Hi Newbie here, we have a 2014 Golf MK VII. It has a EPC light on and is in limp mode. Our scanner shows a P0222 (b) code which our googling suggests will probably be a throttle body issue.
So questions
1) from that fault code is a replacement throttle body likely to be the...
300 results in 0.0823 seconds.
-
Newbie with a throttle body issue maybe
-
Aircon
Hi
The air conditioning in my Tiguan is having some issues. You have to switch it on and off a few times before it works, and sometimes, it works the first time.
Has anyone had this issue in the past?
Thanks -
Introduction
Hi, I'm Niall I have a 2005 golf that I want to fix a Nox sensor issue that has been bugging me for months -
New member
New member here, when searching a fault code with my dq500 brought me to this forum where someone had the same issue 😎 so hopefully can get some useful information and solve this issue! Basic settings keep cancelling for safety reason on my dq500 gearbox, work step at termination 0 - initialisation.... -
POLO GTI 6C Cracked Radiator
Morning all. Just been informed my radiator has cracked again and needs replacing.
Original was replaced 18 months ago and car has only travelled 15k since and I need another replacement.
No impact but we do live near some speed humps, although I always crawl over them?
Car is tuned... -
-
S-Gearbox control unit DQ381 update Recall code: 34K1
Got the above recall notification when trying to book my MY18 Arteon for a service with VW.
Seems to affect DQ381 DSG built in '17/18.
Issue being an oil pump shaft within the 'start/stop' system that can break without warning and destroy the transmission.
- The software... -
Flashing Glo plug lamp
Hi Folks,
I'd appreciate any comments and suggestions please. I HAVE spent quite a bit of time searching on this matter to no real avail. I have an auto 2012 T5.1, 132kw as below.
Recently the Glo plug lamp has started flashing whilst driving. The first time it happened... -
Clutch pack on auto 110 TSI cost?
Hi,
I had some transmission issue with my golf and just been quoted 4.3k to replace the cluth by VW?
the extended used car warranty will not touch it either as it is a clutch issue where it is not covered under their policy.
has anyone had any similar issues? -
Multivan shaking issue
Hello members.
I have an issue with my nearly 10 years old multivan .
I would like to know if anyone experienced with a multivan some shaking, when the speed is reaching 90k/h up to more or less 105. like the wheel wasn't tighten, or loose.
It starts by light shake... -
Anyone in Adelaide can help with immo on T4?
We're having an immobiliser issue on our 98 T4 Caravelle. I've fixed lots on this van already and I would like to just disable the immobiliser instead of going down the route of replacing this that and the other spending hundreds of dollars on parts that aren't faulty like I did with the ignition issue... -
Hello, owner of T4 Caravelle
Hi. We bought a 98 T4 Caravelle about a year ago. We've put it on club rego and are using it as a weekender van. Aux battery, fridge, RTT, solar panel, plenty of space for the bikes and dogs.
I've joined here as we're having an immobiliser issue. I've fixed lots of this can already and I would... -
Hi from the Blue Mountains/Sydney, T5 Multivan owner
G'day,
I have been reading these forums for many years and figure it is time to sign up.
I love the Multivan as it has been a great van and very functional for many situations.
Currently my mechanic and I are trying to diagnose an issue and running out of ideas,... -
MY18 VW Tiguan 162 Elegance RLine Grey
2018 VW Tiguan 162 Elegance
RLine + Driver Assist Package
Removable Towbar and brake controller fitted. Only ever towed 6x4 box trailer.
Approx 133K Kms
*withdrawn from sale for now - car getting fixed*
Good condition for age. Up to date with servicing from... -
Centre Bore Difference of 0.4mm, is it an issue?
I am looking at putting a set of steel wheels on my T5 and I like the look of the ROH Blac Trak. Only issue is the centre bore size is 65.5mm which is 0.4mm bigger than the T5 hub size. Is this and issue as I doubt a 0.4mm spigot is feasible?
Any feedback much appreciated.
