VCDS Tweaks

[Jondalar]

This is what it looks like on my MY18 Alltrack Wolfsburg


Sent from my iPad using Tapatalk

[lenny]

i have it now coming up and configured to 'late'...still think the lights come on too early.....thanks everyone for response

[Goublin]

Yep, I installed VCDS 18.1.0 and tube version is there. Now I have the R Cluster

[ATTACH=CONFIG]32719[/ATTACH]

where do you find this on VCDS?

[DR074]

where do you find this on VCDS?

Hi Mate

From OBDEleven (similar in VCDS)
Control unit: 17 Dash Board > Adaptations > Display depiction: Version 3

Control unit: 17 Dash Board > Adaptations > Tube_version: variant_4

One does the dials and one does the bouncing balls under the Km/h (can't remember which does what), from you picture.

[Goublin]

Hi Mate

From OBDEleven (similar in VCDS)
Control unit: 17 Dash Board > Adaptations > Display depiction: Version 3

Control unit: 17 Dash Board > Adaptations > Tube_version: variant_4

One does the dials and one does the bouncing balls under the Km/h (can't remember which does what), from you picture.

just wonered if any knew a step by step way of doing it on VCDS

[Jap]

Hi Mate

From OBDEleven (similar in VCDS)
Control unit: 17 Dash Board > Adaptations > Display depiction: Version 3 (bouncy balls orange /gold colour)

Control unit: 17 Dash Board > Adaptations > Tube_version: variant_4 (clocks style)

One does the dials and one does the bouncing balls under the Km/h (can't remember which does what), from you picture.

there you go ��

[DR074]

just wonered if any knew a step by step way of doing it on VCDS

Sorry Goublin, not having VCDS, I don't have the step by step, however....

Ross-Tech: VCDS Tour

shows the screens for VCDS.

just assuming from the main screen, the below;
[SELECT]
[17 - DASBOARD]
[ADAPTATION - 10]
[CHANNEL] and look for both Display Depiction and Tube Version.

not sure of the actual channel names in VCDS. Someone with more experience may jump in.

hopefully, this will help.

Dazz

[Goublin]

Sorry Goublin, not having VCDS, I don't have the step by step, however....

Ross-Tech: VCDS Tour

shows the screens for VCDS.

just assuming from the main screen, the below;
[SELECT]
[17 - DASBOARD]
[ADAPTATION - 10]
[CHANNEL] and look for both Display Depiction and Tube Version.

not sure of the actual channel names in VCDS. Someone with more experience may jump in.

hopefully, this will help.

Dazz

thanks Dazz ill give it a go

[Goublin]

Sorry Goublin, not having VCDS, I don't have the step by step, however....

Ross-Tech: VCDS Tour

shows the screens for VCDS.

just assuming from the main screen, the below;
[SELECT]
[17 - DASBOARD]
[ADAPTATION - 10]
[CHANNEL] and look for both Display Depiction and Tube Version.

not sure of the actual channel names in VCDS. Someone with more experience may jump in.

hopefully, this will help.

Dazz

job done worked like a dream, thanks pal

[Jondalar]

I had previously done the R dials: Tube_version: variant_4
This morning I did the Arteon style background: Display depiction: Version 3 this changes the highlights to gold, however the highlights on the central screen are still blue. Does anyone know if there is a way to get them to match?

Thanks,
Karl

[DR074]

only way I know is to do the AID colour mod from NZ_GolfR, and set to Version 4 for Display Depiction. Then you can have it what ever colour you want. 65000 odd different colours. You just have to set all 10 colours for it to work.

There might be another way that i'm not aware of though.

[chopsticle]

Not sure if this has happened to anyone else..
The Passat was @ Werribee VW getting a potential oil leak looked at (seems to be false alarm, phew!).
While there, they claimed there was some directive from VW to update a door controller or something along those lines.

I didn't think anything of it, but since they've done this, the comfort open/close no longer works..
I've checked VCDS 17.8 and it reckons it's all enabled, but nup.. I've tried both remotes and got nada for open/close.

Anyone come across this or have any ideas besides taking it back and complaining? I had to tweak to turn that stuff on in the first place.

[Wynnston]

Not sure if this has happened to anyone else..
The Passat was @ Werribee VW getting a potential oil leak looked at (seems to be false alarm, phew!).
While there, they claimed there was some directive from VW to update a door controller or something along those lines.

I didn't think anything of it, but since they've done this, the comfort open/close no longer works..
I've checked VCDS 17.8 and it reckons it's all enabled, but nup.. I've tried both remotes and got nada for open/close.

Anyone come across this or have any ideas besides taking it back and complaining? I had to tweak to turn that stuff on in the first place.

It sounds lik you just need to run calibration, it can happen after a controller is flashed and reset or the battery is pulled. For each window, put it all the way down, then pull and hold the switch until the window comes to the top, keep it there for a few extra seconds once it's up. Then repeat the same process once more. Once done it should behave itself. If not, take it back to the dealer.

[Passerati]

Anyone in Brisbane (redlands) that would be keen to code my Passat?


Sent from my iPhone using Tapatalk

[Diegothecat]

So I wanted to enable the RGB colour change option for the instrument colours as per post 248 on this page
Mk2 Tiguan VCDS Tweaks

I followed the directions and I seem to only get 1 choice. I can also only select All Areas the Footwell or the Doors. All of the RGB settings are defined and the directions have been followed exactly.

[ATTACH=CONFIG]31931[/ATTACH]
[ATTACH=CONFIG]31932[/ATTACH]

Has anyone had any luck getting it to work with their Passat?

Hey bud did you have any luck on this one?

Its bbecause you havent added any colours into your system, you can add up to 10 from memory.