU was bench tune only
- No tuners in Adelaide have bench tuning tools for the MED17 ECU
- No tuners had stage 2 hardware (DP) for Tiguan
So when Gavin from Custom Code was in Adelaide 18 months ago, I did have him attempt to bench tune my ECU. Unfortunately due to timing of his visit, and the fact that Custom Code had not tuned this particular ECU variant before, this meant that this was not an overnight job. Gavin ended up returning to Brisbane after having taken a read and applying a patch file to allow access to program the ECU over the OBD port.
Gavin was going to send down the programming lead for me to flash over the port, however I was not 100% comfortable doing this. In the unlikely event that anything went wrong and the ECU got bricked, then who would be responsible if I was the one flashing in the file? Also after further discussion with Gavin at Custom Code each hardware upgrade is an additional cost for software so although it is cheaper up front there's ongoing costs. Plus I still needed to get myself a DP and this would be a custom job. Given the ongoing costs for new files from Custom Code (not Gavin), I'd probably be better off to get all hardware first and then have Gavin tune it. Also Gavin wasn't planning to come back to Adelaide anytime soon so it all got too hard and I started looking at other options.
Which is when I started talking to Simon at Viezu about tuning my car and using it as a test-fit vehicle for Viezu Australia hardware range (VAR Design) for the Tiguan... story to be continued
Comment