A couple of questions: I pulled apart the centre console in my Polo 6C to install an extra USB socket in the dash, and along the way I dropped one of the torx screws into where the multimedia control unit goes, nowhere to be seen.
So my first question is, where can I buy a replacement screw?...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
17 results in 0.0130 seconds.
Keywords
Members
Tags
-
Centre console trim torx screws
-
How to remove M6 rounded/seized screws from MK5 door?
I recently acquired another MK5 GTI (can't help myself) and was set to replace the door lock actuator, so removed the door skin and then get to removing the M6 screws holding the actuator in place, but managed to round off the screw so that I can no longer remove the screws anymore.
...
-
Amarok Trendline M21 Bonnet Strut conversion kit
Remove mudguard screws. They are a 6 point.
The front mounting hole needs to be redrilled. 293mm centres. Measure from bolt hole nearest windscreen.
Check brackets for alignment. Do not tighten.
The lifting...
-
Missing screws on the ignition ramp. Can someone tell me what they are?
Hey guys,
Just noticed that the 2 screws holding down the ignition ramp are missing (previous owner).
I'm replacing soon the 4 spark plugs and I'd prefer to have the ignition properly secured.
Does anyone know what kind of screw size goes in there?...Last edited by GolfVFSI; 23-08-2022, 02:55 PM.
-
Third Brake light replacement.
Hi all,
Recently I replaced the top ( third) LED brake light as the old one had seen better days and was popping out at one end slightly due to fatigue and the seal had cracked. I bought a new one from one of the many on line sites that sell them for about $20 or so.
A word of...
-
2009 Passat CC 2.0 TDI - Underbody Plastic Shield
Does anyone know the part number of the underbody shield /splash guard / belly pan for a 2009 Passat CC 2.0TDI? Just took it off as it was scraping on the ground!
I believe it should have 7 x Torx25 screws holding the sides (3 on each side and 1 at the middle front with clips) and 3 Torx45...Last edited by Deep Blue; 13-12-2020, 04:43 PM.
-
New guy - 2006 9N3 Polo GTI
Just got one 2 months... and it broke.
First it was a coil pack (now replaced with 4 new ones) However, the new coil packs are too long and the spacers make no room for the (what i can guess) is the vacuum system. (researching to see if i can get rid of it).
Checked the oil...
-
Passenger seat doesnt slide forwards or backwards.
My passenger seat doesnt move. After careful inspection, it looks like each rail has two pins that need to be raised. One of the pins on the right rail doesnt come up which is causing the seat to be stuck. I cant remove the seat as its stuck somewhat far back covering the back screws. Any ideas how...
-
Screwing Down A Ply Floor
Hi, I'm about to put in a ply floor in my T6 SWB so I thought I should crawl underneath to checkout where it would be safe to drill through for the screws/bolts. Shock/horror - apart from down near the the spare wheel I couldn't even see the underneath of the floor. I certainly don't want to go removing...
-
Glove box removal.
Hi there from South Africa.
Does anyone have a tutorial or an idea how to remove the glove box on a Gen 1 2008 Tiguan.
The guys who installed the aftermarket head unit for the previous owner forgot to install the top right and lower right screws and now its pulling out a bit...
-
Fan speed resistor change T5
My low speeds on the air con went to lunch the other week so decided to replace it , ordered one from ebay seller in Victoria $11.99 . Arrived today and whilst there was only crap on TV decided to change it at 10.50PM tonight , ten minutes later and all fixed . Only dumb part is VW using a 5.5 mm headed...
-
Really frustrating VW fittings
Not sure if others have had this experience because it could be related to the work I do . Today I fitted a sunroof to a customers Amarok second and now last one I,ll do . The end job looks fantastic but the frustrations with the internal roof lining fittings have made me make a decision not to do any...
-
Glove box latch needed
Anyone have one lying around my any chance. the piece the screws to the dash?
Ship to: Brisbane
-
Mk3 golf VR6 - Air Flow Meter housing
Need mk3 VR6 air flow meter housing ( the tube the actual sensor screws into with 2 screws) , don't care if it has an a sensor in it working or not , let me know , cheers
-
R36 - remove front grill
Hi guys
Having some trouble removing the front silver grill on the R36.
I know there are screws at the top, around 6 or 8 of them that need to be removed, and 2 screws on either side of the licence plate.
After removing these though, and trying to pull the front...
2025 - Below Forum
Collapse
Test Slow
Collapse
