What did you do to your Polo today?

[MissVuks]

Rego, insurance & service the week before Christmas sucks more

Soooo know how you feel...

[Plautos]

I try an experience today!

I found a set o TT225 fuel injectors, 0280156063. They are 36lb/h injectors.
The stock injector is the 0280156061 and has 30lb/h.

I spent 20min to remove and assemble the TT injectors in place, and lost another 40min and 3 bolts trying to bolt on the fuel rail!

Ok

What I find out… At low and medium rpm’s the car gets better, I felt improved throttle response, but….. at 5000rpm, when the turbo starts to lose boost, the car get rich and bye bye power… If, maybe, a k04 turbo could feed air at hi rpm’s.

I need upgrades!

[Sharkie]

After extensive testing by APR, Guy was good enough to share the following information a while ago:

.... bigger injectors are not needed by a Polo GTI untill you go to a turbo larger than a K04.

.... you do not need a 4bar FPR untill you go to a K04 and beyond.

.... a N75 "race" valve serves no purpose and will possibly contribute to the surging issues described elsewhere on this forum.

.... chipped only cars will run happily with no issues with no other modifications required unless you want more power .

This may help some of you in making (often poor) decisions when it come to modifications.

Really worthwhile cost effective performance mods (in no particular order) are:

exhaust (ordown pipe and cat)
FMIC
turbo inlet pipe (TIP)
diverter valve (or blow off depending on your preference)
high flow air filter
intake feed modification (commonly a SEAT intake)

[Plautos]

After extensive testing by APR, Guy was good enough to share the following information a while ago:

.... bigger injectors are not needed by a Polo GTI untill you go to a turbo larger than a K04.

.... you do not need a 4bar FPR untill you go to a K04 and beyond.

.... a N75 "race" valve serves no purpose and will possibly contribute to the surging issues described elsewhere on this forum.

.... chipped only cars will run happily with no issues with no other modifications required unless you want more power .

This may help some of you in making (often poor) decisions when it come to modifications.

Really worthwhile cost effective performance mods (in no particular order) are:

exhaust (ordown pipe and cat)
FMIC
turbo inlet pipe (TIP)
diverter valve (or blow off depending on your preference)
high flow air filter
intake feed modification (commonly a SEAT intake)

You are right in almost everything...

The N75 race, solve my surge problem…

And I have fun either in my poor decisions, I’m making and trying it, not buying it ready.

[Bubu]

I just paid my rego too.

But I only got CTP and Rego for 6 months, then in 6 months time I will renew for 1 year so the rego will then be due in July every year rather than January.

Insurance I will get for 1 year so my rego and insurance will never be due at the same time.

I almost forgot the rego and CTP cost $345 for 6 months as opposed to $675 for a year, so it costs a little more but for me its worth it...

[JCM308]

I just paid my rego too.

But I only got CTP and Rego for 6 months, then in 6 months time I will renew for 1 year so the rego will then be due in July every year rather than January.

Insurance I will get for 1 year so my rego and insurance will never be due at the same time.

I almost forgot the rego and CTP cost $345 for 6 months as opposed to $675 for a year, so it costs a little more but for me its worth it...

When did they start offering this in NSW? I know QLD used to do it (poss still do but haven't lived up there for 10 yrs ) but never known NSW to.

[Bubu]

When did they start offering this in NSW? I know QLD used to do it (poss still do but haven't lived up there for 10 yrs ) but never known NSW to.

Not sure. I found out about it in the local newspaper.

It can only be done online.

[RhysQ]

booked it in to get my O2 sensors replaced under warranty....

on a lighter note, last night i bought some more engine mods

[Blitzen]

on a lighter note, last night i bought some more engine mods

What did you get Rhys??

[RhysQ]

What did you get Rhys??

i bought shangwa17's BMC panel filter and SEAT intake hose. he's putting it in the post today so it should be here monday.

[Blitzen]

i bought shangwa17's BMC panel filter and SEAT intake hose. he's putting it in the post today so it should be here monday.

Bugger...Ahh well, I was trying to help a local guy out with these for his Polo, but, I guess he misses out.
I asked him last night, and he said he had got them.
They will help you out in a big way.

[RhysQ]

Bugger...Ahh well, I was trying to help a local guy out with these for his Polo, but, I guess he misses out.
I asked him last night, and he said he had got them.
They will help you out in a big way.

you may need to check with him again because i've already paid. i paid at about 6.30pm last night.

[Blitzen]

you may need to check with him again because i've already paid. i paid at about 7pm last night.

Hahahahaha...like I said, he misses out...You have to be quick when it comes to stuff like this going for that price. Its just like you and me with the Diablo wheels back in october.
The quick and the dead!!

[RhysQ]

Hahahahaha...like I said, he misses out...You have to be quick when it comes to stuff like this going for that price. Its just like you and me with the Diablo wheels back in october.
The quick and the dead!!

yeah you got that right - you bastard!

[Blitzen]

yeah you got that right - you bastard!

Hahahahaha...I'm picking them up on sunday, and they are ready for painting...