I have a code P000A and it’s causing like a limp mode, really struggles to get to 70, won’t rev properlly etc. I’ve been to the mechanic and they said an oil change should fix it but it hasn’t and now it seems to be a throw stuff at it and see what works (talking about a sensor at the front...

Looking for good timing chain replacement kit(s) in country. I know about ESC tuning in the US. To include chains, guides and runners, crank sprocket. I know chain covers, camshaft bracket/bridge, camshaft adjuster magnet and camshaft control valve will need to be purchased separately as well as required...

Hi guys just had my MK6 golf gti serviced by a VW dealership and they found a small oil leak coming from the camshaft housing.
They have quoted me just over 3k to have it repaired.
They have said it's very labour intensive and they will need the car for 2 days.
They say it requires...

Hi guys
Car (V5 AQN Bora) has thrown error codes (P0343 and P0346) which correspond's with the Camshaft Position Sensor(s)
Just wondering location of the sensor and how much of a PIA it is to change.
Part numbers are nice too
Thank's

Hello guys,
Based on my knowledge, I think there is 2 types of motors mounted on POLO 9N, the first is with only 1 camshaft, and the second comes with 2 camshafts. So, can I figure out my motor's type based on its VIN number? Also, how can I know my car's type (DUNE, CONFORTLINE...)
Thanks...

Hey guys I bought a 2008 transporter 6 months ago now has 190,000 km and I have just changed the camshaft, followers, oil and filter because it was backfiring and put scrapes in the camshaft and followers were rounded a little,
Typical car dealer bodging up cars...
Anyway I can’t afford...

Hey guys I bought a 2008 transporter 6 months ago and I have just changed the camshaft, followers, oil and filter because it was backfiring and put scrapes in the camshaft and followers were rounded a little,
But now it turns over but wonÂ’t fire, it was running before we pulled it apart,...

Hi all, first time poster in here.

I have a silver T5 2.5TD that has been quite good to me so far, until recently when the camshaft wore so badly that it made a noise like a single cylinder dump truck! Due to this forum coming up on a google search and a specialist garage in Annangrove...

I own an 09 transporter ive always had it serviced and used vw oil i put it in at vw campbelltown for a service (140k) and they told me that the lobes on the camshaft were worn and that they found oil in the cylinder head ended up costing me just under 6k. How can this happen at 140k ive lost all my...

Hi, I have a mk7 golf R and had the engine light come on today. I took it to where I get the car service and they said the error was coming up as camshaft position sensor short to ground. Guy wasn't really sure about it and said would have to bring it back and leave it with them to look into further....

My 2012 Yeti 1.8TSI Manual has been fantastic.... Its done 130000kms and I have had no issues except for a couple of wiper blade replacements. Until last Friday that is, when the engine warning light came on. It had been running alittle rough and was due for a oil change in about 2000km. Local...

16396 - Bank 1: Camshaft A (intake): Advanced Setpoint not Reached (Over-Retarded)
P0012 -35-10- --Intermittent

I've seen this one come up 3 times in the last 6 months now. Anyone else had it or have any knowledge of the likely culprit. I always thought our car only...

Volkswagen Recalling 92,000 Cars For Shearing Camshafts, Loss Of Power Brakes (Update) 

Volkswagen’s troubles continue, but this time it’s not emissions-related cheating, it’s failing camshaft lobes which can wreak havoc on braking performance.

Volkswagen is recalling...

In my quest to find the source of my start-up rattle in our Mk6 GTI, I am just about to replace the camshaft adjustment magnet with the revised item, and following that, I will be looking to replace the N205 valve. Link to product: N205 valve for 2.0TSI engine

Several weeks ago I removed...

New in Box Newman 8V Camshaft 272 for Hydraulic Lifter Heads-Designed for Use with original timing marks-so no need for a Adjustable Vernier + New Set of Hydraulic Lifters-$350 Posted



New In Box Techtonics Tuning Chip EPROM Cam Version, 7,000 rev limit for Digifant II...