If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
heres the link, should work. skip to 1:33 to see the tail lights
thanks GTI JOE for the links, i recon they would look good with the look i got going but im abit turned off by the amount of fidling around it takes to convert to RHD
O/T: I'm in the process of getting a set of 20mm and 15mm spacers atm, 15mm for the front and 20mm for the rear. Thing is i'll have 2 of each size left over so lmk if you're interested
heres the link, should work. skip to 1:33 to see the tail lights
thanks GTI JOE for the links, i recon they would look good with the look i got going but im abit turned off by the amount of fidling around it takes to convert to RHD
O/T: I'm in the process of getting a set of 20mm and 15mm spacers atm, 15mm for the front and 20mm for the rear. Thing is i'll have 2 of each size left over so lmk if you're interested
Oh tru that, as for the spacers, ill have to think about it, ive sorted the clearance issues i was having and got it looking pretty mean with 5mm or so of poke. i think puting 15s on the front would cause me to have rubbing and i really dont want to rise the rear. anyway ill think about it, they sell them in pairs though, how do you have extras?
Hey them LED lights look great. Iv got the black tinted ones but not LED wish I waited now :-/
I also had to take the fog light reflector out coz it was on the wrong side lol.
Okay, seeing as quite a few are interested in rear taillights and what options, here goes...
I've purchased the standard black tails:
So far we've established there are two ways about modding these... swapping for OEM light bulb holder, or modding wires. Nonetheless, fog cover needs to be taken out as on wrong side. OEM quality so fitment is perfect.
Now I've purchased these. Smoked ones, red also available.
They are produced by Eagle Eyes Taiwan. Looks awesome as it matches the OEM Bi-Xenons. Only the parkers are LED, everything else is just stock bulbs. No error as resistor is built inside unit. One thing I noticed is that the instructions indicate there is supposed to be a light panel included, but wasn't as they want us to use our factory one (maybe due to the fact these lights were made for LHD). Also need to pull out fog light lens cover. Fitment maybe about 90-95%, you can tell they aren't factory but unnoticeable close up. I'll have better pics up later.
Also purchased some Dectane "light-bar" LED rear tails. As soon as I receive them I'll post em up. LHD so will need modding too. Smoked purchased, but also available in red.
I've pretty much got all the tails that are available currently, so save yourself the trouble and just fire off any questions in this thread and I'll try to help out! People might say waste of time and money, fair enough!
Cheers,
Eddie
Tat detane site doesn't show any for the polo, is there somewhere else to find them
Cheers
2013 Polo Comfortline 77TSI, Comfort Pack, Pioneer AVIC-F9310BT, Tint, Candy White
1992 Toyota Soarer TT-TL , JZZ30, 1JZ-GTE, Auto, Pearl White, JDM CD/MD, HIDs 42000kms
Removed the red lens reflector from fog light compartment. Then applied red gelatin paper on fog bulb. The heat of the bulb helped to fuse the red gelatin paper giving a perfect red illumination. If gelatin burns away, I will get the bulb red tinted.
Can we have an update on the Dectane ones? Have you managed to install them?
Tweet
Comment