What have you done to your mk4 (golf/bora) today?

[Driven Threads]

Detailed interior.

Took out rear seat again () for an upcoming track day. Man it weighs a tonne!

[Manaz]

Man it weighs a tonne!

You able to provide a weight estimate (perhaps hold it when standing on bathroom scales)?

Curious if I should bother removing mine when I eventually get the car to the drags (I have the TST rear brace to keep the rear of the car stiff).

[Driven Threads]

You able to provide a weight estimate (perhaps hold it when standing on bathroom scales)?

Curious if I should bother removing mine when I eventually get the car to the drags (I have the TST rear brace to keep the rear of the car stiff).

I used bathroom scales. With me holding, etc..

The large seat back (the one that the middle seat belt is connected to) (roughly 16kg)

The small seat back (roughly 6kg)

So when you combine that with the two rear seat bottoms plus the 3 head rests, its a fair saving.

I run a unibrace, so the rear is nice and firm.

I'm comtemplating removing the front passenger seat aswell. Just for fun!

Hopefully my 17inch track wheels arrive before the track day too!

[stotto]

Started to attack the new stereo today. Thought I would of got a bit more done but the mk4 is much harder then my old mk3. hopefully finish up tomorrow arvo.

[graeme86]

Don't forget to offset those door speaker spacers a bit to actually match the door trim grills - they dont line up directly on the stock speakers if you look (in case you haven't noticed not doing a Mk IV before).

[stotto]

Don't forget to offset those door speaker spacers a bit to actually match the door trim grills - they dont line up directly on the stock speakers if you look (in case you haven't noticed not doing a Mk IV before).

Thank you for the info. I have not noticed that it done that. Do you happen to remember what way they need to be offset ?. Ill have to hold the door trim over it tomorrow and have a look.

[graeme86]

The centre of the door trim is lower down than the centre of the actual speaker cone...maybe about 2 - 3 cm.

Would maybe only be an issue if you are putting larger cone replacement speakers in.

[kaneda]

Stored the GTi in the garage and welded on some extra bracing on the door to get ready for Yasi .................

[Rybky]

Stored the GTi in the garage and welded on some extra bracing on the door to get ready for Yasi .................

Stay safe up there.

Adam

[Mr. JLT]

got the R all packed in the garage--If ***** hits the fan it will get parted..

[kaneda]

got the R all packed in the garage

Must be Beer time seeing everything is sorted ;P

[dylan8]

Stay safe up there guys!!

Booked my car in for a 160,000km service... sigh.
Got a full white LED kit from 42 Draft Designs via Greg Roles. Thanks Greg!
White LED licence plate lights on the way.

[Mr. JLT]

Stay safe up there guys!!

Booked my car in for a 160,000km service... sigh.
Got a full white LED kit from 42 Draft Designs via Greg Roles. Thanks Greg!
White LED licence plate lights on the way.

Time for some cold beers and steak on the barbie before the rain starts again.

[dainese]

Take care guys

[audi-tone]

Fitted some r32 vents i picked up for a good price.. look awesome.
if anyone needs standard vents cheap, feel free to pm me