A few weeks ago I changed the oil in my 200k km 2014 Tiguan, at the same time I replaced the Upper Timing Chain Cover Gasket 06H103483 and Timing Chain Cover Gasket for Magnet N91000101 as they were leaking oil. The car then had some sensor issue which I fixed by removing the oil filter and refitting the cable to the sensor behind it.
Yesterday it started to run terrible, after connecting the OBD scanner, I found it had a misfire on cylinder 1, when I removed the coil pack for cylinder 1 there was petrol in it and around the spark plug, so I replaced all the spark plugs and the car ran fine, then today I have the ECU light on, reading "00016 'A' Camshaft Position Actuator Circuit/Open (Bank1)", no other codes. I am wondering if I moved some cables in the process that are now throwing this error, the car drives fine.
Any recommendation on where to start?
Yesterday it started to run terrible, after connecting the OBD scanner, I found it had a misfire on cylinder 1, when I removed the coil pack for cylinder 1 there was petrol in it and around the spark plug, so I replaced all the spark plugs and the car ran fine, then today I have the ECU light on, reading "00016 'A' Camshaft Position Actuator Circuit/Open (Bank1)", no other codes. I am wondering if I moved some cables in the process that are now throwing this error, the car drives fine.
Any recommendation on where to start?
Comment