Dynamic Light Assist

[zzc2010]

MY Tiguan doesnt beep or anything at all with TSR

Probably they fixed it on the later models then.

What’s your firmware version of A5 module?



Sent from my iPhone using Tapatalk

[Guest001]

Mine picks up any speed signs it sees, slip road exit speed signs, etc.


Sent from my iPad using Tapatalk

So does mine its the ones that ARENT there that are a bother, as in cruising through 80k roadworks and all of a sudden it says 40k and alarm goes off

[Guest001]

Probably they fixed it on the later models then.

What’s your firmware version of A5 module?



Sent from my iPhone using Tapatalk

Hardware version H09

Software number 3Q0980654A

Software version 072

serial 31071812k12020

[phonebooth]

Hardware version H09

Software number 3Q0980654A

Software version 072

serial 31071812k12020

Mine doesn't chime but has a visual alert in the AID just after I start driving.

[zzc2010]

So does mine its the ones that ARENT there that are a bother, as in cruising through 80k roadworks and all of a sudden it says 40k and alarm goes off

You can turn off the alarm in your settings.

The car should decrease the speed from 80 to 40 if yours is working when using ACC.

Yours probably is not.


Sent from my iPhone using Tapatalk

[zzc2010]

Mine doesn't chime but has a visual alert in the AID just after I start driving.

The chime is off then.


Sent from my iPhone using Tapatalk

[phonebooth]

The chime is off then.


Sent from my iPhone using Tapatalk

What makes you say that? Hillbilly has the same. My chime works for everything else; seat belts, doors, gear, ignition etc.

[zzc2010]

What makes you say that? Hillbilly has the same. My chime works for everything else; seat belts, doors, gear, ignition etc.

So you two’s working or not?

Is it in fusion sign detect?

Errors when drive off little bit or start up?


Sent from my iPhone using Tapatalk

[Guest001]

You can turn off the alarm in your settings.

The car should decrease the speed from 80 to 40 if yours is working when using ACC.

Yours probably is not.

Is it in fusion sign detect?

Errors when drive off little bit or start up?


Sent from my iPhone using Tapatalk

It s the overspeed alarm for whats on the roadsign and Ive reset it to much higher so I dont get it as much but having to have it 50 over is a bit much

Mine had to change from Road sign Fusion to just Road sign detection to make it work in A5 Adaptation /Road sign detection Fusion Mode

[phonebooth]

So you two’s working or not?

Is it in fusion sign detect?

Errors when drive off little bit or start up?


Sent from my iPhone using Tapatalk

My TSR works fine. It just doesn't chime when I drive away, only a visual alert. It's in "Road Sign Detection" not Fusion.

[zzc2010]

My TSR works fine. It just doesn't chime when I drive away, only a visual alert. It's in "Road Sign Detection" not Fusion.

Then we are on the same page man.

Only a working fusion TSR is fine.

We are keen on getting TSR to work in fusion.


Sent from my iPhone using Tapatalk

[zzc2010]

It s the overspeed alarm for whats on the roadsign and Ive reset it to much higher so I dont get it as much but having to have it 50 over is a bit much

Mine had to change from Road sign Fusion to just Road sign detection to make it work in A5 Adaptation /Road sign detection Fusion Mode

Same page.

I’m talking about a working fusion TSR.


Sent from my iPhone using Tapatalk

[Guest001]

Same page.

I’m talking about a working fusion TSR.


Sent from my iPhone using Tapatalk

You are talking confusion. What do you actually mean TSR with GPS as well as camera.

[Guest001]

Just been up the road a little way where there are several different speed zones Heres what happened.

Took off No speed signs Car showed 60 (correct) But!!! no sign

Left shops showed 60 still correct Turned corner onto main road NO SIGN Changed to 70 as I turned.
200m around sweeping corner is the 80 sign stayed at 80 and popped up the "TSR is working in restricted mode" NO SOUND
Turn into off ramp changed to 70 NO SIGN Get to the 80 sign and it changes up.
Shortly after is the 60 sign which it changes to correctly.. It didnt pick up the 100 sign on the left of the right hand road going to the motorway

WTF is going on as it changes to speeds that arent there without a sign anywhere

GPS has historic speed areas still in it?????????. A bloody mystery as it has done the same on the highway at roadworks where it has changed to speeds not shown and no signs to indicate speed anywhere in vision

Heres where I travelled from bottom left to Coles then up to intersection at top centre then left across

and down slip road back to bottom left

Google Maps

[Wynnston]

Just been up the road a little way where there are several different speed zones Heres what happened.

Took off No speed signs Car showed 60 (correct) But!!! no sign

Left shops showed 60 still correct Turned corner onto main road NO SIGN Changed to 70 as I turned.
200m around sweeping corner is the 80 sign stayed at 80 and popped up the "TSR is working in restricted mode" NO SOUND
Turn into off ramp changed to 70 NO SIGN Get to the 80 sign and it changes up.
Shortly after is the 60 sign which it changes to correctly.. It didnt pick up the 100 sign on the left of the right hand road going to the motorway

WTF is going on as it changes to speeds that arent there without a sign anywhere

GPS has historic speed areas still in it?????????. A bloody mystery as it has done the same on the highway at roadworks where it has changed to speeds not shown and no signs to indicate speed anywhere in vision

Heres where I travelled from bottom left to Coles then up to intersection at top centre then left across

and down slip road back to bottom left

Google Maps

The Fusion part means that it's fusion between GPS data and Camera Data. The Camera data is fine but the additional meta data is missing in the maps data for the speed, despite showing it in your main GPS screen. Unless they put the right information in the mapping data for AUS (I highly doubt it) then you're not going to get fusion working without it complaining. *EDIT* I think it has the right data in maps for highways/motorways, just not streets.