Hello everyone. My passenger electric seat is not working i bought a couple of seats out of an R36 and going to fit them in. My question is, how can i remove the passenger seat i can't get access to the some of the bolts. Any suggestions will be appreciated.

I have an annoying squeak on the passenger side front window that squeaks seemingly in sync with revolutions of the internal mechanism. It only seems to happen in hot weather when something in there expands; it disappears at cooler times and at night. I have sprayed WD 40 in the tracks and it made no...

How to remove chrome trim as shown in the image
...

As in the title I need to replace the speaker for Parking assist

Too much conflicting advice on where it is located

So say remove glovebox to be located behind it

Others say remove the wipers and located under it drivers side

So say you need to...

Partner closed the boot hard yesterday and there was a sound like something breaking. The boot has to be held open now - spring/s and or gas strut/s must be broken or detached. I'm assuming I'll have to remove the boot side panel trim on both sides to access the mechanism? Has anyone got any tips...

Hi, so I'm working on my 2010 golf, 1.4tsi 118kw engine, it's running very rough on idle, and i've replaced everything from sparkplugs, to coils, to intake air regulating flap, oil cooler(coolant mixed with oil but not a headgasket issue) and the turbo, but the problem still remains. I was planning...

Hi, so I'm working on my 2010 golf, 1.4tsi 118kw engine, it's running very rough on idle, and i've replaced everything from sparkplugs, to coils, to intake air regulating flap, oil cooler(coolant mixed with oil but not a headgasket issue) and the turbo, but the problem still remains. I was planning...

I had a little episode the week before last.

Big storm in Sydney - around 30mm in 5 minutes.

45 seconds into a journey the very next day, the digital dash on my MY18 Passat 206TSI started lighting up like a Christmas tree, with various systems failures and warnings. The digital...

The plastic has cracked where the screw holds the top of the interior door pull handle to the trim/door.

Does anyone know how I can remove just the door pull handle (see picture which part I mean) or do I need to remove the entire trim?
https://www.autoinstruct.com.au/wp-conte...

I've still got the original struts and rear shocks and my T6 has 290+k km. It's getting pretty bouncy.

I'm thinking about KYB replacements, I don't need anything fancy, just something OEM equivalent or better.

Questions are as follows:

What's access like...

Remove mudguard screws. They are a 6 point.








The front mounting hole needs to be redrilled. 293mm centres. Measure from bolt hole nearest windscreen.
Check brackets for alignment. Do not tighten.


The lifting...

Hi team,

I've got lucky with a polo developing a sagging headliner cloth and am wanting to replace this myself.

I've already come unstuck (pardon the pun) with removing the side column sections below it and wondered if anyone had a guide they've done on how to remove all...

Long story short, one of the vertical directional fins in my centre air vent has come off the pin on one end. (See photo.) Is there a way to remove the vent without taking the entire console out so I can reattach it?

...

Need to replace my radiator fans on my R36 , not sure the best way to remove it, as space looks restricted don't want to remove stuff if not needed for access.
Any suggestions ?

Has anyone changed the serpentine belt tensioner on a 2012 T5.1 2.0 turbo , mine is rattling and I thought it was just the bearing in the pulley but sadly not .It seems that the actual spring that holds the tensioner has weakened as it wobbles around when idling . I tried my best to remove the whole...