If you want the 3xxx RNS firmware and POI's to work.. look here.

[vk]

Thanks to "mythik", I have worked out that you can install the 3970 firmware and have POI's working due to a bug in the firmware itself ^_^
The firmware beta 3970 series does not partition your drive (it should), so what you can do is install your 2760 firmware with your maps, and then upgrade straight to 3970 and still have POI's working as they are located in the old location.

Just tested this myself today, works well for me because my BT audio had issues in the 2xxx firmware.

Enjoy.

link to firmware:
Volkswagen RNS 510 Firmware Upgrade to version 3970 / 3974 / 3976 / 3978 | my-gti.com

(Make sure you are on 2xxx firmware before you upgrade to 3970, as it must be in the 2 partition format and not the 3 partition format.

edit: Tested on a version D unit only. No reports of it working on other units yet, please read thread of info.

[118 Tsi]

No fun

[vk]

No fun

Did it stop at any given time? (ie any of the loading bars?), I had that a while ago when trying to install sw 2760 and it turns out it was my cd writer.

also what rns version have you got?
Mine is a version D

edit:
try going from 2xxx to 3930 adn then to 3970

http://www.my-gti.com/3114/volkswagen-rns-510-firmware-upgrade-to-version-3930-3934-3936-3938

[118 Tsi]

didnt even start showing the loading bars. this **** is all so hard to do on a mac! all these rar files and stuff dont like working. I believe my unit is a d because it had a sticker stuck behind where the head unit sits with a big D on it..? (mk5 r32)

[vk]

didnt even start showing the loading bars. this **** is all so hard to do on a mac! all these rar files and stuff dont like working. I believe my unit is a d because it had a sticker stuck behind where the head unit sits with a big D on it..? (mk5 r32)

When did you purchase the unit?
If its a D it should have just worked first off, have you done any sw loading before? Id say the mac isnt burning the image right, my mac used to have troubles.

[118 Tsi]

ok i may give it a spin of a windows computer and see. Its a factory fitted unit. Thanks for your help mate. Just annoying me not being able to use the larger sd cards!

[vk]

ok i may give it a spin of a windows computer and see. Its a factory fitted unit. Thanks for your help mate. Just annoying me not being able to use the larger sd cards!

factory fitted in a mk5 doesnt sound like it would be a revision D unit :S

[118 Tsi]

---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------

just tried with a disk i burned off windows and same error, it loads like it should, then says searching for swl or something like that, then "valid swl image found, starting swl"

Then BANG error again. starting to piss me off, may see if someone in melbourne can lend me their disk

[vk]

---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------

just tried with a disk i burned off windows and same error, it loads like it should, then says searching for swl or something like that, then "valid swl image found, starting swl"

Then BANG error again. starting to piss me off, may see if someone in melbourne can lend me their disk

as you can see there, yours is a revision A unit, these are harder to please than the others as they are the first series of units :O
I believe you need to make modifications to the firmware in order to get newer firmwares on the A units, might need to google that.

[118 Tsi]

well dont i feel like a fool now! What the hells the other sticker with the "D" on it haha

[vk]

well dont i feel like a fool now! What the hells the other sticker with the "D" on it haha

I have no idea

[118 Tsi]

and to top it off my unit has forgotten everything, radio dont work, media dont work, maps dont work without putting thee "Maps" disk in. GRRR!! Think i have lost everything off my hdd too

[vk]

and to top it off my unit has forgotten everything, radio dont work, media dont work, maps dont work without putting thee "Maps" disk in. GRRR!! Think i have lost everything off my hdd too

Hmm you seem to have gone into the idea of flashing the firmware completely unaware aye?

[aussietig]

edit: Tested on a version D unit only. No reports of it working on other units yet, please read thread of info.

I think that might be the case if you actually have a D unit.

Certainly when I originally tried what you're saying using FW 3810, it didn't work!

http://www.vwwatercooled.org.au/foru...one-58954.html

But maybe it's worth having another crack at it now on my C unit and with FW 3970.

[vk]

I think that might be the case if you actually have a D unit.

Certainly when I originally tried what you're saying using FW 3810, it didn't work!

http://www.vwwatercooled.org.au/foru...one-58954.html

But maybe it's worth having another crack at it now on my C unit and with FW 3970.

I had no problems going from 2760 to 3810 originally, so may be it is only a version D, i have read that you can modify the firmware to run on older units though>