What have you done with your Polo so far (and today)

[SueySauce]

Thanks for these videos green_comet - really helpful as I've been wanting to do these for a while but unsure of how to do this within OBDeleven.

In case anyone is interested, I've found a way to disable LED licence plate warning if aftermarket LED lights are used without correct resistors, by changing the type of light that is recognised:
Central Electrics (9) > Adaptation > Leuchte25KZL HA60 > change Type_Of_Load_25 from "2*5W" to "allgemeineLEDmitOpenLoadDiagnose" > security code 31347 > clear errors and re-scan

If anyone knows whether it is possible to perform the below using OBDeleven, that would also be really helpful:
- TMC traffic reports (there was a thread a few weeks ago, but I think everyone is stuck at enabling TMC to 1024 but nothing happening after, myself included)
- Comfort blinkers (changing the indicator blinkers from 3 times to say 4 or 5)
- Mirror dip on reverse (I believe this may not be possible on the 6C GTI but happy to be corrected)

[teflon]

Great videos green_comet... Just impulse bought the odbeleven as having the autolock feature would be good. And yes agree would be great to turn off that driver's door beeping alarm.

Would be great if mirror dipping could be activated... Not holding my breath though.

Sent from my Pixel XL using Tapatalk

[car_nut]

Well done thank you green_comet, ordered mine yesterday, your commission is in the mail, you wish no doubt.

Look forward to doing all of the above and also getting rid of the Soundaktor noise.

[green_comet]

No worries guys, I'm enjoying making the videos and I'm glad they're helping others.

[Gti 2016 polo]

Hello Guys Just seeing if Any one has tryed The Forge Cooler or the Wagner Compintion Cooler on there Polo
I got a 2016 Polo 1.8 gti turbo with a ETUNERS tune an Dump pipe Car goes really well

[JB007]

The video's are great man. Well done. Any chance you can do mine for me. I am in Melbourne. Can you turn down the exhaust amplifier when sport is selected? I would really like that.

JB

[maxrob200]

Excellent How-To videos. Have you worked out how to disable the start-stop "feature"?

[Harrydhillon]

Try
Disable Stop Start
Gateway Control Unit 19 | Adaptation | Stop Start Voltage Limit
Change to 12 (default is 7.6)


Sent from my iPad using Tapatalk Pro

[green_comet]

Try
Disable Stop Start
Gateway Control Unit 19 | Adaptation | Stop Start Voltage Limit
Change to 12 (default is 7.6)

This is exactly what I did and it works. You'll still get the little start stop icon (Letter A with a line through it) on the screen, but it'll never activate again.

[maxrob200]

Thanks for the info on Start-Stop. It is an absolute pain to have to remember to press the button every time I get into the car. Looks like I will need to buy an OBDEleven

[teflon]

Got my odbeleven today and activated the autolock as per green_comet's guide. Have also turned off the sound actuator and will test the car tomorrow without it on. Gone through the obd eleven pro threads and I assume mirror dip on reverse is not available?

Next "mod" may be the needle sweep on ignition.

[green_comet]

Made a few more videos today, let me know if there's anything else you guys wanna see.

[car_nut]

Green_comet: I know I am being lazy but you seem to enjoy doing these so-
First thing I do after starting the car up is push the traction control button once to turn it or ASR ("Antischlupfregelung" translated 'anti slip control' off- would be nice to have that off permanently or better still have the default as off every time the car is started but still be able to push the button to turn it on if required.

Copied everything you have put up so far, loving it.

[JB007]

these videos are so helpful. man if i only had a android phone and not an i phone I would get one of these cables and like green comet.

[green_comet]

Green_comet: I know I am being lazy but you seem to enjoy doing these so-
First thing I do after starting the car up is push the traction control button once to turn it or ASR ("Antischlupfregelung" translated 'anti slip control' off- would be nice to have that off permanently or better still have the default as off every time the car is started but still be able to push the button to turn it on if required.

Hrm, I'll do some reading and see what I can come up with.

I've been following this guys site quite a bit as it seems many MK7 Golf tweaks work on the Polo.

https://sites.google.com/a/naturalnetworks.ca/vw-golf-mk7-vcds-how-to/