Tweet
The left sliding door does not open or close without force. The electrics have failed, the cables are intact (although they maybe stretched due to manual operation), the middle height adjustment maybe an issue (because of cable replacement), the fuses are intact and the door switch contacts are clean. I've read in other forums that the PCB becomes corroded causing them to fail until they are replaced. I've looked for the location of these boards in the left inside around the jack (there are a few wires, plugs (red, beige, yellow) and sockets towards the back) and also in the right around the rear heater fan unit (nothing visible). Where should I be looking for these boards?
1 of 2
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2
Welcome to the new look VWWatercooled
After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.
See more
See less
-
-
Have I posted in the wrong forum? -
The forum does seem a bit quiet! One of my sliding doors has failed a while ago. I bink with mine the problem seems to be the outside handle not triggering an electrical response. If you pull the outside handle halfway there should be a bit of resistance from engaging the little lever inside the door that the outside handle pulls on.
I’ve just bought an actuator from a wrecked T6. I’m hoping to fit the part tomorrow, I will post result and will take a few diy photos as well.Comment
-
The replacement actuator fixed the door on mine !Comment
-
Found broken plastic piece inside old actuator.Comment
-
I'd expect there's no user-serviceable components in the actuator?Comment
-
No not really. About $500 new, paid $250 from wreckerComment
Comment