If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
How this all came about I was trying to activate the road Sign recognition on my my18 206 Passat. One of the things it had to have was a front camera (242 A5). I know that I have the 242 but the readout from the OBDeleven does not say that it is version A5.
The coding that was elsewhere did not work so I was wondering if the camera or other unit's involved are different from the required ones.
A5 is the canbus address of the module.
242 is the software version.
Go to the module you are interested in in obd11 and then go to info.
It will give you hardware and software numbers etc
Sent from my HTC 10 using Tapatalk
2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC| 2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500
Comment