Discover Media retrofit

[Simo]

For ops image on the screen you need to update to a newer park assist module.
Mentioned in my writeup I think? 1k8 module. It needs a wiring harness adapter as the pinout changed.
You can use a golf 7 module and reflash it with Passat CC firmware and parameter set.

Yeah, you did mention it - I thought this might have been just for the overlay on the camera image, which I don't have.

Steering column lock error needs a wiring change in the steering column wiring loom.
Need to check my notes and get the details.
Bit of a pain you need to kind of lie upside down in the footwell but not too bad. Just need to bridge 2 wires from memory.

I saw you did this in your Kamold's R36 thread, but doesn't this also involve an update to the CCM, or can you just bridge the wiring? Some other posts also indicate a CCM update is required.

Alternatively, now that the unit has been coded to the car with the new Gateway - what do you think would happen if I swapped it back to the 3C0 Gateway? Would it still work?

[kamold]

Great write-up Kamold - I followed it to the letter for my Composition Media install, and it all works a charm.

Except I can't seem to figure out the following:

1. Parking distance works, but I'm not getting an image on the screen, just the beeps when I'm near an object. Anything that looks like the right coding to enable it does nothing - have I missed something?
2. I have the dreaded "Steering column lock! Visit workshop!" warning on the MFD (and the steering wheel will not lock when parked), due to the 7N0 Gateway being incompatible steering lock - do I need to upgrade the steering lock, or is there a different solution?

Any ideas?

Sunday,06,May,2018,15:02:33:38493
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com
Chassis Type: 3C-VW46 (7N0)
Scan: 01 02 03 08 09 10 15 16 17 19 22 25 36 42 44 46 47 52 53 55
          5F 62 65 72

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 5K7 035 200 D    HW: 5K7 035 200 D
   Component: MU-S--ER      H22 0245  
   Serial number: VWZAZ2R8010691
   Coding: 028401000000000011110003001828001F0100C60020010002
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CTSAT 001022
   ROD: EV_MUStd4CTSAT_VW27.rod
   VCID: 256F1EC924775B6C4B-8070

For ops image on the screen you need to update to a newer park assist module.
Mentioned in my writeup I think? 1k8 module. It needs a wiring harness adapter as the pinout changed.
You can use a golf 7 module and reflash it with Passat CC firmware and parameter set.

Steering column lock error needs a wiring change in the steering column wiring loom.
Need to check my notes and get the details.
Bit of a pain you need to kind of lie upside down in the footwell but not too bad. Just need to bridge 2 wires from memory.

Sent from my HTC 10 using Tapatalk

[Simo]

Great write-up Kamold - I followed it to the letter for my Composition Media install, and it all works a charm.

Except I can't seem to figure out the following:

1. Parking distance works, but I'm not getting an image on the screen, just the beeps when I'm near an object. Anything that looks like the right coding to enable it does nothing - have I missed something?
2. I have the dreaded "Steering column lock! Visit workshop!" warning on the MFD (and the steering wheel will not lock when parked), due to the 7N0 Gateway being incompatible steering lock - do I need to upgrade the steering lock, or is there a different solution?

Any ideas?

Sunday,06,May,2018,15:02:33:38493
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com
Chassis Type: 3C-VW46 (7N0)
Scan: 01 02 03 08 09 10 15 16 17 19 22 25 36 42 44 46 47 52 53 55
          5F 62 65 72

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 5K7 035 200 D    HW: 5K7 035 200 D
   Component: MU-S--ER      H22 0245  
   Serial number: VWZAZ2R8010691
   Coding: 028401000000000011110003001828001F0100C60020010002
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CTSAT 001022
   ROD: EV_MUStd4CTSAT_VW27.rod
   VCID: 256F1EC924775B6C4B-8070

[kamold]

Hi so i have a headunit from mk7 2013 golf with nav etc. Wondering what model units i can upgrade and fit in there as my current one has an annoying buzz coming from the screen.

You can retrofit an MQB MIB2 unit.
Will also need a new screen (you can use either the 6.5 in or upgrade to 8 inch if you get the surround trim and vents also)

Sent from my HTC 10 using Tapatalk

[Clinton]

Hi so i have a headunit from mk7 2013 golf with nav etc. Wondering what model units i can upgrade and fit in there as my current one has an annoying buzz coming from the screen.