Kufatec module to permanently disable stop/start system

[Ryan_R]

For those who don't have [access to] VCDS



Coding interface disable start / stop MQB-40019

[Wezza]

Thought i'd resurrect this post.... Can anyone confirm if this works? Can we permanently turn off stop/start?

[Transporter]

It should be working, the Kufatec products are usually reliable.

[Sharkie]

Isn't there a thread somewhere (I'm sure I saw it) where you can VCDS code out the stop-start? Adaptation of something to set operating temps (for the engine) for when the function will and wont work and then setting the threshold high enough that it never kicks in.

Thats free, thus better .....

[Umai Naa!!]

Or unplugging the battery module?

[Wezza]

Anyone have a VCDS cable in Perth or WA that they're willing to let me use/show me how to use? Happy to compensate for time spent

[booba]

Also there are some mk7 vehicles like mine that won't accept the temperature codings. There is an alternative method now where you set battery voltage thresholds. concept is similar, set the low battery threshhold high enough so autostart won't kick in.

[Kachingg]

How to disable Stop/Start the easy way

Hey guys i got this module online delivered from a stockist in melb in 2 days

Just plug it in wait for the l.e.d to go out took about 5 sec with mine then start/stop disabled

To reverse just plug it back in again same procedure

Easy as no longer will start/stop **** me up the wall

cost was $73 auzzie with postage

[SloAu]

Easier solution - Polo 6C GTI: How to Disable Engine Start/Stop - YouTube - it works the same for Golf 7

[DV52]

hmm..........nothing wrong with Kufatec unit, but cheaper solution, without needing to use a diagnostic cable and without the "tell" that appears on the MFD when the car stops (i.e. the dreaded "A" with a slash) HERE

I've been using mine for 2 x years now - never missed once - every time I switch-on the ignition, the SS Auto-kill switch turns off Start Stop and I can re-engage it easily at any time in my journey by simply pressing the SS witch on the console (not that I have ever done this - I reckon SS is the most dangerous thing in the car!)

Don

PS: For those that have an earlier model mk7, the "Voltage method" shown in SloAU video won't be available - instead \, you will need to use the "temperature method" - see HERE

[Kachingg]

hmm..........nothing wrong with Kufatec unit, but cheaper solution, without needing to use a diagnostic cable and without the "tell" that appears on the MFD when the car stops (i.e. the dreaded "A" with a slash) HERE

I've been using mine for 2 x years now - never missed once - every time I switch-on the ignition, the SS Auto-kill switch turns off Start Stop and I can re-engage it easily at any time in my journey by simply pressing the SS witch on the console (not that I have ever done this - I reckon SS is the most dangerous thing in the car!)

Don

PS: For those that have an earlier model mk7, the "Voltage method" shown in SloAU video won't be available - instead \, you will need to use the "temperature method" - see HERE

Uuuhh i fail to see how that is in any way easier? yes i have the vry small a with a slash pop up but it also took less than 30sec of my time ok it cost 70 bucks(cost saving over your method if you add in hrs minimal) but it is also reversible in the same amount of time, is your hard wired mod that easy?

[DV52]

Uuuhh i fail to see how that is in any way easier? yes i have the vry small a with a slash pop up but it also took less than 30sec of my time ok it cost 70 bucks(cost saving over your method if you add in hrs minimal) but it is also reversible in the same amount of time, is your hard wired mod that easy?

Kachingg: neh, not difficult at all. Plus I get the chance to warm-up my soldering iron and rip-open the center console. Can't get any better fun than that!!!

Don

[Eaglehawk]

Some people just don't appreciate good engineering when they see it

(I love your solution, it's the way the car should have been made!) - But I'm sure some stupid ADR rule made it "illegal". (fuel consumption?)

[Kachingg]

Some people just don't appreciate good engineering when they see it

(I love your solution, it's the way the car should have been made!) - But I'm sure some stupid ADR rule made it "illegal". (fuel consumption?)

Oh dont get me wrong i appreciate what he has done i would not be able to that at all (blessed with 10 thumbs)
It's just that i dispute the easier part taking apart console and soldering bits into the wiring is imo not easier or quicker than a 15 to 30 sec plug and play system... even if i have to live with the vry small a with slash (which i do not even notice on digital dash unless i look for it)

Also if necessary i can undo change in same time for any dealer related warranty issues ect then reinstall after so yeah i like my solution better does not make the complex system bad i am impressed with it and the knowhow that has gone into it but its not for me

[Kachingg]

Update on the kufatech module
Took car to dealer for 1000km check up took me about 1 min to enable start/stop and another 1 min to get rid of it again when home again
Highly recommend this item works like a charm