New Polo problems - Register

[trauts]

Thanks Hillbilly! love the German engineering and dedication to safety.

I was getting use to having the air conditioner on recycle from working in remote WA, where it's a requirement to try and keep the cabin pressurised and as much dust out as possible.

[Sword_Dude]

If your rattle sounds like a clicking sound coming from both sides (almost like morse code) then I have a similar problem, VW techicians have been in the car and believe its coming from behind the trim near the rear setbelts. They are taking it back to have a closer investigation in early January the car is booked for 2 days. and they are giving me a loaner.

Car is finally in today to have this looked at, I will let you know how this is resolved.

[Guest001]

Thanks Hillbilly! love the German engineering and dedication to safety.

I was getting use to having the air conditioner on recycle from working in remote WA, where it's a requirement to try and keep the cabin pressurised and as much dust out as possible.

It can only pressure up so much anyway because most cars have hidden flaps in the rear somewhere to let air out.

In my Cruiser they used to pop when I shut the doors. Due of course to the excellent sealing in Toyota products LOL

[Guest001]

Car is finally in today to have this looked at, I will let you know how this is resolved.

Further to mine Its rattling worse since Thursday when an idiot pulled out of a side road right across in front of me when I was doing 100kph.

Managed to just miss him but now rattle in the back is quite markedly worse. Unsure if its something inside the car or suspension or rear subframe.

Will have a look when weather cools enough to go outside. LOL

[gavs]

New Polo problems - Register

Pull out all the spare wheel and associated tools and foam holders etc, then go for a drive. If it is still there, unfold the rear seats so they are flat, if still there, rove the actual seats and seat backs. If still there, check the door strikers are tightened (both passenger ones were loose in mine) then if still there, let the dealer find it

[Guest001]

Pull out all the spare wheel and associated tools and foam holders etc, then go for a drive. If it is still there, unfold the rear seats so they are flat, if still there, rove the actual seats and seat backs. If still there, check the door strikers are tightened (both passenger ones were loose in mine) then if still there, let the dealer find it

Have tried most of that and its in behind the left panelling Seat folded down when was stopping Checked door and seat strikers and taped them with electrical tape. It rattled from new regardless of seat position.

Took it to dealer who removed shockie as it was worse a while ago with about 80kg in the boot

They wanted $146 an hour to look any further So much for them Have bough some removal tools and will wait for cooler weather as the concrete in the garage is a bit hot to lie on at the moment LOL

[alexaescht]

What/where are the door strikers?

[Guest001]

What/where are the door strikers?

They are the pegs that the door locks engage when you shut the door and are adjustable. If incorrect door can move and rattle and if bolts loosen the same will happen Look when door opens they are a U shaped heavy wire attached with two recessed bolts or torx screws.

[alexaescht]

New Polo problems - Register

They are the pegs that the door locks engage when you shut the door and are adjustable. If incorrect door can move and rattle and if bolts loosen the same will happen Look when door opens they are a U shaped heavy wire attached with two recessed bolts or torx screws.

Thanks

[sVWatt]

Car is finally in today to have this looked at, I will let you know how this is resolved.

Mine intermittently makes a noise from behind the trim by the seatbelt feed at ear height. Hope you get a fix, so I can move on mine

[Melon Head]

100km on the clock, no problems so far. :-P

[Sword_Dude]

I got the Polo back this afternoon and it is rattle free.

They ended up test driving the car with a tech in the boot. Noise coming from wheel arches. Put car on hoist removed wheels, cleaned and greased hubs, removed shockies, cleaned and greased top mounts, put it all back together and Bob's your uncle, stealth mode, whoooo-hoooo, no rattles, also fixed properly the fuel line rattle that Austral did a half assed job on.

I am an even happier driver again.

I hope this helps everyone who is getting the clicking morse code sound from around the "c" pillar.

good luck

[danielv10]

Was your clicking noise a metallic sounding one ie. metal on paint kind of sound?

Thanks for the info. Mine is driving my up the wall!

[alexaescht]

New Polo problems - Register

I got the Polo back this afternoon and it is rattle free.

They ended up test driving the car with a tech in the boot. Noise coming from wheel arches. Put car on hoist removed wheels, cleaned and greased hubs, removed shockies, cleaned and greased top mounts, put it all back together and Bob's your uncle, stealth mode, whoooo-hoooo, no rattles, also fixed properly the fuel line rattle that Austral did a half assed job on.

I am an even happier driver again.

I hope this helps everyone who is getting the clicking morse code sound from around the "c" pillar.

good luck

Mine has I think the same noise at yours did. It is only present on the drivers side c pillar near the back seat seatbelt reel thingy. I think it might be related to the shocks because it happens over bumps (obviously). The noise I get is a very quiet, but very annoying, 'tick'. It's certainly not related to the rear seat itself because it's still there with the seat folded down.

I'll see what the dealer can do when we get rear the door seal replaced (it was cracked since delivery).
Alex.

[trauts]

Can anyone hear outside wind noise when doing around 100km/h with the windows shut and radio off, it's only the faintest of noise but annoying!
Would this be something I could ask for as warranty work or would they laugh in my face?