OBDEleven - The new kid on the block!

[Spinifex]

Spinifex............Another option might be to search through the "engineering menu" in the MIB unit for a similar facility......

Hi Don,

Thanks for feedback. Apologies I haven't responded sooner - unfortunately, this forum doesn't seem to work the same as previous forums I've been on, in that I don't get an automatic page showing my subscribed threads that have been responded to... I have to go searching through my profile settings to load my subscribed posts... and I didn't realise anyone had made any further posts in here (or am I doing it wrong?)

I've enabled the engineering menu on my car some time ago, but honestly didn't really understand much of it. I didn't have much of a poke around, as it didn't make much sense, and from memory, it didn't have the same "return button" to return to the previous menu, as the main MIB system, so I couldn't work out how to go back through the screens - I seemed to have to close & then re-start the engineering menu from scratch every time I wanted to look at something different.

Will have more of a play around again and see if I can identify anything.

[Spinifex]

Question: I've used the one-click app (only cost 10 credits, and I haven't seen the long-coding for this listed anywhere) to enable the "automatic lock doors if key is outside vehicle" function.

However - it's WAAAYYYY too quick to do so.
I've barely closed the door and set both feet on the ground (with the key either in my pocket or hand) and the car is already locking the doors.

While this is the intended purpose, I'd like to delay the time-frame of locking to something more realistic, like 10 seconds, or a particular distance away from the car.
Does anyone know the long-coding parameters I need for this?

Eg: the auto-locking is SO instant, that it's instantly locked and mirrors-folded, when I close the drivers door - yet my passengers haven't even opened their doors to get out yet!
Also makes getting out of the car and going to the boot a frustration, as it's locked before I get to the back of the car.

If I could set a longer time, or something like 10m away from car, before locking occurs, this would be much more realistic.

Any and all help appreciated.

[XaGiCo]

Hi Golferos!

I declined the promise on my private profile in ClubVWGolf!

XaGiCo - 2.0 TDI 150 CV Sport R Line 4Motion - 2014 - Ponferrada

Club VW Golf España

GOLF 2017 en mi MIB2

En unos días compartiré la codificación y requisito, en su sitio!

Club VW Golf España

Golf 2017








Golf GTI 2017











Saludos :secta:

Cambiar a Pantallas a Golf 2017 o Golf GTI 2017Switch to Screens for Golf 2017 or Golf GTI 2017

MIB2 requirement as of version 8XX

ONLY CODING WITH OBDELEVEN /ODIS / VCP

1) 5F - Information Electronic
2) Coding

Byte 02

CAR DERIVATE SUPPLEMENT
1
HEX
10
BINARY
00010000





Thanks @Zloybob

Next Version PDF 1.5 in Last week of January 2017

Regards and Happy New Year 2017 !!

XaGiCo

[Stewiefly16]

Hi All, Got an ODBeleven last week, got the app, got it connected and then put it aside over the break as to many other things on. Picked it up this morning and had a fiddle, neat thing. Turned on the TMC as walked through by DV52 back on page three of this thready, worked a treat, ill be interested how it works when I can get out on the road with it. I am also interested in coding Dynamic LED Indicators on the MkVII Golf R, like this:

https://www.youtube.com/watch?v=hCSDuiTwsY0

Is this possible?
Thanks in anticipation,

[DV52]

I am also interested in coding Dynamic LED Indicators on the MkVII Golf R, like this:

https://www.youtube.com/watch?v=hCSDuiTwsY0

Is this possible?
Thanks in anticipation,

Stewie: Ironically the very next video after the one that you posted answers your question (see below)!!!

Alas, "Leuchte programming" isn't able to provide a delay between the inner/outer lights as shown in your video. With coding, you can have counter-blinking turn signals, or synchronous blinking turn signals.

The effect that is in the video is achieved by adding a separate piece of hardware (and an adapter cable). So no coding needed - just hardware

Don

[Guest001]

Hi Don,

Thanks for feedback. Apologies I haven't responded sooner - unfortunately, this forum doesn't seem to work the same as previous forums I've been on, in that I don't get an automatic page showing my subscribed threads that have been responded to... I have to go searching through my profile settings to load my subscribed posts... and I didn't realise anyone had made any further posts in here (or am I doing it wrong?)
.

