Originally posted by elisiX
View Post
I have required my APR tune to be installed twice so far. Once initially and a second time post the VW SC24S4 service campaign. To achieve this I have had to make no less than 5 trips to the victorian APR dealer which is a pain. Two of the superfluous trips were because the APR computer system had not seen my ECU progam number, which I could have passed to them beforehand had they asked and the third because it was installed without switching capabilty. I suspect their first course of action had I just taken it back yet again would be to reload the program and send me on my way. My bet is this would be yet another wasted trip!
As I have the tools to look at the data it seems to make more sense for me to come up with some data to prove it was not working properly. More difficult to refute. I am not sure how the APR dealer would ascertain it was working in suburban Melbourne other than to check it is installed correctly which I believe it is.
By grabbing data I have shown;
..it is pulling ~18% less engine Load at the exact same rpm and speed with WOT as it was before.
..it is doing logged 0-100 times with the tune active that are identical to what I can achieve in stock. Backed up my seat of pants and no TCS action or Axle tramp.
But the real kicker is that it is intermittent. I was on my way to get it checked out which by the way involved a 2 hour drive each way and it came good before I got there. So I aborted that trip. Now because the issue has come back I may need to leave my car with them for a few days so they can have a decent look at it and hopefully see what I am seeing. Then work out what is going on and fix it.
Comment