I need to replace the orange clip that the bonnet rod rests in when the bonnet is open on a 2010 Octavia wagon. Has anyone found a decent aftermarket source for these?
Cheers
Dan.
Announcement
Collapse
No announcement yet.
Search Result
Collapse
12 results in 0.0079 seconds.
Keywords
Members
Tags
-
At my wits end - gear lever Mk4
Can anybody help? - Ive got a Golf Mk4 1600SR - Where the gear lever goes through the bottom of the car it then connects to a stiff metal rod that then goes forward to all the gear linkages. Now then...back to the underneath part, as the gear lever comes out of the bottom of the car (directly under...
-
T4 inner tie rod replacement
I'm trying to undo the inner tie rods, as the steering rack needs to come out. is there a easy way to undo the tie rod at the rack end. some youtube clips show some type of tube spanner, while another uses a 32mm spanner. i have a 32mm spanner, but it is super loose, a 31mm would be better i think....
-
Track Rod/ Rack Rod
Hi,
Could someone please tell me where I can get spares for VW Golf MK4.
I had a bit of look on the sponsors on this site, but to be honest being new to VW I would not have a clue on who would be the most reliable for parts.
I am after a Track Rod/ Rack Rod, I...
-
Wastegate rattle in 1.4 TSI MY15
Starting a thread for the wastegate rattle in 1.4 TSI MY15 motors.
For background, this is not the same as the actuator rod rattle seen in MY13 models. MY15 models had a redesigned actuator rod which did not require a clip to stop the rattle. The mechanic recommended replacing the actuator...Last edited by agentthumb; 22-12-2016, 06:48 PM.
-
Jetta steering clunk - tie rod?
Afternoon all,
Girlfriends Jetta (110,000 kms) has started in recent times to make some clunks through the RHF over bumps. Not just any normal bump, but typically square-edged ones, such as manhole covers - rail lines - etc.
I've been underneath it, and it's definitely coming...
-
Golf MK4 Selector rod installation
Hi
I have a new selector rod to install. It is the plastic rod to install over the 2 ball studs in the linkage. It appears as if it should push on, but on trying it obviously needs some force. Is this the correct way to install and how is it usually done?
Thanks
Miguel
-
02M shifter rod/Wrecked 02M gearbox
Hi,
Looking for a wrecked O2M gearbox to be able to grab the shifter rod (02M301233L) from. So if you know anyone with a trashed gearbox i'd loved to see if they have it spare. My gearbox is the DRP if anyone knows if that makes any difference in the rod.
Part in question...
-
URGENT: Golf Mk1 Tie Rod End
Looking urgently for an inner tie rod end for a 1979 Mk1 Golf petrol.. ours is warn/screwed and needs to be replaced for rego.
It is for a Cancer Council charity rally, so the cheaper the better.. doesnt need to be in perfect condition, just good enough for a pink slip.
Location...
-
Nut size and thread tie rod end steering
So I'm driving home hear an awful rattle and skids. Get to an island on the side of the road. Hop out and look. The steering tie rod end is off the wheel and sitting on the road. Attached to the rack still.
anybody know the nut size. Thread size etc so I can get a new one. I know it...
-
:: ECS Tuning :: VW MKIV Tie Rod Service Kit - Click Here !!!
Click HERE to order or for more information.
VW MKIV Jetta Tie Rod Service Kit - Starting At $66.95!
The tie rods are the link between the steering rack and the steering knuckle on your MKIV Jetta. They utilize a ball socket to articulate movement while...
-
Parts for Passat MK1
Hi :
Can some one please direct me with where to buy (Tie Rod ends - Sub frame bushes and ball joints ) .
Thank you
Amir
2025 - Below Forum
Collapse
Test Slow
Collapse
