Hey all finding a misfire with my tsi300
P0300 P0301 and P0303
Misfires under idle goes away around 2-3k rpm as a starting point I threw a set of plugs at it nothing still misfiring have moved coilpacks around to find that the misfires haven't moved
Replaced pcv ,next looking at...

I'm after an intake manifold to fit dual webbers to an 8v head.

Was wondering if anyone had any tips on how to get off the air manifold on the AXZ engines (one piece manifold not like the later R36 manifolds) - seem to be some kind of metal pipe running in front of the manifold securing it in place, I think I'v gotten loose all the bolts, but still seem stuck -...

Hello.

The car I have bought recently with 230 000 km under the belt seems to have a lot of issues with the infamous P2015 error code. I also had an issue with the EGR Valve which i replaced and didn't get any more codes regarding that.

I ordered a new intake manifold and...

After some fairly major and expensive repairs this year (see details below), our Caravelle is losing coolant (again), and I don't know where it is going.
It is occasionally blowing white exhaust smoke, I cannot see coolant leaking from anywhere, and it is not going into the engine oil (not milky...

I was changing some sensors on my R36, so decided to remove inlet manifold and change some rocker cover seals too.

I've noticed quite bit of puddle of dripping from the inlet manifold while it was on my bench out the runner? Is this normal?

I've stripped pvc system and changed...

I've done a tonne of reading about decarbonising the inlet on my GTI and was resigned to the fact that the intake manifold would have to come off to do it properly.

Has anyone ever tried this company out? https://carboncleaningaustralia.com/

No intake manifold removal to clean...

stage 3 MPG-MAX Boost Cooler water/meth injection kit

linked here is the exact part number of the kit - Snow Performance 20150 Gasoline Stage 3 MPG MAX Boost Cooler Kit
my kit though has the additional direct port upgrade.

choice of two reservoirs (Snow 3 quart bottle...

Hi All,

Recently bought a 2007 T5 with the 2.0L (AXA) engine.
Pretty bad oil leak so started pulling the inlet manifold to see whats going on seemed to be leaking from the area under there.

Found what can only be described as a hole. Need to pull off the bottom part of...

Hi,
This is my first post. I’ve had a T5 for a year or so.
So far had a cracked exhaust manifold, broken turbo and worn cam and followers. Many more to come.
Patrick

Hi,
Hoping I'm in the right section. I'm after a 1.8 20V naturally aspirated, ADR engine designation, inlet manifold.
Should look like this complete:

what I'm really after is this part off the base of it:

If anyone has one that they can sell, please let me know....

Hey guys so me Mechatronic is posting errors which is causing the engine light to flare up.

I have taken it to get the error codes read and apparently its either a faulty Mechatonic or Solenoid issue.

Essentially when changing from Park to Reverse or the other way, you can...

Hi All,

Got a 2012 Scirocco R. It's currently throwing an error code that the intake manifold is stuck open. Had a carbon cleaning done but it made no difference.

Looked around on various forums and seems this is a common problem with these engines. Most of the USA forums said...

Hi all,

My 2009 Octavia 2.0TDI makes a very loud screeching sound when under power which seems to go away when the engine is at full operating temp. If I stop for a few minutes with engine off, it will do it again briefly and then stop again so the engine doesn't need to be completely cold...

Hi Everyone,
I recently purchased a 2013 Jetta with the 2.0 tsi engine. It seems to be running fairly well but is occasionally throwing up the P2015 error so looks like I am up for a new intake manifold and while its off new injector seals and a valve clean.
The part I need help with is...