Hi all,
I recently bought a used 2018 Tiguan, Wolfsburg edition, which has been upgraded with Garrett PowerMax GT2260S, intercooler, Powerteck ECU, and Trans tune from the previous owner.
The main issue I'm facing is sluggishness at the low end and hesitation in the DSG....
230 results in 0.0420 seconds.
-
Retune/remap a tuned wolfie?
-
Is my motor stuffed [thanks for the xmas present son]
Grrrrrr. My 17 year old son took my 07 GT TDi BMM and thrashed the arse off it [after he just blew up the last car i purchased for him].
I'll cut to the chase. Took me a while to diagnose the issue only because I was chasing an electrical fault, but no....the little ^%&* had snapped...Last edited by Supramonsta; 29-12-2024, 05:08 PM. -
Intake Temperature display
Hi all,
I recently bought a 2018 Alltrack.
I can use the center display to show oil temp, boost and water temp. It would be nice to display intake temperature since the dash already shows water temp.
Has anyone heard of this being possible or able to point me in the right... -
Intake fitment for tRoc r 2023
Hi all, i just wanted to find out if anyone has installed a full intake without fitment problems.
First one has a elbow/pipe with breatherhose-
-this intake is rubbing/touching the 3 small hoses ( i think its a secondary vacuum hose?)
-forge like piping with inlet... -
Hello from a brand new VW owner!
Hello Everyone,
First post here. I have joined the forum as I have a 2024 MK8R in Lapiz blue and am doing some research on what mods (if any) to get. I am thinking of intake and potentially a stage 1 APR tune if I can bring myself to compromise my warranty. We also have a 2017 Skoda Kodiaq... -
Cold Air Intake Query
Hi All,
Quick query on a cold air intake: Is there any tangible difference between a $400 ebay system and a $1500 or $2500 system? Are you just paying for the branding and some sort of bragging tax?
Just wanted to double check before I jumped into the wrong end of the pool.
... -
VW Golf engine swap from 1.4L TSI to 1.2L TSI
Hi, so I'm working on my 2010 golf, 1.4tsi 118kw engine, it's running very rough on idle, and i've replaced everything from sparkplugs, to coils, to intake air regulating flap, oil cooler(coolant mixed with oil but not a headgasket issue) and the turbo, but the problem still remains. I was planning... -
Intake Manifold Flap Position Sensor Error
Scanned a friend's 155TSI Tig that had the Check Engine Light on.
Address 01: Engine (CCZ) Labels:. 06J-907-115-CCZ.clb
Part No SW: 06J 906 027 BT HW: 06J 907 309 A
Component: MED17.5.2 04 2133
Revision: P3H07--- Serial number: ... -
Basic intake mod
Something that has always annoyed me on the Arteon is how only one intake inlet is open (AU driver side), while the other side is blocked.
When I had the R600 installed, I thought it'd be opened up, but apparently not. So, today I made up a couple of fins to hold the plastic/rubber...Last edited by nermal; 25-05-2023, 08:57 PM. -
Newbie - Jetta
Im a newbie to the page with a 2016 Twincharged 1.4l Jetta - 3 inch downpipe, 2.5 inch catback with varex muffler, CTS Turbo Intake, GFB DV+ -
GFB Diverter Valve 2020 R-Line Tiguan
Has anyone fitted a GFB T9351 diverter valve with an upgraded turbo intake?
Does look like there is enough room. -
Intro: Me and my Passat 206Tsi
Gday all,
I thought I had introduced myself a long time ago but I guess I did not.
About 18 Months ago I bought a 2017 Passat 206TSI R line Sedan, I have loved the car and cannot fault it.
Recently I got a Stage 1 Revo tune and Leyo Intake with a high flow elbow.... -
Sydney 2017 MK7R
32000km white
287 wkw
intercooler
Trackslag down pipe
Nvidia exhaust
R600 intake
Hpfp
Flow design splitter
Upgraded mib+
$50k
Message me for photos
0405836647 -
R600 Intake - dual scoop/vent options
It seems the R600 intake only uses one side of the grille for direct intake (same as stock). There's a piece of soft plastic/rubber blocking the vent on the passenger side.
Driver side with "scoop":
Passenger without "scoop" (plastic/rubber... -
Carbon cleaning without intake manifold removal
I've done a tonne of reading about decarbonising the inlet on my GTI and was resigned to the fact that the intake manifold would have to come off to do it properly.
Has anyone ever tried this company out? https://carboncleaningaustralia.com/
No intake manifold removal to clean...
