I have a 2012 MK6 GTD, I have a clunk/knock noise coming from rear, only happens at low speeds under 30mph and going over bumps or uneven road. I’m pointing it towards the shock absorbers/top mounts.
Does anyone have part numbers for the shocks and the top mounts please? Car has Dynamic chassis...

So spent the better part of the day rotating wheels, installing front & rear mudflaps on the Golf. But the main reason for the work was installing the alternate front & rear jack point mounts. Now it will be easier to lift the car to use jack stands. Or you can use this method to get a golf...

Hey everyone. Busy trying to sort out this nightmare of a B6 I purchased a couple months ago. Been making decent but slow progress. I'm getting there though!

Question I have: has anyone done the 5Q0 Blind Spot Radar retrofit on their B6 wagon? If so where/what did you use to mount them?...

Hi All, I'm finally getting around to replacing the engine mounts in the Polo as they are pretty well sh%gged at 140,000ks, for years i've been putting up with a slight knocking sound coming from the drivers side door area, I figured it was the strut tops but I think engine mounts are more likely the...

Engine is not level but low at gearbox end, mounts look fine, is this normal. Fitted cam belt & pump kit in-car, is there knack to remove the engine mount bracket once unbolted, it's a tight space.

Where can I find free pdf repair & parts manuals?

Hey all,

I'm moving on my long-stalled mk1 golf 4-door project - engine and gearbox upgrade to mk4 GTI ... the kitchen can wait.
I have a stock donor mk4 gti complete and am looking at what I will take. It has a K03 turbo but I'm thinking K04 - I read the AGU engine has forged crank,...

Howdy,

I have a 2006 T5 LWB which has had the lifted Seikel suspension in it since 2014. A few years ago I started to get some clicking from the front CVs when turning hard and putting some load on. Knowing the this setup would wear out the CVs prematurely, we had the shafts rebuilt with...

Hey Folks. I bought a T4 camper for my daughter as my first initiation into the world of VWs. Have already replaced some electrics, engine mounts, gearstick bushes, various hoses. Looks like I have a head gasket to work on next!

My 2013 Tiguan squeaks driving straight over bumps. If I go across the bumps at an angle it doesnt happen.
When I bought the car, I was told its because of the suspension mounts which I changed with the drop links but it didnt help. As it only happens going straight at a speed bump I am thinking...

Hey guys. I got quoted 1350$ by vw north shore to have my strut mounts and bearings replaced because the suspension is clunking at low speeds and around turns. Considering I’ve seen this type of work being done before the cost sounded crazy to me. It’s a 15 minute job on each side. And it’s a...

Hey all

I am having a minor issue with my 2009 golf BKD DSG being a bit rough on idle more so recently. I have suspected the engine and gearbox mounts are worn just due to the way the car drives for its age.

I cannot seem to find correct part numbers for the BKD top gearbox...

The front strut upper mounting and thrust bearing is starting to make clunking noises and will need replacing sometime in the months ahead. Before I use OEM parts, has anyone upgraded to an aftermarket adjustable strut top mounts?

Help please
I am trying to identify the two small panels that some kind soul decided to steal off the front of my van when it was parked near the Royal Brisbane Hospital. Nothing else was removed or damaged, just these 2 small panels (roughly 70 x 100) covering up some white plastic mount. These...

Hi all
I have been a regular visitor on the site for quiet a while... you have been really helpful when researching things about my van ... and my van is a 2006 Multivan Sports Turbo Diesel. Love the flexibility of the van although no longer removing the back bench seat anymore. Bought a frame...

I should have taken a photo, but ever since I replaced my engine mounts with ECS ones, my car has been a bit of a rattler, it's pretty loud.

It may be just the combo of poly engine mounts and poly subframe mounts, but when I was changing the oil over the weekend I noticed my downpipe is...