I spent the best part of an hour trying to undo this connection - to no avail. There is obviously a trick to it that doesn't destroy it in the process! Any advice most welcome. (The wires go to the radiator fan that's embedded in the radiator cowling that sits just behind the radiator itself.)...

Hi all, 90TSI manual. Driving around Brisbane in the rain today. Just driving along and the ABS/ESP fault lights come on.
No big puddles, pot holes etc, on the motorway when they come on.
What are the chances that water has got into a connector somewhere? If it dries out, will the fault...

Dear guys,

Greetings from Hungary!

I have a VW New Bettle Cabriolet 1.9 TDI from 2006, and I’m a middle of retrofitting cruise control.
I bought a kit with wires on ebay, my car is in pieces but I can’t find the Black T10e connector where the install manual shows...

Hey guys,
I need some help!

I recently upgraded my Amarok steering wheel to an MFSW from a Jetta (same exact wheel, just with button) I connected the 2 repair wires, illumination works as well as MFD buttons, but nothing on the left side to control radio. Coding was also done in OBD11...

Howdy,

Been looking at headunit, camera and the like upgrades.

All the how to’s I’ve seen suggest the camera from the highline is not compatible because RGB and end plug etc etc so I got looking into this.

I’m pretty sure the camera itself is...

Hi guys,

I wonder if anyone with a 2.5 petrol T4 could help me with this.

I bought a Vag-Com generic cable and installed VCDS to connect to the ECU in my '94 2.5 petrol T4. VCDS could not find the ECU. On tracing the white OBD1 connector it seems to be connected to nothing...

Does anyone know the part number of the connector and/or the repair wire which goes into second fuel pump on the left side of the car?


Don't have access to my car otherwise I'd check myself.


Thanks!

Hey all

I grabbed some leather seats from a 2018 wrecked amarok for a bargain last week. I’m trying to fit them into my 2013 Highline with cloth seats as standard however the electrical connectors are completely different. As standard I have the yellow connector and a small black one....

ABS and TCS lights are on. Looks like I can borrow an OLBII device, where is the connector? I have not downloaded fault codes before and would appreciate any hints pls.

As mentioned - I need a new connector for the power to the ballast from the light. If anyone has a smashed light around and still has the 4 pin connector - Audi VW Skoda all same Connector with white or black. Mine is giving intermittent faults.

Or advise where to buy suitable unit...

My wifes 2012 T5.1 flashed up a brake symbol on the dash a couple of times in the last few weeks , I knew it was close to needing pads at least as the last service it was reported that it would need new pads at the next service . So I ordered some Bremtec Euroline pads from Brakes Direct [EX GSL Rally...

Hi

I need to replace both Precat O2 sensors, look like the left & right are different part numbers

022906262j (0258007075) & 022906262H (0258007351)

is the difference the connector? when I look on line & the Bosch Australia site all seem to...

Hi guys


I'm still having trouble with this so thought I'd start a new thread and share what I've learnt with others on the same mission. Maybe the group intelligence will get it solved...


My goal is to retain the factory camera with dynamic trajectory. If possible......

Hi All.

Wondering if I can get some help identifying a part number or proper description for the T piece connector in the attached picture. I've been to the standard Repco/Autobarn stores, a European auto parts specialist store, a VW mechanical workshop, 4 different wreckers and the Volkswagen...

Hey guys,

I just finished replacing my RNS 510 in my VW Golf with a RCD 330+ and I'm loving it! It is so much more responsive than RNS 510 and it is capable of mirrorlink It's also plug and play, which is awesome .

But I'm having an issue connecting the OEM reverse...