Hi all. Mk6 GTi DSG. 147km. Whining in 1st and 2nd which has been going on for about 1000km so I’ve driven it very gently. Took it to lube mobile, who removed the box and took it to transmissions r us in Perth, and apparently needs bearings replaced and a new clutch. Quoted $6000 all up. $1200...

Hi has anyone replaced the front wheel bearings on their Amarok. My 2014 auto 4 motion is making a hum when cornering right. It could be the road surface or tyres or bearing.
What’s involved in bearing replacement on these. I am ok with working in my vehicles, last wheel bearing I did was...

Hi - I'm looking for anyone who has gearbox shims they'd sell, or maybe knows a workshop that does that may be able to sell me some.

I'm installing a wavetrac in my Polo's O2R, I already had a bearing kit I bought from someone on here so I thought I'd change the bearings while I had the...

Has anybody got any experience with the T5 Transporter FEBEST front wheel bearings or any other aftermarket T5 front wheel bearings?

Hey,

Anyone had any problems with VWR or Eibach springs having some play at full front strut extension? With some light force i can basically move the spring around on the strut when the car is up on jacks or a lift. This is having a knock on effect of them shifting when driving when...

Wondering if anyone has experience of these poly bushings on a t5.1? Good / bad / no difference? Where did you purchase them from?

Story is I just got some new tyres, went to get a wheel alignment and mechanic said wheel alignment would be a waste of time unless I replace bushings and...

Hi. I've had a quick check but can't find any bearings to suit.
I've come across hubs with the bearing in it so is this what I have to do?

Can someone supply me the part number and maybe a link to a vid to give me an idea what to do?
Thank you.
Neil

My 2015 Polo has a rattling type noise when the 1st setting is enabled. It's not the bearings or the fans. Anyone come across this?

DSG 7 speed out of Caddy one with a bearing failure and another with selector fork bearing failure, We have been doing a few of these lately, The selector bearing housing is plastic and goes Brittle, There are two sealed bearings that starve of oil and we replace them with some mods, New dual clutch...

Brand new, never been used. Rifle drilled and for 20mm wrist pins, come with calico coated bearings. I'm after $900 firm on price. Located in Ryde and can post for around $20

...

I'm experimenting with some pretty crazy wheel offsets at the moment. Just wondering what kind of reputation our front wheel bearings (and for that matter the rears too) have for tolerating that kind of thing for a few weeks.

sam

Just want to introduce myself, I rebuild DSG boxes (only the 02E 6 speed)
I have repaired boxes that have a noisy bearing issue. If you have a car with the 02E 6 speed gearbox with noisy bearings I can change them. Cost is considerably cheaper than the dealer! I order the bearings from UK so...

Hey all,

Does anyone in Vic have a pair of front wheel bearings to sell (new or in ok cond)?



Cheers,

J

Can anyone recommend where to get a new pair of strut bearings? My are completely rooted.

Cheers

Friend of mine is looking at buying a MY11 R manual.

Only issue after 2 test drives is a whine coming from the rear when coasting at 60-85km/h. Sounds goes away when throttle is applied.

Thoughts are rear diff, but could be tyres or bearings? Though bearings seems unlikely...