The Official Mk7 Wheel Thread

[Dutch77]

From the german vw website configurator 19 inch Pretorias in black
[ATTACH=CONFIG]12958[/ATTACH]

I don't mind them in black, but they work better in the standard silver finish IMO.

Cheers [emoji106]

Do you know if 8.5 +45 legal in QLD?

I think technically no as there would be some slight poke on the front - rear should be flush, although we are talking a few mm on a Euro car.. you'd be unlucky to be done. Any lowering that tucked the wheels even a fraction would probably see it safe.

However I'll leave it to the x 8.5 guys to comment further?

[Lemonskin]

Hey Dutch, errybody. Has anyone seen a mk7 on 3SDM 0.05's? Might sound naff but I've always been a fan of those wheels.

[avdo_]

Here you go Dutch, just for you (pics are low quality)

Volk ZE40 have landed by avdo_, on Flickr
Volk ZE40 have landed by avdo_, on Flickr

I've installed the KW DDC as well, but still playing with the ride height so I'll post some pics once all sorted.

[Dutch77]

Here you go Dutch, just for you (pics are low quality)
..
I've installed the KW DDC as well, but still playing with the ride height so I'll post some pics once all sorted.

Looking good, I think. I suspect these wheels will give off different looks depending on the light, guessing they'll pop with sunlight. Therefore I expect more pics. Or I will check it out when I am back in Adelaide.

Look forward to your KW adjustments, I'm guessing you're currently set at something akin to stock height or a touch under in those pics.

[Dutch77]

A forum sponsor is selling the 3SDM 0.05 on the cheap right now so if you're after an old school look then they're worth checking out, although the specs quoted won't be a fit off the shelf:

[ATTACH=CONFIG]12818[/ATTACH]

Hey Dutch, errybody. Has anyone seen a mk7 on 3SDM 0.05's? Might sound naff but I've always been a fan of those wheels.

Geez mate, only a couple of pages back.

I have a bit of love for them as well, they're cool and old school but not something I'd run myself - they're definitely suited to the show/stance scene and I think will only work well on a significantly lowered car, but open to being proven wrong. I have kept an eye out for a while but so far only that rear three quarter view came up.

[Dutch77]

Better post a wheel tonight, let's have another review of Talladegas:

[sergioscirocco]

a couple from revozport sorry if where post in the past...

[avdo_]

Looking good, I think. I suspect these wheels will give off different looks depending on the light, guessing they'll pop with sunlight. Therefore I expect more pics. Or I will check it out when I am back in Adelaide.

Look forward to your KW adjustments, I'm guessing you're currently set at something akin to stock height or a touch under in those pics.

Yeah, that Rays Blue/Grey is something different. I thought that I would have a problem with it but I like it.
With KW, I've set it at highest possible setting and waiting for the springs to settle before making any adjustments (rears are a pain to adjust). Ride quality hasn't suffered much, if at all. Its a bit firmer but put in comfort and you're cruising with no issues at all.
Put it in race mode and its like a go kart, wow what a difference in handling and the car actually turns in like a go kart.

Install was piss easy, took me 4hrs by my self.

So, STOP thinking about it and just do some creative accounting (so that wife doesn't know) and get your self KW DDC.

[Josh84]

Just realised I've never contributed to this thread. This is mine on 19x8.5 OZ Racing Ultraleggeras ET45 in satin black. Lowered on KW DDC. I've ordered new wheels but this is the set-up I am running now.

[tigger73]

Just realised I've never contributed to this thread. This is mine on 19x8.5 OZ Racing Ultraleggeras ET45 in satin black. Lowered on KW DDC. I've ordered new wheels but this is the set-up I am running now.

What??? you're not happy with how this looks

Need some more pics from different angles before you go swapping rims

[Dutch77]

What??? you're not happy with how this looks

Need some more pics from different angles before you go swapping rims

It's ok, Josh may not have contributed himself but I did the job for him a while back.

Agree it's a great set up, be interested to see where this ones going next.

How do you find the ride on the KWs with them wound down low, rub etc? Avdo, I expect a photoshoot of the Rays at this height!

[Dutch77]

MOMO REVENGE - REVISITED
Specs: 19 x 8.5, ET45, weight tbc

[Dutch77]

VW OMANYTS - REVISITED
Specs: 19 x 8.5, ET45, weight tbc (reps)
Other: VWR springs

[donweather]

Just realised I've never contributed to this thread. This is mine on 19x8.5 OZ Racing Ultraleggeras ET45 in satin black. Lowered on KW DDC. I've ordered new wheels but this is the set-up I am running now.

That's a seriously sick paint job also. Opticoat?

[Josh84]

It's ok, Josh may not have contributed himself but I did the job for him a while back.

Agree it's a great set up, be interested to see where this ones going next.

How do you find the ride on the KWs with them wound down low, rub etc? Avdo, I expect a photoshoot of the Rays at this height!

Haha thanks mate. I've ordered a set of custom made ADV1s. It will be about 4 months before I get them. So I'll be running these wheels for a while more.

Avdo's car will look fantastic with the coils and wheels. I too can't wait to see more pics!!

That's a seriously sick paint job also. Opticoat?

Cheers! Yup I used opticoat. Was really painstaking to apply though haha

What??? you're not happy with how this looks

Need some more pics from different angles before you go swapping rims

Haha I love how the OZ's look and it's exactly what I wanted to achieve with a black car. But the wheels have been such a pain to keep clean, a notorious aspect of the Ultraleggeras and the spoke arrangement. , It could be the OCD in me talking though. I have an obscene amount of pics of my car. Lol Will post in the appropriate thread soon.