Dylan8's Vento

[Silver dub]

Good to see that workbench getting put to get use.

[dylan8]

Good to see that workbench getting put to get use.

Yes yes, working as planned. Remind me to talk about another idea

[waddz]

Thanks!! I'll be down to collect soon.

First of 4 sets of splits I need to start rebuilding for the Vento.
16x8/9 et49 all round.
Staggered lips (.5/1.5) and hex caps (half and full)
Hoping to get a 205/45 and 215/45 under the guards


nice. did you put all the bolts into that chair ha.

[dylan8]

Lol looks like it hey!
Nothing new to update. Trying to split all my wheels for more efficient stacking to make more space in the garage

[dylan8]

Not much. Having a poke around sorting needed and unneeded parts.
Was a small oil leak and water leak under the car. Oil leak is due to the 240k km sump gasket, water leak I don't want to know... but it's super small and seems to be when it's really cold. So time will tell if I have to attend to that.

Alignment Monday.

Being a scene fag mucking around with my hofele ducts and shades

[dylan8]

Bath time

[dylan8]

So my indicators stopped working and I can't work out why.
Right was working, and when I flicked to left both stopped.
Fuses look ok. Hazards work. Brake lights work. Wiring looks ok as far as I can see.
I did read that if the tail light globe holders get a bit crusty they can kill the whole lot?

[HaydEn]

Could be indicator stalk too.

[dylan8]

Could be... I did swap the Vento one back in with no luck. Guess they could both be dead

[Jarred]

SO where is it currently!?

[dylan8]

Still in btown, it'll be in Melbourne within two week

[HaydEn]

Check all the plugs on taillight end. They wreak havoc on the system somehow

[guile]

So my indicators stopped working and I can't work out why.
Right was working, and when I flicked to left both stopped.
Fuses look ok. Hazards work. Brake lights work. Wiring looks ok as far as I can see.
I did read that if the tail light globe holders get a bit crusty they can kill the whole lot?

checked the relay? i guess the hazards wouldn't work if that was the case although they might be on a different circuit. relays were always an issue on my old vw's and audi's. just saying, it could be worth a shot...

[dylan8]

Check all the plugs on taillight end. They wreak havoc on the system somehow

This is what I was reading. Can take the whole system out without blowing fuses etc.
I did check the passenger side and it 'looked' ok, got a second set of lights on the way so that'll be a good way to rule them out.

[dylan8]

checked the relay? i guess the hazards wouldn't work if that was the case although they might be on a different circuit. relays were always an issue on my old vw's and audi's. just saying, it could be worth a shot...

They are on a different relay I think so could be it, I ran out of time to find one matching. I've added it to my list to check next time.