Front Light Assist and Dynamic Light Assist

[booba]

Hi All,

I am currently retrofitting Dynamic Light Assist to my B7 Passat.

I can detail the coding required for both DLA and FLA if anyone is interested.

There is no additional hardware required for FLA is you already have the Driver Assistance Package.

For DLA, you will need to purchase different headlights units which I have in my possession.

I did try to enable Sign assist however it doesn't recognise Australian speed signs, didn't think that it would but worth a shot.

Boobs.

[cru22z]

Hi
I have the driver assistant package with the HID that moves when I turn my steering. What is the DLA And FLA?

[Guest001]

Hi
I have the driver assistant package with the HID that moves when I turn my steering. What is the DLA And FLA?

You should have both. I have. FLA is swiveling headlights and DLA is the corner lights coming on when indicators are going ( I think)

They are both part of the driver assist package

[booba]

Nope. Swivel lighting is something else. FLA is the auto highbeam/dimming.

[Guest001]

Nope. Swivel lighting is something else. FLA is the auto highbeam/dimming.

SO share with us what DLA is We are breathlessly waiting LOL

[booba]

from a vw website: Dynamic Light Assist optimises illumination of the carriageway for even greater safety on the road.

The system with variable road illumination allows the main beam to be left on continuously without dazzling oncoming traffic. This is possible thanks to a masking function which can partially dip the main-beam headlights. The information on other road users and the street lighting is captured by a camera on the interior mirror and relayed to the Dynamic Light Assist system. This significantly improves illumination of the entire carriageway.

Dynamic Light Assist produces a brand new lighting sensation that is always perfectly tailored to the traffic situation.

Note that you need additional hardware for DLA. you can have FLA for free with coding of A5 controller. There is no a smart arse about it. i merely asked if anyone was interested and i will let you know the coding. I am not going to bother documenting it if no one cares and you probably don't.

[Guest001]

from a vw website: Dynamic Light Assist optimises illumination of the carriageway for even greater safety on the road.

The system with variable road illumination allows the main beam to be left on continuously without dazzling oncoming traffic. This is possible thanks to a masking function which can partially dip the main-beam headlights. The information on other road users and the street lighting is captured by a camera on the interior mirror and relayed to the Dynamic Light Assist system. This significantly improves illumination of the entire carriageway.

Dynamic Light Assist produces a brand new lighting sensation that is always perfectly tailored to the traffic situation.

Note that you need additional hardware for DLA. you can have FLA for free with coding of A5 controller.

I think mine has it as it is supposed to dip when it sees oncoming headlights Have tried it and not entirely sure it works.

It has the camera in the mirror not sure what its for though

[2VWs]

The camera is probably for lane assist. I'll have to test out if auto dipping of the main beam occurs (as it does in the Lexus which seemed to me to have a lag. Maybe this is due to light intensity).


Sent from my iPad using Tapatalk

[Guest001]

The camera is probably for lane assist. I'll have to test out if auto dipping of the main beam occurs (as it does in the Lexus which seemed to me to have a lag. Maybe this is due to light intensity).
Sent from my iPad using Tapatalk

Lane assist camera is mounted below the mirror against the screen I thought. Is definitely a camera there in a triangular aperture.

Unless Ive got things well and truly confused

[2VWs]

I'll try to ask a dealer later this week and post a reply if the explanation is sensible.


Sent from my iPad using Tapatalk

[booba]

Australian delivered passats do not come with the front light assist or high beam assist. you need to code it. go into controller A5, Byte 2 and ensure that it is set to 01. Once this is turned on then reboot the car. you turn the feature on now with a single push forward of the left stalk and a headlight type symbol will appear just above the odo. your high beams will now turn on automatically at 70km/h and turn off when it detects cars, street lights etc. the headlight switch also needs to be in auto mode. turning them to full on or parkers will disable this feature.

[booba]

oh, the camera in the front is for lane assist, traffic sign recognition, high beam assist or sometimes known as front light assist and also for dynamic light assist.

you can turn on high beam assist/front light assist if you have the camera
you cannot turn on dynamic light assist unless you replace your headlights with the following models

gas discharge headlight with dynamic main beam light control (left-hand traffic only) - LEFT 3AC 941 043
gas discharge headlight with dynamic main beam light control (left-hand traffic only) - RIGHT 3AC 941 044

i have attempted to flick the byte for traffic sign recognition however it didn't recognise australian street signs.

Here is the coding for anyone who is interested

Dynamic Light Assist and Front Light Assist - Headlight replacement and Driver Assistance Package required at least for au delivered passat

Controller A5, Byte 2, Check bit 1
Controller A5, Byte 2, UnCheck bit 0

Controller 09, Byte 11, Check bit 3
Controller 29, Byte 29, Check bit 3

Front Light Assist / High Beam Assist

Controller A5, Byte 2, Un Check bit 1
Controller A5, Byte 2, Check bit 0

I won't bother with traffic sign recognition unless i can get it to work.

[toto]

Anyone in Wollongong NSW able to do the high beam assist coding. Always liked the sound of that feature as we do a lot of night driving, but unfortunately do not have access to the right equipment for coding. Never understood why they didn't activate it on Aust delivered Passat a with driver assist package.

Will pay in beer or other bootleg items

[Guest001]

oh, the camera in the front is for lane assist, traffic sign recognition, high beam assist or sometimes known as front light assist and also for dynamic light assist.

you can turn on high beam assist/front light assist if you have the camera
you cannot turn on dynamic light assist unless you replace your headlights with the following models

gas discharge headlight with dynamic main beam light control (left-hand traffic only) - LEFT 3AC 941 043
gas discharge headlight with dynamic main beam light control (left-hand traffic only) - RIGHT 3AC 941 044

i have attempted to flick the byte for traffic sign recognition however it didn't recognise australian street signs.

Here is the coding for anyone who is interested

Dynamic Light Assist and Front Light Assist - Headlight replacement and Driver Assistance Package required at least for au delivered passat

Controller A5, Byte 2, Check bit 1
Controller A5, Byte 2, UnCheck bit 0

Controller 09, Byte 11, Check bit 3
Controller 29, Byte 29, Check bit 3

Front Light Assist / High Beam Assist

Controller A5, Byte 2, Un Check bit 1
Controller A5, Byte 2, Check bit 0

I won't bother with traffic sign recognition unless i can get it to work.

Perhaps I could get you to do mine in the near future I don't go out much at night but might as well get it done TIA

PS I was being Jocular when I asked you to share with us.

[booba]

Sure, yeah and no hard feelings, i was just being a see you next tuesday.

Perhaps I could get you to do mine in the near future I don't go out much at night but might as well get it done TIA

PS I was being Jocular when I asked you to share with us.