Mk2 Tiguan VCDS Tweaks

[Guest001]

Learning a bit more with each step but still not showing in the light settings.
Byte 5 isn't shown but I presume it's the light assist box, there are 2 more unlisted boxes under that one do I leave them alone?
Close to giving up but I must be close to activating HBA.
THANKS for your patience.

Get your definitons correct or you will end up well in the s**t if you mix them up

Its BYTE 21 BIT 5 and in mine it goes down to BIT 4 and then it says Light Assist (AFS) Dynamic light assist so tick the second box in that

[Wazza 162]

Get your definitons correct or you will end up well in the s**t if you mix them up

Its BYTE 21 BIT 5 and in mine it goes down to BIT 4 and then it says Light Assist (AFS) Dynamic light assist so tick the second box in that

Mine is the same except High beam assist instead of Dynamic light assist with three boxes, I tick the first box

[Guest001]

Mine is the same except High beam assist instead of Dynamic light assist with three boxes, I tick the first box

Why that one Worked it out as when i click on it it gives the option of HBA

I know If have DLA enabled and so it will bring that up when I tick the box I did

[Wazza 162]

Why that one Worked it out as when i click on it it gives the option of HBA

I know If have DLA enabled and so it will bring that up when I tick the box I did

I'm so close, now have it in my settings and activates on auto lights, stalk pushed forward but comes up Fault light assist in dash centre

[PDMJO]

I'm so close, now have it in my settings and activates on auto lights, stalk pushed forward but comes up Fault light assist in dash centre

I got that same error when I first did it - turns out I'd been counting the bytes from 1, instead of from 0.

i.e. byte 0 starting at the top, not byte 1.

Any chance you made the same mistake I did?

[Wazza 162]

I got that same error when I first did it - turns out I'd been counting the bytes from 1, instead of from 0.

i.e. byte 0 starting at the top, not byte 1.

Any chance you made the same mistake I did?

Maybe only going on hillbillys instructions so I would have thought he would say the byte by number e.g. byte 0 or byte 1 etc

[Guest001]

Maybe only going on hillbillys instructions so I would have thought he would say the byte by number e.g. byte 0 or byte 1 etc

Its as plain as the nose on your face as under the big digits which is the first BIT in the BYTE you are on is the BYTE number you are on.

Top row 00
under that it says BYTE 21 or whatever you have scrolled to

Hexadecimal always starts at 00 AFAIK

You are both getting definitions mixed up which can only lead to confusion

The bottom number is a BYTE which has a certain number of BITS which are the numbers in the top row..

Try to get it right or instructions will be incorrect

While it doesnt quite follow the protocol of 8 bits to a byte it is basically the same thing


Bits and Bytes


Why didnt you just use the APP It works.

If you havent got enough credits Open the program every 24 hours and you get a free credit and if you open 5 ads you end up with 6 credits a day. Ive got 630 ATM for virtually doing nothing.

[Wazza 162]

Its as plain as the nose on your face as under the big digits which is the first BIT in the BYTE you are on is the BYTE number you are on.

Top row 00
under that it says BYTE 21 or whatever you have scrolled to

Hexadecimal always starts at 00 AFAIK

You are both getting definitions mixed up which can only lead to confusion

The bottom number is a BYTE which has a certain number of BITS which are the numbers in the top row..

Try to get it right or instructions will be incorrect

While it doesnt quite follow the protocol of 8 bits to a byte it is basically the same thing


Bits and Bytes


Why didnt you just use the APP It works.

If you havent got enough credits Open the program every 24 hours and you get a free credit and if you open 5 ads you end up with 6 credits a day. Ive got 630 ATM for virtually doing nothing.

Yes l did mix myself up with the message from PDMJO, bit 1 means bit1 etc. Byte numbers bring up the difference pages of bits.
I hope that is right.
I have redone again and all appears to be working except the fault light assist in dash centre comes on when pushing stalk forward
I did originally use the app but had to reverse it as I had no high beam even pulling back the stalk for highbeam flash didn't work.
Where are the ads?
Thanks

[Guest001]

Yes l did mix myself up with the message from PDMJO, bit 1 means bit1 etc. Byte numbers bring up the difference pages of bits.
I hope that is right.
I have redone again and all appears to be working except the fault light assist in dash centre comes on when pushing stalk forward
I did originally use the app but had to reverse it as I had no high beam even pulling back the stalk for highbeam flash didn't work.
Where are the ads?
Thanks

Come on dont you do any research yourself Open the Wallet in the program and play around till you find out how

[dgp]

Hi all, i have an MY20 Tiguan Allspace Highline, S&V, R-Line.
I purchased a Ross-Tech cable and have been making a few changes.
So far i have managed to do the following;

Adaptation changes;
IDE06419-Driving profile switchover
ENG141649-ENG116587-Außenlicht_Blinker-Komfortblinken Blinkzyklen
IDE04159-Deactivation of start-stop function - didn't work
IDE12467-Tubes illustration
IDE05111-Fee-based traffic information (TMC) - yet to confirm if this worked
IDE04158-Activation of start-stop function - this didn't work
IDE06588-Ignition active message: actuator

Long coding changes;
Overtaking right prevention active
Sat Nav initial disclaimer
display volume to be replenished
display acceleration

The one thing that i desperately want to change, is the stop/start function.
Does anyone with a new platform vehicle have a solution for this?
I looked for the temperature method, but couldn't find anything.

latest coding form the car below.

Tried to put in coding but website tells me it is too long.

[dgp]

OK, what am i doing wrong with trying to post my code.
I go advanced, select the #, then paste the code between the [] [].
My code is a full log, 42000 odd characters, is that the issue?

I just did exactly the same thing on the RT Forum, and it accepted my code. Maybe it’s a post count thing.

[AshB]

Ah, I received the new OBDEleven last week, and finally got around to using it last night, made some minor tweaks to get started,

* Enabled TMC traffic, this was working the next morning on my way to the station.
* Disabled startup nag, ah, peace at last.
* Disabled undertake on left prevention, I look forward to never worrying about this again.

Already my life is better.

I'm running on an MY19.5 R-line SWB

I plan on enabling Dynamic Light Assist next, and see if I like the Reduced throttle delay

maybe dynamic roadsign display, though i'm not sure how this is meant to work?

[Guest001]

Ah, I received the new OBDEleven last week, and finally got around to using it last night, made some minor tweaks to get started,


maybe dynamic roadsign display, though i'm not sure how this is meant to work?

Read through the thread its all there and it doesnt work quite as good as it could due to our mapping limitations

[AshB]

Read through the thread its all there and it doesnt work quite as good as it could due to our mapping limitations

That is what I thought. Oo this is the speed sign that appears on the maps, sometimes. I haven't really used the built in maps much, given my area is all new developments, the maps aren't updated often enough to be of much use, so I rely on car play.

[twyat1]

That is what I thought. Oo this is the speed sign that appears on the maps, sometimes. I haven't really used the built in maps much, given my area is all new developments, the maps aren't updated often enough to be of much use, so I rely on car play.

It's works, the speed limits also come up in the display. It's works using the camera not maps.

Sent from my SM-G977B using Tapatalk