Firmware updates for RNS510 units in Australia/NZ

[tonymy01]

Re: Firmware updates for RNS510 units in Australia/NZ

One with quotes is to the included previous post

You are lecturing me about forum etiquette, but you have done a full quote without trimming up there in the thread. I am posting from my phone, far easier to reply with no quote, than to reply with a massive block of quoted text with most of it not relevant to the comment (and then wrestle with selecting to try to trim without breaking quote, easier from Tapatalk, very difficult from the lousy mobile web interface). Retract your dig at me and I will retract mine at you. Please.


Sent from my GT-N7105 using Tapatalk 2

[Guest001]

You are lecturing me about forum etiquette, but you have done a full quote without trimming up there in the thread. I am posting from my phone, far easier to reply with no quote, than to reply with a massive block of quoted text with most of it not relevant to the comment (and then wrestle with selecting to try to trim without breaking quote, easier from Tapatalk, very difficult from the lousy mobile web interface). Retract your dig at me and I will retract mine at you. Please.
Sent from my GT-N7105 using Tapatalk 2

Wasnt lecturing or having a dig, just stating why the wrong assumption was taken. Sorry you are offended, as was I a little bit

[Transporter]

Re: Firmware updates for RNS510 units in Australia/NZ

I guess no harm done.


Sent from my GT-N7000 using Tapatalk 2

[omega31]

OK, after today’s battery drama and my misspelling causing some fun and games can someone please explain why:

1. Skoda 2011 MY12 had a battery drain after 4120 upgrade.

2. SO far, Battery is ok but running the gateway 'Fix for old CAN gateways' the Volume control is now not working on the steering wheel.

Possible need some VCDS programing which I have never done or have any equipment to do it.

Should I downgrade to firmware 4020 or 38XX ? , I am just worried my battery will drain again and will need to update the gateway with the steering wheel volume not working.

What do you more experience members think ?

[tonymy01]

does any of the RNS stuff show up in the MFD? e.g Navigation, phonebook.
If not, then you may need to go into the can gateway and tick that you have the rns, or look at other gateway options.
There are certainly options for the radio/ navigation module in vcds for steering buttons, maybe you need to check all the vcds navigation options again.

[omega31]

does any of the RNS stuff show up in the MFD? e.g Navigation, phonebook.
If not, then you may need to go into the can gateway and tick that you have the rns, or look at other gateway options.
There are certainly options for the radio/ navigation module in vcds for steering buttons, maybe you need to check all the vcds navigation options again.

Yes, MFD displays it all. phone, radio etc just like pre update. All steering wheel buttons work including radio channel change . The only one that has stopped is volume down/up.

Unfortunately I do not have a vcds cable and might need to get one but as I don't have any experience I might break something else

[kamold]

Re: Firmware updates for RNS510 units in Australia/NZ

Its not likely that the battery went flat due to the old canbus issue. You should have a canbus gateway module which is not affected by that issue.

You may have another problem. That's not to say the headunit cant have drained the battery but you will need to do some testing to determine what the cause is.

You can test the draw across the battery terminals with a multimeter while car is off and radio on and then lock the car and wait 45 mins and test the draw again, listening to the headunit to hear if the fan has shut down. Even better would be to test the draw across the fuse for the headunit circuit in the fusebox.
The rns should shut down and draw next to nothing. In standby the fan still runs for 30mins.

As for the volume buttons not working I would load the proper firmware again (the battery drain fix CD swaps some tables over and forces them to load) and get a fellow forum member to validate the coding of your canbus gateway and rns.

Sent from my HTC One X using Tapatalk 2

[omega31]

Its not likely that the battery went flat due to the old canbus issue. You should have a canbus gateway module which is not affected by that issue.

You may have another problem. That's not to say the headunit cant have drained the battery but you will need to do some testing to determine what the cause is.

You can test the draw across the battery terminals with a multimeter while car is off and radio on and then lock the car and wait 45 mins and test the draw again, listening to the headunit to hear if the fan has shut down. Even better would be to test the draw across the fuse for the headunit circuit in the fusebox.
The rns should shut down and draw next to nothing. In standby the fan still runs for 30mins.

As for the volume buttons not working I would load the proper firmware again (the battery drain fix CD swaps some tables over and forces them to load) and get a fellow forum member to validate the coding of your canbus gateway and rns.

Sent from my HTC One X using Tapatalk 2

Thanks,

If this is the case the only thing I can think of is the upgrade itself actually drained the battery, will have to run an update again taking the risk of draining the battery. but will have to get a multimeter first to test.

Any South Eastern Suburbs VCDS owners that can have a quick look, I can also meet at another location . maybe its a quick fix ? I need to go to the dealer anyways and might have them have a quick look but don't think they will be very happy I upgraded the system.

[jazdog7]

Hi Guys, I have a specific problem with my RNS-510 which I will try to give as much detail about in order to get some answers. I have looked for days through the internet, all to no avail...

I have a factory installed RNS510 (1T0 035 680 A). I transferred approximately 6GB of music when I first got the car via an SD card with no problems at all (other then it being extremely slow).

After a while I decided I wanted to upgrade the maps and at the same time decided to do the firmware.

