A guide to enable EU specific features for AU Spec Tiguans

[Jap]

What about mirror link in motion with vcds? I know it can be done with obd11 but I cannot find long coding equivalent.


Sent from my iPad using Tapatalk

theres not a long coding equivalent, it’s in the firmware so a flash update

[iDiesel]

V1 OBDeleven on sale at the moment $129
I was checking to see if V2 version had arrived, but doesn't look like it yet

[Jap]

V1 OBDeleven on sale at the moment $129
I was checking to see if V2 version had arrived, but doesn't look like it yet

it went on pre order a couple of weeks ago, and I think it’s out for delivery on 17th June, but it’s all sold out if you didn’t manage a pre order

[Guest001]

It has been validated WORLDWIDE except for China as from May 23rd and as per the email i got you can buy credits direct from the app now.

You can also log on each day and get 6 credits a day by (not) reading the adds that it pops up for 30 secs at a time.

[iDiesel]

Damn it!
I had been randomly checking their website and never saw any pre-sale. Oh well, just have to wait for next shipment

it went on pre order a couple of weeks ago, and I think it’s out for delivery on 17th June, but it’s all sold out if you didn’t manage a pre order

[Guest001]

V1 OBDeleven on sale at the moment $129
I was checking to see if V2 version had arrived, but doesn't look like it yet

I posted about the pre order in a thread two weeks ago and included the link in it.

It isnt on the site that is selling htem for $129 as that is an Aussie site its was on obdeleven.com


Here it is Voltas IT, LCC

[iDiesel]

Other than iOS compatibility and maybe faster processing in the unit, is it worth getting the V2?
At this stage I'm only thinking about modding some of the minor tweaks; stop/start, undertake on LHS, maybe traffic sign recognition and Traffic alerts.

[jeromeo]

Other than iOS compatibility and maybe faster processing in the unit, is it worth getting the V2?
At this stage I'm only thinking about modding some of the minor tweaks; stop/start, undertake on LHS, maybe traffic sign recognition and Traffic alerts.

Honestly a little bit expensive for just a couple of tweaks.
I bought the hex-net version an cannot even code mirrorlink in motion.
I would be better of paying someone to do the tweaks.

Sent from my SM-G965F using Tapatalk

[Guest001]

Other than iOS compatibility and maybe faster processing in the unit, is it worth getting the V2?
At this stage I'm only thinking about modding some of the minor tweaks; stop/start, undertake on LHS, maybe traffic sign recognition and Traffic alerts.

I have tried doing speed sign recognition and it doesnt work on mine.

Did it with the APP and it said success but no signs ever appear Have rebooted unit and all but nothing

The stop start wont turn off with the app in mine either Tried yesterday and says not applicable.

Also headlight assist wont work either.

Not as good as I thought it would be or maybe VW had introduced software to stop certain things as works in some earlier vehicles apparently

Traffic alert works cant see the worth in LH passing as will only light up the warning in the mirror housing

Having taillights on with DRL is more sensible and blinkers on with boot open

[Simonr23]

Hillbilly, I have the steps printed out in my car for

Traffic sign
Stop start
And a couple you haven’t mentioned.

All work perfect. Have had to reenable a few of them each time it goes to vw for warranty work- as they reset the computer each time. Later on, I can write down my steps for you to try.

Perhaps you’re right and the process is different/blocked(I doubt it’s blocked tbh)

Edit- left hand passing should be an actual slowing of the car when on cruise control- annoying and dangerous, not just light in the mirror.

Stop start gives no sign of it working, until you are in a position where it wants to turn the car off- and it won’t. You just get the little status icon/message on the display. I believe it ups the voltage required to enable stop/start, to a voltage that isn’t attainable.

[iDiesel]

Edit- left hand passing should be an actual slowing of the car when on cruise control- annoying and dangerous, not just light in the mirror.

This is one I definitely want as I cruise u and down the freeway between Sydney and Central Coast and often have idiots doing 90-100 in the fast lane, while I sit on 110km/hr in the middle...

[Guest001]

Hillbilly, I have the steps printed out in my car for

Traffic sign
Stop start
And a couple you haven’t mentioned.

All work perfect. Have had to reenable a few of them each time it goes to vw for warranty work- as they reset the computer each time. Later on, I can write down my steps for you to try.

Perhaps you’re right and the process is different/blocked(I doubt it’s blocked tbh)

Edit- left hand passing should be an actual slowing of the car when on cruise control- annoying and dangerous, not just light in the mirror.

Stop start gives no sign of it working, until you are in a position where it wants to turn the car off- and it won’t. You just get the little status icon/message on the display. I believe it ups the voltage required to enable stop/start, to a voltage that isn’t attainable.

Have been out and tried a few things

Stop/start says not supported

Traffic sign recognition says it did it but no signs show up

Headlight washers activate but dont think car has them

Battery level activates but on pressing button it just goes from Time to Copyright and a 100page rant about the software.

Vibration on Lane assist is in the MIB but only gives option of on or off. Not adjustable as app intimates.

[kamold]

Where possible it's advisable to use manual coding/adaptation as you can easily reverse what you've done.
The apps change potentially multiple things and you can't easily undo them
Some things like vim change things that aren't simple adaptation/coding so are the only way to activate.

[phonebooth]

Have been out and tried a few things

Stop/start says not supported

Traffic sign recognition says it did it but no signs show up

Headlight washers activate but dont think car has them

Battery level activates but on pressing button it just goes from Time to Copyright and a 100page rant about the software.

Vibration on Lane assist is in the MIB but only gives option of on or off. Not adjustable as app intimates.

MY19 Highline with R-Line+S&V

Same deal with mine when using the built in apps... OBD11 app says Traffic Sign Recognition isn't support on my car (could be the new AID triggering that?) Car doesn't have headlight washers and I haven't been confident enough to try the others. I will when I can work out how to "backup" the factory coding using ODB11.

[Guest001]

MY19 Highline with R-Line+S&V

Same deal with mine when using the built in apps... OBD11 app says Traffic Sign Recognition isn't support on my car (could be the new AID triggering that?) Car doesn't have headlight washers and I haven't been confident enough to try the others. I will when I can work out how to "backup" the factory coding using ODB11.

Mine has the'Old" aid

Am going to try to code them tomorrow

Will write down the settings before I alter them

Want to do the Headlight assist but dont know if I have the "good" versions to do it

Here are the pages from ERWIN on whats in my car



Got it to do the 'Turn off Stop Start' but wouldnt do High Beam Light Assist