Firmware updates for RNS510 units in Australia/NZ

[Sijalica]

Thanks I'll try

[Sijalica]

Should be able to. Try it and see

Hi,I put the map v.15 but I can't change current position.Do I need upgrade sw from 4020 to 5238.Thanks

[FJ Steve]

Hi,I put the map v.15 but I can't change current position.Do I need upgrade sw from 4020 to 5238.Thanks

Take the car for a drive. The GPS will reset to find the satellites. Takes about 5 - 15 minutes of driving around to do it.

[Sijalica]

Skoda is first been in Holland and map is been West Europa,I put map v.15 East Europa and Navigation always start from current position in Holland but I'm in Bosnia and can't change current position

[Sijalica]

In current position ;sattelite 0/11

[Sijalica]

Why alwayes 0 tracked sattelite,can Kamold some help?

[kamold]

Does the unit show open circuit fault for GPS?


Sent from my SM-G960F using Tapatalk

[Guest001]

Go outside and drive around for a while

[Sijalica]

VCDS say open circuit when I pull out GPS conector but in GPS setup say antena conected when
antena in pleace ,and why gps say 9 or 11 satelite visible but 0 tracked

[Sijalica]

VCDS say open circuit when I pull out GPS conector but in GPS setup say antena conected when
antena in pleace ,and why gps say 9 or 11 satelite visible but 0 tracked[ATTACH=CONFIG]48655[/ATTACH]

Thanks Kamold and everyone,I buy gps antenna and solve problem

[Sijalica]

Can I put this 5238 sw from Kamold for car in Europe

[kamold]

Can I put this 5238 sw from Kamold for car in Europe

No, as it will not leave enough space for EU maps.
Au maps are only 800MB.


Sent from my SM-G960F using Tapatalk

[rakehell]

Just used this thread to recover from corrupted firmware - RNS reverted to German. Huge thank you to kamold for the excellent and detailed instructions!

[therat69]

Good Morning im looking for some help to sort out my. RNS510 fitted in my VW CC 2013 the issue is that every time I get in to the car the unit reboots the specs are
Delivery Part Number 1T0035680L
HW-Version H09
Software Version 5238
map Version 8207
any help would be greatly appreciated
thanks

[kamold]

Try reloading firmware 5238.

Sent from my SM-G960F using Tapatalk