Request a Passat owner MY09 or later with Dynaudio system

[kamold]

Hi All,
I'm after an owner of a MY09 or later Passat with Dynaudio option.
I need the part number of the amp under the passanger seat as well as a picture of the connector/harness if possible.

Can anyone assist?

Thanks

[Passat R36]

http://www.vwwatercooled.com/forums/f27/fyi-my10-r36-dynaudio-amp-wont-p-n-p-96918.html?highlight=

I bet you have the same amp as mine right?

[kamold]

Yeah the one with a single connector, not two

[sportpaket]

Here are 2 photos from my 2011 Passat wagon with Dynaudio. Can't see any serial numbers without removing from the mount unfortunately & I'm not too keen to take the connectors off either in case the car forgets it has an amp!

Hope this is of some value anyway.

[kamold]

Thanks very much for that 2 plug harness then for Dynaudio, single for VW sound system amp from MY09 on it would seem.

[Heinrich R36]

I don't know if the link below to a guy doing an install on a CC is of any use but I am still keen on finding a way to retro fit the Dynaudio system in to R36 with the single plug.

My R36 is the same with the later model single connector CBX RNS510 & Accessories: Dynaudio Retrofit

[kamold]

Thanks I have read his work. I've posted links to a full harness which will allow a fairly painless install.

[Heinrich R36]

Oh ok so this will be possible then ?

I even spent last night going through forums in Germany reading through everything they had and could not find much info , if anything they would be referring sometimes to the info on our forums or elsewhere to gain a better understanding with certain mods.

[kamold]

Yeah its totally doable but not a trivial exercise. The whole wiring loom from head unit to all speakers and battery etc needs to be swapped out (or spliced to just replace the amp connectors.)

[Heinrich R36]

Yeah I came across pigtails for the Lear AMP on ebay for $30 I was thinking they could be wired in to the existing loom .

[kamold]

There has to be someone in Europe who makes a pnp connector, or could make one if they wanted to...just haven't come across them yet.