Adjustable here



Set subscription mode to instant email

[Stewiefly16]

Thanks Don,

What I didnt really want to hear, , not the last disappointment that I will face I suspect, .

Found the adaptor kit at VW central for AU$200, need to work out if I want them that much.

Thanks again for the speedy response Don

[Brian]

Hey Stewie, is not the "pace car" indicator adaptation "close enough" to what you want? Especially at zero cost to programme using either OBD11 or VCDS.
http://www.vwwatercooled.com/forums/...ml#post1154325 - post courtesy of Don (DV52) again, thanks to Don for all your work!

[Stewiefly16]

Hi Brian,
All for the zero cost option, ., ill take a look, thanks Brian and Don again.
Stu

[transparu]

Hope this isn't off-topic folks.
I have a 2012 T5.1 Transporter and am considering buying the OBDeleven with dongle.
Would OBDeleven allow me access to the Distance Impulse Number on my vehicle? I would like to calibrate the speedometer for new tyres/rims. I can increase the sizes in Queensland (within ADR limits) IF the speedometer is also within ADR limits. This means I need to "recalibrate" the speedometer. As I understand things, a GPS "speedo" is not acceptable to the law so the instrument panel needs to be accurate.

If anyone has a comment here I'd appreciate it - or if there are pointers to posts where people have made the DIN changes. I DO understand that this can be done on some sedans, at least.

Thanks in advance.

[DV52]

Hope this isn't off-topic folks.
I have a 2012 T5.1 Transporter and am considering buying the OBDeleven with dongle.
Would OBDeleven allow me access to the Distance Impulse Number on my vehicle? I would like to calibrate the speedometer for new tyres/rims. I can increase the sizes in Queensland (within ADR limits) IF the speedometer is also within ADR limits. This means I need to "recalibrate" the speedometer. As I understand things, a GPS "speedo" is not acceptable to the law so the instrument panel needs to be accurate.

If anyone has a comment here I'd appreciate it - or if there are pointers to posts where people have made the DIN changes. I DO understand that this can be done on some sedans, at least.

Thanks in advance.

transaru: I assume that you will want to alter Byte 0, Bit0-3 in the Instrument control module (@ address hex17) as shown below using VCDS



I suspect that OBD11 will be able to do this (if you buy the PRO unit), but you need to understand that it does things a little different to VCDS. OBD11 doesn't have a long coding helper screen, so you won't be able to change Bit 0-3 in one operation like VCDS. You probably will need to change each individual Bit and I suspect that you will need to "interpret" the meaning of each Bit.

But it should be doable - I reckon

Don

[greyhamism]

Thought id chime in and say i used my OBDeleven Pro to help install a GTI paddle shift steering wheel into my Jetta. Was great to use and the backup function gave me a lot of 'piece of mind', as this was my first time delving into mods that needed codding to work.

I originally got OBDeleven for diagnostics as i was having a few issues with numerous intermittent CEL's, and having an in depth VAG-specific look at things really help sort out the issues i was having. Highly recommend anyone new to the VAG game to get themselves one. Great help for diagnostics, but also has lots of awesome coding mods for the newer generations ( MK7 etc)

[transparu]

Don,

Thanks so much for this. You give me a little more confidence that this is the route to go. A pity there is no one around here in Brisbane I can see who has a VCDS I can use to look at my car.

I'll be sure to put any experience I gain up on the forum.

Dave

[Spinifex]

........ A pity there is no one around here in Brisbane I can see who has a VCDS I can use to look at my car.........

Hey Dave - there's a few of us around with either OBD11 or VCDS cables/programs here in Brissy.

If you can make it, come along to the happy laps at Willowbank
http://www.vwwatercooled.com/forums/...th-117324.html,

then join us for a cruise/get-together afterwards
http://www.vwwatercooled.com/forums/...ml#post1222031.

I'm sure we can bring our various cables and dongles, etc and have a look at your car for you.
Great way to meet some like-minded enthusiasts too.

There's no cost for either event - just $20 if you want to go to happy laps and enjoy the provided canteen breakfast, but that's a sharp 7am start.

[transparu]

Thanks Spinifex - I must say I hadn't heard of the Raceway event, though I'm tied up this weekend.
I do appreciate the info and will keep my eyes open for future such activities.
Dave