I ended up upgrading the unit to Firmware Version 2660 and V5 maps, all again with no problems. Everything worked fine, although I did find it very weird that none of my songs were deleted...

The problem that has only now arisen is that i can no longer transfer/copy songs from an SD card or a CD. The SD card is in the correct Fat32 format and i am trasnferring songs in MP3 format. The songs all play fine when they are inserted in the slot, although when i hit "copy" the little "copying" message comes up for about half a second and then disappears and nothing is transfer onto the harddrive. I have tried transferring whole folders and single songs but nothing will work. I ahve also tried burning MP3's to a CD and transferring them this way, but this still did not work.

Any ideas? Should i delete everything off the harddrive and try from scratch? should i re-install the firmware?

Any ideas would be greatly appreciated.

Cheers.

[omega31]

Hi Guys, I have a specific problem with my RNS-510 which I will try to give as much detail about in order to get some answers. I have looked for days through the internet, all to no avail...

I have a factory installed RNS510 (1T0 035 680 A). I transferred approximately 6GB of music when I first got the car via an SD card with no problems at all (other then it being extremely slow).

After a while I decided I wanted to upgrade the maps and at the same time decided to do the firmware.

I ended up upgrading the unit to Firmware Version 2660 and V5 maps, all again with no problems. Everything worked fine, although I did find it very weird that none of my songs were deleted...

The problem that has only now arisen is that i can no longer transfer/copy songs from an SD card or a CD. The SD card is in the correct Fat32 format and i am trasnferring songs in MP3 format. The songs all play fine when they are inserted in the slot, although when i hit "copy" the little "copying" message comes up for about half a second and then disappears and nothing is transfer onto the harddrive. I have tried transferring whole folders and single songs but nothing will work. I ahve also tried burning MP3's to a CD and transferring them this way, but this still did not work.

Any ideas? Should i delete everything off the harddrive and try from scratch? should i re-install the firmware?

Any ideas would be greatly appreciated.

Cheers.

6 GB of music.. I am not sure but have read somewhere there are file name limits on the hard disk that don't exist on other media. have you tried deleting some files and see if the copy comes available ? you might have reached some limit.

As you are using older 2660 firmware which is the first ver that supports 32gb external memory you still have limitations to the number of folders and file name length, I think maximum files (2000) etc , I don't knowif newer firmwares remove these limits

[Guest001]

6 GB of music.. I am not sure but have read somewhere there are file name limits on the hard disk that don't exist on other media. have you tried deleting some files and see if the copy comes available ? you might have reached some limit.

As you are using older 2660 firmware which is the first ver that supports 32gb external memory you still have limitations to the number of folders and file name length, I think maximum files (2000) etc , I don't knowif newer firmwares remove these limits

I have about 16gig on my HDD and have 5.37 on a SD card which i can add to HDD if I want to as the copy seems to want to work.
I have latest firmware. All of my songs are individual tracks in one file You can only copy to the HDD off an SD card NEVER off a CD or DVD

[FJ Steve]

You can only copy to the HDD off an SD card NEVER off a CD or DVD

I dispute that......have copied MP3s from CD/DVD no problems whatsoever

[Guest001]

I dispute that......have copied MP3s from CD/DVD no problems whatsoever

To clarify you cant rip an original CD to the HDD I havent tried making a CD of MP3's and copying that. To much of an effort Easier to put them on an SD card

[omega31]

Its not likely that the battery went flat due to the old canbus issue. You should have a canbus gateway module which is not affected by that issue.

You may have another problem. That's not to say the headunit cant have drained the battery but you will need to do some testing to determine what the cause is.

You can test the draw across the battery terminals with a multimeter while car is off and radio on and then lock the car and wait 45 mins and test the draw again, listening to the headunit to hear if the fan has shut down. Even better would be to test the draw across the fuse for the headunit circuit in the fusebox.
The rns should shut down and draw next to nothing. In standby the fan still runs for 30mins.

As for the volume buttons not working I would load the proper firmware again (the battery drain fix CD swaps some tables over and forces them to load) and get a fellow forum member to validate the coding of your canbus gateway and rns.

Sent from my HTC One X using Tapatalk 2

Just a quick update,

Used a Clamp Multimeter to test the Drain before and after the 4120 update and is was the same or even better, using less power on idle.
Old firmware shutdown took 15 seconds and on new 4120 firmware it takes 30 seconds which is perfectly ok as giving the fan more time to stop.

I can only conclude the drain was not caused by the update itself and possibly a battery issue not able to keep the charge, As the Car is new I will request the Dealer to check it next week.

FYI, All gateway functions are back to normal and Volume Control working again.

Thanks for the help

[kamold]

Just a quick update,

Used a Clamp odometer to test the Drain before and after the 4120 update and is was the same or even better, using less power on idle.
Old firmware shutdown took 15 seconds and on new 4120 firmware it takes 30 seconds which is perfectly ok as giving the fan more time to stop.

I can only conclude the drain was not caused by the update itself and possibly a battery issue not able to keep the charge, As the Car is new I will request the Dealer to check it next week.

FYI, All gateway functions are back to normal and Volume Control working again.

Thanks for the help

Good to hear you fixed it and always good to update the forum with outcomes.