If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Haven't seen this behavior at all...odd.
Can you just set the clock in the MFD? It should immediately reflect the time change in the Discover Media.
Weird right. Setting the clock in the MFD doesn't change anything on the Discover Media, it looks like it's grabbing the time from the satellites and overriding whatever you set the time on the MFD to. It also impacts the Discover Media navigation, the time to destination etc is all wrong because it thinks the time is always 12:00. Can't seem to find any setting to adjust the time/date?
MY10 Golf Mk6 103TDI DSG Candy White | Revo Stage 1 ECU Tune | 18" Talladegas | GTI Front/Rear/Exhaust | R LED Taillights | GTI Steering Wheel | VW Discover Media | Focal IFVW Front Speakers | Mk7 Climatronic Panel |
OK there is no date/time setting in the Discover like there was in the RNS510. It reads the time off the CAN from the cluster.
Do the steering wheel controls etc work ok?
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC| 2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
OK there is no date/time setting in the Discover like there was in the RNS510. It reads the time off the CAN from the cluster.
Do the steering wheel controls etc work ok?
Hi so i have a headunit from mk7 2013 golf with nav etc. Wondering what model units i can upgrade and fit in there as my current one has an annoying buzz coming from the screen.
You can retrofit an MQB MIB2 unit.
Will also need a new screen (you can use either the 6.5 in or upgrade to 8 inch if you get the surround trim and vents also)
This is from a post from last year. Can you explain about the 6.5 or 8 in screens? It looks like the MIB2 is only 6.5. Why do you say the poster also needed a new screen?
This is from a post from last year. Can you explain about the 6.5 or 8 in screens? It looks like the MIB2 is only 6.5. Why do you say the poster also needed a new screen?
MIB1 screen is lower resolution. If you upgrade to an MIB2 unit you need to install an MIB2 screen either 6.5 or 8 inch. If you upgrade to MIB2.5 you need a 9.2 inch screen
NOTE: these are ONLY applicable to MQB cars.
For earlier PQ platform cars (Golf 5/6, Passat B6/B7, tiguan Mk1 etc) you can only use 2DIN units like the 6.5inch Discover Media, RNS510, after market options etc
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC| 2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
Did you get to the bottom of this and correct the issue of the missing Mhz arounf pg 13 of the post? I have a similar problem for AM radio and interested to see what the fix was.
Did you get to the bottom of this and correct the issue of the missing Mhz arounf pg 13 of the post? I have a similar problem for AM radio and interested to see what the fix was.
Cluster software doesn't support the data being sent to it.
Only fix is to install a newer cluster.
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC| 2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
Thanks, I've also noticed that the auto day night setting doesn't work in the Nav screen either which also gets sent to Carplay nav as well. Otherwise all travelling well.
Should work, as should dimming using the dial for instrument cluster lighting.
I think there might be a setting for it to be turned on and off?
I'll have to check.
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC| 2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
Hello Im doing upgrade from RNS510 to Discover Media on Golf MK5 2009 Variant. After unit install everything seems to work fine, Rear OPS, Steering wheel buttons, climatronic (shows outside temp), time synced from cluster, BUT I cannot get menu on cluster (audio/ navigation even telephone) as I was used to while RNS510 was installed. Now I get only MDF and SETTINGS menu.
Gateway forced me to set Audio, Navigation and Telephone checked in instalation list. in this state I get no ERROR but only on 5F Infotaiment. I have no option for 5F in Instalation List.
Problem I am trying to solve is that I need that menu options and I want to see navigation instructions or actual song name and control telephone..
Tweet
Comment