DNS series head unit (new generation dual core RNS-510 alternative)

[dame2010]

Im using new firmware, as they supplied me a couple of days ago.
I have a Passat B6 2005. I made a short video so you guys can see what is going on and maybe advice me.

https://www.dropbox.com/s/mm4rpsk1bo6a7sf/Video%2014.12.14.%2013%2002%2021.mov?dl=0

Also I'm curios are our device have 512MB of ram or they lied about that too,

see the image i took from my device.

[moda]

Im using new firmware, as they supplied me a couple of days ago.
I have a Passat B6 2005. I made a short video so you guys can see what is going on and maybe advice me.

https://www.dropbox.com/s/mm4rpsk1bo6a7sf/Video%2014.12.14.%2013%2002%2021.mov?dl=0

Also I'm curios are our device have 512MB of ram or they lied about that too,

see the image i took from my device.

Looking at your video, the starting thing is very strange and definitely not something i've seen before. It could either be a new bug in the new firmware, or could be your unit? Not sure, never experienced it.

The track names/radio station in the MFD thing is not a new bug, been around for ages. If you turn off RDS it will just show the frequency which is fine enough for me.

Might be worth shooting Audiosources an email with these bugs and the video, it will do more than bitching on a random forum about it.

Re the RAM thing, it has 512mb of RAM, it's just allocated differently, it has ~200mb of RAM allocated/available for the GPS/Navigation application portion, and the rest is allocated for the various other system functions. It's 512mb in total, though.

It's like how on your PC, you may have 16gb of RAM, but windows itself probably uses ~2-6gb just sitting there idling, so applications can only use say 10-14gb.

[dame2010]

Thanks moda for quick response, that make sense.

[moda]

So with the next shipment due to Sandy at the end of this week, who else is going to be playing with swapping over the CANBUS module?

I'll be sure to document how it goes/play guinea pig haha.

Process should be: Unit out -> Change Module -> Reflash -> Profit

Hopefully should be seamless, but we'll see, fun! Will have to grab the latest NEW firmware though, i've only got copies of the one from October *shrugs*

[Goobz]

I want to but as I only have a half MFD I don't have much motivation to other than getting the latest firmwares. I guess I'll see how hard it is first.

[moda]

Hrm yea true, I guess the only benefit for you would be the faster boot times?

From the photos it looks like its only ~8 (?) big solder points, so shouldn't be too hard to swap them over, fingers crossed

[moda]

HK to Brisbane in 1 day haha, woo. I imagine since it's a big shipment it might take a while for it to clear customs, though?

[Goobz]

You can never pick it. Hopefully not!

[lucas__]

these equipos.van the upgrade v43 .....
had 43 opportunities to improve and instead getting worse.
the fault of those who keep buying


v66 ...
v88 ... more of the same

[moda]

these equipos.van the upgrade v43 .....
had 43 opportunities to improve and instead getting worse.
the fault of those who keep buying


v66 ...
v88 ... more of the same

???

I don't understand what you are saying.

[Goobz]

???

I don't understand what you are saying.

Beat me to it. Lol.

[lucas__]

sorry for my bad English
we are in firm Nª 43 and still not fixed anything.
What can we expect?


will continue doing bad attempts

ahora en español:
bamos por la actualizacion v43.....y seguimos esperando que mejore?
es de risa que con tantas no hayan solucionado los errores si no que parese que van a peor.
un equipo que trae salidas RCA y no trae el cable remote es incomprencible.
dos nucleos en wince???....para que estan los sistemas 64 bits?
es normal que la musica desde sd/ usb se corte por llevar el gps al mismo tiempo?
en equipos anteriores con menos de la mitad de potencia no pasa esto.
estos chinos son de pena haciendo cosas asi....la culpa es nuestra por comprarles.

[subieboy]

Hi subieboy,
what year is your car, which navigation system you use.

Hey mate, we use Sygic as per Moda.

[moda]

Sooo the solder points on the canbus module are smaller than I was expecting haha. Gonna be interesting. Waiting on the compatible firmware from sandy first though.

[lucas__]

Does anyone know how to access wince 6 in this dns?