Announcement
Collapse
No announcement yet.
Search Result
Collapse
61 results in 0.0170 seconds.
Keywords
Members
Tags
-
Broken engine mount bolt Mk6 GTI
I have a Mk 6 GTI with 150K on the clock. I maintain it pretty well and am aware of the usual things. You know, a coil on plug sh*ts itself so I replace all four, because the drive home was so heinous I never want to experience that again. All has been good and I just serviced the thing (I do it myself)....Last edited by Jaffs; 13-01-2024, 06:28 AM.
-
Diverter Valve Upgrade - GFB DV+ T9381
I replaced the OEM diverter valve today with a GFB DV+ T9381 - it's an all in one unit with solenoid that completely replaces the factory part.
The GFB DV+ is a more precisely engineered and shorter than the OEM DV (makes installation easier than OEM removal). The OEM DV piston...Last edited by nermal; 10-05-2023, 04:55 PM.
-
EGR and Gearbox Removal
Hi. Does the EGR unit need to be removed when removing the gearbox in a 2011 Amarok?
My crankshaft position sensor failed and when the mechanic tried to remove it he stripped the bolt. To be able to get the bolt out and replace the sensor the only option was to remove the gearbox...
Last edited by Pheadrus; 10-05-2023, 02:45 PM.
-
Elec tailgate actuator bolt
Hi everyone, has anyone got experience with these tailgate motors? The bolt in the hinge has broken that holds the actuator arm to the boot hinge. I’ve removed the hinge and drilled out the broken bolt but I’m struggling to get the actuator arm back to the open position so I can refit the bolt....
-
Wheel lug bolts size
apologies in advance if already covered somewhere, I tried searching and found a gazillion hits but none seem to actually have what I was after..
anyone know the lug bolt sizing for the new Tiguan? I assume they are the same across trim levels, but if not specifically the mk2 R-Lines with...
-
Serpentine tensioner .
Has anyone changed the serpentine belt tensioner on a 2012 T5.1 2.0 turbo , mine is rattling and I thought it was just the bearing in the pulley but sadly not .It seems that the actual spring that holds the tensioner has weakened as it wobbles around when idling . I tried my best to remove the whole...
-
Allen key BOLT trans removal POSITION?
Ive a t4 97 and am replacing clutch, intriguingly no-where illustrates the position of this last bolt (above drive shaft.?) Maybe mine doesn't have one, whatever the reason the tranny wont seprerate from the engine.
Help me! from an already difficult job made impossible.
-
Garret G series bolt on turbos
-
What seats bolt into 2011 Amarok
Just wondering what seats might bolt straight into a 2011 Amarok? Maybe a Tiguan? Toureg? Mine has the typical drivers seat wear and tear.
Thanks
-
Help Please Cavd to Cthd Swap
Hi guys and girls
I am after information regarding swapping out a blown CAVD to a CTHD engine will the CTHD bolt up to my 7 speed Auto?
my intention is to swap all bolt ons to the later engine if possible, would this allow me to use existing ECU etc
has this been done previously...Last edited by WIDGY; 21-04-2020, 03:24 PM.
-
Missing wheel bolt
Car came back from service one wheel bolt short, and the service place isn’t open until Monday.. Is it OK in the interim to drive one bolt short?
-
Wrong wheel bolt spacing?!? Need some advice
Hi guys,
I am new here so I don't know if this is a silly question or not. I recently bought a new set of rims (with the correct wheel bolt spacing of 5X112). I had hit a pothole when driving back from work at night and cracked a rim. I got a new one sent to me by the company that had sold...
-
Spacers Ebay Quality
Hello Forum,
I'd like to know peoples experience with spacers, can someone point me in the right direction of sourcing quality spacers, heres some I've found on eBay, whats the difference with running these in contrast to something like the ECS bolt on spacers
4PCS 5X100 Wheel Spacer...
-
Caddy Standard Steel Rims
G’day,
Does anybody know if standard steel wheels off a 2005 Caddy will bolt straight up to a 2016 Caddy?
Cheers
2025 - Below Forum
Collapse
Test Slow
Collapse
