VCDS (VAG-COM) codes and programmable options for Golf Mk7

[DV52]

Here is the Soundakator mod screen shot

Here is the Soundakator mod screen shot

andrew7: Are the instructions for the VCDS tweak as follows?:

To Mute Soundakator

1. A9 Structure Borne Sound
   
2. Adaptation 10
   
3. At Channel drop down choose "Volume of structure borne noiseactuator" (only choice)
   
4. Enter a value in the proper box (0% = mute)

[zloybob]

Zloybob: Russia huh? wow this forum sure does get-about!

I've taken a screen shot below of the Hecadecimal coding string for block 5F (Information Elec. control module) on my car (which has TMC activated). Is this what you are after?

=) thanks, this what I was looking

[andrew7]

andrew7: Are the instructions for the VCDS tweak as follows?:

To Mute Soundakator

1. A9 Structure Borne Sound
   
2. Adaptation 10
   
3. At Channel drop down choose "Volume of structure borne noiseactuator" (only choice)
   
4. Enter a value in the proper box (0% = mute)

^ Correct Don.

This is what I copied off another UK forum:

OK, here it is (courtesy of Golf mk7 FORUM):

Go to:

- A9 Struct. Borne Sound
- Adapation 10
- Select "channel of structure borne sound " (only choice)
- Std value 100% - change to the value you want stored in % (60% has been suggested as a good happy medium, adjust to 0% if you want no noise/mini vibrations).
- "Use change code for change approval"

As above, I am planning on setting volume at 60% which from others who have done this appears a happy compromise (0% would of course = mute)

[DV52]

Sorry man, Australian Golfs don't get the Discover Pro, only some Skodas do so I don't think anyone would know?

readerr0r: It's always good when I don't know stuff because I learn something new! Zloybob didn't answer my question about how the long coding string from my car could be used for his Discover Pro screen. I would have thought that a byte-by-byte comparison of the coding for the two MMIs would be unworkable. Any ideas ?

[readerr0r]

readerr0r: It's always good when I don't know stuff because I learn something new! Zloybob didn't answer my question about how the long coding string from my car could be used for his Discover Pro screen. I would have thought that a byte-by-byte comparison of the coding for the two MMIs would be unworkable. Any ideas ?

Very likely, usually the units come from different brands so there's slight differences between exact coding. I haven't had a chance to do much with Golf 7/Octavia 3 coding yet so I don't have in-depth knowledge. Getting SUNA working on the Octavia's Discover Pro is on my personal to-do though.

Plus the other Octavia coding bits and bobs, laptimer, show speed limit on the colour MFD, DRL off on indicate etc.

[Ryan_R]

Just a shame that there is nowhere to type 1024 into in VCDS for the RNS510 (I looked)

[readerr0r]

Just a shame that there is nowhere to type 1024 into in VCDS for the RNS510 (I looked)

The map disc has the tmc info on it. You'd have to copy the TMC folder from europe disc, figure out where it stores the key and then somehow get it to associate that with the AU map.

[Ryan_R]

Sounds doable

btw when digging around the RNS510 in VCDS I saw a setting described as 'Eject Lock' -wonder if that has anything to do with some of those guys who couldn't eject firmware CDs after botched update attempts.

[DV52]

Just a shame that there is nowhere to type 1024 into in VCDS for the RNS510 (I looked)

Ryan_R:I have zero understanding of the RNS510, but the (now) famous "1024" is equivalent to hexadecimal "400". VCDS seems to use base-16 units a lot. As an uninformed question is there anywhere to add this value?

[Ryan_R]

There are plenty of places where you can type it

[zloybob]

how the long coding string from my car could be used for his Discover Pro screen. I would have thought that a byte-by-byte comparison of the coding for the two MMIs would be unworkable. Any ideas ?

your coding
02730008FF00000011510001000900001F0100960100010247

my coding
02730001FF00000011110001001900001F0100960100010077

changing 19 to 09 activated hidden menu items, but value in adaptations 1024 dont work for Russia =(


btw
02730008FF00000011510001000900001F0100960100010247
changing 01 to 02 will switch skin to GTI look

[readerr0r]

your coding
02730008FF00000011510001000900001F0100960100010247

my coding
02730001FF00000011110001001900001F0100960100010077

changing 19 to 09 activated hidden menu items, but value in adaptations 1024 dont work for Russia =(


btw
02730008FF00000011510001000900001F0100960100010247
changing 01 to 02 will switch skin to GTI look
[ATTACH=CONFIG]9634[/ATTACH]

1024 is the key for Australia only. Is the option to turn on TP disabled or is it just that you're getting zero messages? If the TMC service in Russia isn't free then there's not much you can do without it appearing in new Golfs/Octavias

[DV52]

your coding
02730008FF00000011510001000900001F0100960100010247

my coding
02730001FF00000011110001001900001F0100960100010077

changing 19 to 09 activated hidden menu items, but value in adaptations 1024 dont work for Russia =(

btw
02730008FF00000011510001000900001F0100960100010247
changing 01 to 02 will switch skin to GTI look

Zloybob: Sorry that the coding changes didn't work for you. If you need any more coding strings, just PM me. Given readerr0r's advice, the magic number for enabling TMC in Russia is probably different. As I have said in a previous post, "1024" is equivalent to Hexadecimal "400". If there is any consistency accross countries, this may provide a clue (but I admit that it's not much of a clue) - Good luck.

Thanks for the Skin switch tweak. I saw a similar tweak on stemei.de site. Instructions were:
Adaptation of the Background of the MFA to Carbon Look

1. STG-17 (Instruments)
2. 10 Adaptation
3. Select "Displaydarstellung" channel (which means "Display representation" in English)
4. Change new value to "version 2"

Haven't tried this tweak yet.

[zloybob]

1024 is the key for Australia only. Is the option to turn on TP disabled or is it just that you're getting zero messages? If the TMC service in Russia isn't free then there's not much you can do without it appearing in new Golfs/Octavias

zero messages, btw default value in adaptation was 16

Zloybob: Sorry that the coding changes didn't work for you. If you need any more coding strings, just PM me. Thanks for the Skin switch tweak. I'll try it out in the next few days.

its working, and now i can enable TP, AF, RDS, thnx =)

one more tweak for 5F
change byte 18 value 00 to 03
and u get mini GTI =)

[DV52]

zero messages, btw default value in adaptation was 16


its working, and now i can enable TP, AF, RDS, thnx =)

one more tweak for 5F
change byte 18 value 00 to 03
and u get mini GTI =)

Zloybob: Well done- you are a Russian Genius!!

Btw - is the Temp on your pic correct -0.5 Deg C? That's cold!!