The Pcv has started to leak on the 3.2 vr6. Where’s the best place to get the diaphragm?
What else will I need? Rocker cover gasket, inlet gasket, something to clean the inlet valves?

Hi guys, so took my mk7 tsi to get serviced at a new place and they said that my mechatronic pan gasket is leaking. They gave me a quote to replace the pan gasket for $700. Wondering if this is necessary to fix or a big issue? If it is 3 hours labour a fair amount to be paying.

Thanks

A few weeks ago I changed the oil in my 200k km 2014 Tiguan, at the same time I replaced the Upper Timing Chain Cover Gasket 06H103483 and Timing Chain Cover Gasket for Magnet N91000101 as they were leaking oil. The car then had some sensor issue which I fixed by removing the oil filter and refitting...

The very Kind Engine Engineers made the EGR pipe so easily accessible, I had to fit a reducer..

So far So good, no ECM light. Tried to upload a pic, not allowing me.

I reckon I halved the hole size in the stainless steel gasket, where the EGR pipe bolts to the Cooler. ...

So my MY16 Multivan has been diagnosed with a most likely head gasket issue between cylinders 2 and 3. It's got 200 and something thousand km on it, is this classed as within normal wear and tear limits for these vehicles?

Gday All, thanks for letting me in. Just an old bloke who mucks around with cars. Looking forward to hopefully getting a bit of knowledge on the T4 Transporter Combie. My Sister inlaws Transporter just did a head gasket and Im looking for a new donk for it or if anyone can recommend an engine reconditioner...

Hey folks,
I have just got hold of a 1994 T4 2.5L Petrol to set up for my daughter as a camper van. There's a bunch of stuff to sort out - engine mounts, gear linkage, suspension etc, however the engine - although looking initially really healthy (compression readings were all up around 240psi...

I'm finding it very difficult finding a good range of VW parts, including aftermarket, in Australia, at reasonable prices. Dealers are pricey.

Seems like ECS, RKXTech and other USA sites are good suppliers but you're waiting weeks to get them.

eg. A valve cover gasket for V6...

My first post so hope it makes sense. I'm repairing a Golf TDI with the BKD engine. My local spares store have ordered a 3 hole head gasket to refit the head along with new bolts.

My concern is that the original head gasket is the 2 hole so is marginally thinner than the new gasket....

G'day Folks,

Just acquired my first ever VW, a project car . It's a 1.9L tdi manual MK5 Golf, engine code BKC. Suspect the head gasket is blown due to not being installed properly, have got a new gasket and bolt set on the way. Head itself is new.

I'm here to ask for a step...

Hi I have a transmission leak as pictured I have been quoted $550 to fix this but am wondering if its straightforward to fix myself. As am fairly mechanical and done lots of work on all sorts of cars just nothing front wheel drive with this fancy dsg thing. Does anyone know where I can get a repair...

Happy new year everyone…


I had a water leak on my B7’s oil filter housing and decided to repair the leak myself. After removing the assembly, I have found damaged gasket groove causing the gasket to dislodge and water to leak.

If anyone who have access to technical...

Hi,I have the following items for sale;

New Parts

Coil on plug units PN - 022 905 715 B $65 each, I have two
Cylinder head bolts, pn - 022 103 384 M, $10 each, I have 21 of them
Fuel Pump Gasket PN - 919 133A $15
Exhaust manifold gasket, PN - 022 253 039 E...

Question concerning cam cover gasket renewal. Other than putting a little dab of sealant at each of the four corners before putting the gasket down, does the gasket fit as is onto the mounting grooves alone, without any other sealant? I've seen loctite hi tack gasket sealant spray being used to treat...

Anyone have an oil pan gasket laying around from melbourne?