Tweet
Being cute with the newest black bora on the block
-
-
new springs and shocks today plus put the heat sink in for my ICM after installing The HPS cold air induction!
For pics see rizz"s build thread.
cheers guys!
Comment
-
Looking good mate, ever thought about putting some black vinyl on the b-pillars?Originally posted by rizzla View Postnew springs and shocks today plus put the heat sink in for my ICM after installing The HPS cold air induction!
For pics see rizz"s build thread.
cheers guys!
[ATTACH=CONFIG]7631[/ATTACH]Comment
-
Looks quite similar to my bora right nowOriginally posted by dylan8 View Post
Black, sunroof, p plates, lowered with 7 spoke 16" stockies. #Basics
Only missing the oettinger bits and pieces.
Bonnet has no cut-out for the big VW badge. Is that something aftermarket?Originally posted by MightyCarMods
-| "Laura" - 2001 Bora 4-motion (now sold) |-
Comment
-
-
Looks tough but costly mod
Originally posted by MightyCarMods
-| "Laura" - 2001 Bora 4-motion (now sold) |-
Comment
-
Thank you manOriginally posted by theOctopus View PostCheck the pipe under the intake manifold as well as the vac lines, I along with many others have blown holes in them.
Ive replaced mine with fuel line to stop it happening again and they allow you to tighten the crap out of them
Sent from my GT-N7105 using Tapatalk ill check that out asap, also realized my new boost gauge is out of calibration and sits in about 1.5hg when the car is off. Tried fixing it by carefully knocking the brass circle inside, the pin would bounce up but didnt wanna stay on Zero.
Finally ordered the CPU heatsink too, Seeing Rizzla's thread reminded me of itComment
-
No worries, watch the dipstick tube when checking or tightening the center pipe under the manifold, I slipped and broke mine lol lucky I had a spare.Originally posted by SLAJ View PostThank you man ill check that out asap, also realized my new boost gauge is out of calibration and sits in about 1.5hg when the car is off. Tried fixing it by carefully knocking the brass circle inside, the pin would bounce up but didnt wanna stay on Zero.
Finally ordered the CPU heatsink too, Seeing Rizzla's thread reminded me of it
Sent from my GT-N7105 using TapatalkThe daily
White 2001 Mk4 GTI
GIAC stage 1 - ECS stage 1 clutch & 14lbs Flywheel - 42Draft/Remus Exhaust - APR R1 dv - N75J - K&NComment
-
Is your boost gauge 'new south' ? I haven't had the best experience with them. My boost gauge reads about 2psi under and my oil pressure gauge just does what ever it feels like. Wish I could find some better quality gauges that match the dash lightsOriginally posted by SLAJ View PostThank you man ill check that out asap, also realized my new boost gauge is out of calibration and sits in about 1.5hg when the car is off. Tried fixing it by carefully knocking the brass circle inside, the pin would bounce up but didnt wanna stay on Zero.
Finally ordered the CPU heatsink too, Seeing Rizzla's thread reminded me of itComment
-
Yeah, i had a Defi in there which i loved, but same deal here, got the Newsouth purely for the colour match.Originally posted by Lito View Post
I asked newsouth if there is anything i can do to fix it myself or to get a replacement and both options will leave me out of pocket and without a gauge for who knows how long.Comment
-
-
Sent the ECU in for the mod
Sent from my iPhone using TapatalkComment
-
ECU returned!!!! And all I can say is.... GIDDYUP!
So happy with the extra punch it just hums!!
Sent from my iPhone using TapatalkComment
-
i got my new 25MM eibach rear sway bar hoping to put it in on my next day day off should make the car a bit less boatish to drive
Comment
-
Rsb has been one of my favourite mods, I think you will enjoy it. I decided to see how the plastidip metalisers look. Not too bad me thinksOriginally posted by aaron001au View Posti got my new 25MM eibach rear sway bar hoping to put it in on my next day day off should make the car a bit less boatish to drive
Comment
Comment