Firmware updates for European RNS510 units

[jamerson]

after i imported the PersonalPOi it told me succecefully imported, but when i go and back it ask agai to import them,
when i go to navigate i dont see POI and also can't find POI on System/Map/POI

4020 sees PersonalPOI.DB3 allow to import them but not to selecte them ( so not working)
3810 doesnt see PersonalPOI.DB3 neither EDP/POI.db3( so dont know which formate does it read)
conculusion both are not working for POI unless devoloper can advise

[andreas73]

I installed fw 4020 original and the 4020 with 90/5/5 partitions with success in my RNS B but couldn't install the maps because there is no space in HDD. Then I tryed the 75/20/5 one but the iso could not load (DVD-error). I have use different media, burners, MacOS X, Windows 7, downgrade option, reset memory, downgrade to 2760 but no luck. Then I tryed the new one jamerson upload but there is no new partition map in there. Can someone upload a good 75/20/5 iso (like the 90/5/5 with VIM enabled) please. Thank you

[Chipsy]

Hello !

I read the whole thread but finally I am a little bit confused:

- Sometimes you are revering to a partition of 75/20/5
- Sometimes 90/5/5

I installed at my (C8 /C9) Navi the 4020 from the first post, but partition did not change; I have 18GB space for Music...
...as far as I know I should have a 40GB HDD (or only 30?), anyhow this is a little bit less (or more cal. with 30GB) than 50% !??

How big is your space for music?
and
Am I allowed to install the 90/5/5 Firmware in Europe??

Greetings
Roger

[kundatra]

I think, that 4020 for Unite A/B/C doesn't change size of partitions to 75/20/5, there is something wrong.
I had version 2760, I upgraded to 4020, partition size stays 20MB/10GB. All the data remains unchanged on HDD. After downgrade to 3810 the partition was resized to 15/7.5/7.5GB, no data were found on the HDD - all was deleted. Then i upgraded back to 4020, partition size stays 15/7.5/7.5GB.
I think, in 4020 is missing a procedure for resizing of partitions.
Original version 4020 doesn't have this procedure too. There is this warning: "This upgrade will not create the new partitions required for the new POI system if you upgrade from 1xxx/2xxx. Upgrading from 3800-3910 is required so the new partitions are created."

---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------

One question: I downloaded this image from the very first post:
Firmware 40xx - Link (thanks to jamerson) [URL="https://rapidshare.com/files/1195943676/ISO9660.rar"[/url]
I opened the file version.txt in this ISO, there stands:
#VwSwIndex:3810/3816/3810/3818/3814/3810/3810
So: Is this FW 4020 image or 3810 image file?

[kamold]

Sounds like I will have to have the ISOs created as maybe they were not built correctly. I thought that the previous instructions were clear but maybe they weren't...

European maps are too large, you cannot use 90/5/5 ratios as there will not be enough room for the map data.

[andreas73]

Sounds like I will have to have the ISOs created as maybe they were not built correctly. I thought that the previous instructions were clear but maybe they weren't...

European maps are too large, you cannot use 90/5/5 ratios as there will not be enough room for the map data.

Please Kamold make a new iso with correct 75/20/5 partition and VIM for European users. Thank you

[kundatra]

Yes Kamold, please ....
I think, there is a little misunderstanding on the first page of this thread.

Post Nr. 10:
Europe 3810 you can download ready ISO

https://rapidshare.com/files/1195943676/ISO9660.rar

4XXX is coming soon

Post Nr. 1
Firmware 40xx - Link (thanks to jamerson)

https://rapidshare.com/files/1195943676/ISO9660.rar

So both links are identical, what is correct now?

[kamold]

OK first post updated with a new link for 402x firmware for older units. Has 75/20/5 partition ratios.
Will make and upload the other ISO soon.

[andreas73]

OK first post updated with a new link for 402x firmware for older units. Has 75/20/5 partition ratios.
Will make and upload the other ISO soon.

Simply the best
Thank you!!!

[kamold]

Upload failed, have to try again...missing megaupload...

[kundatra]

Thank you Kamold!!!
The first modified firmware you posted a short while ago is intended for the A unit version, but can be used in B and new unit versions, am I right?

[kamold]

Yes it can, however I am uploading also the standard 402x firmware for C unit and later units that has VIM, secret menu and 70/20/5 partition ratios.
It will take a while so won't be available until tomorrow my time. I will update the link in first post once it is uploaded.

[Capy]

Hi,

I've uploaded the ISO with the European version here:

https://docs.google.com/file/d/0ByTpaBJxxQsBY1RJNVBXajB6OEE/edit

It works fine. It's the version I've installed.


Regards!

[jamerson]

I installed fw 4020 original and the 4020 with 90/5/5 partitions with success in my RNS B but couldn't install the maps because there is no space in HDD. Then I tryed the 75/20/5 one but the iso could not load (DVD-error). I have use different media, burners, MacOS X, Windows 7, downgrade option, reset memory, downgrade to 2760 but no luck. Then I tryed the new one jamerson upload but there is no new partition map in there. Can someone upload a good 75/20/5 iso (like the 90/5/5 with VIM enabled) please. Thank you

Hey Andreas,
if you are EU user and your Device B or C use this FW

https://rapidshare.com/files/4007138782/4020a_B_.rar

if not please provide more information and we will help you
i already pm Kemold it wrong file on the first post he will edite it soon

Hi,

I've uploaded the ISO with the European version here:

https://docs.google.com/file/d/0ByTpaBJxxQsBY1RJNVBXajB6OEE/edit

It works fine. It's the version I've installed.


Regards!

are you able to get your EU POI Working with this FW?

[kamold]

The links are correct, not sure what you are referring to Jamerson? I just checked the link again.
Links now available for all units.